General :: Grub - Cannot Boot Netbook With USB / SD Card
Feb 23, 2010
I have an unbranded netbook (N270, 1GB RAM, 160GB HDD, no disk drive). This netbook had a strange, unusable Linux installation, which did not allow any possibility to modify anything on the machine. I could not even use F2 to get into the BIOS. F2 was the only key I could use to get a boot device option. I wanted to wipe off that Linux installation and install Windows 7 (reading some instruction from the net, using USB drive or SD card). I have done a similar installation on another netbook and it worked OK. On this machine though, I could only see "GRUB" when I tried to boot using USB or SD card. Later, I used UNetBootIn on SD card to load Ubuntu LiveCD.
This time it worked and I though of installing Ubuntu on this machine instead of Windows7. I chose to use the entire HDD, thereby, wiping the old original Linux installation. The installation went well and I wanted to start Ubuntu from the HDD. But it only ended up in a "C" with a blinking cursor. Laterwhen I tried to boot from the same UNetBootIn SD card, all I get is a "GRUB" with nothing else. The same happens when I try to boot from the USB drive with the Windows 7. I am left with no bootable OS on the netbook, no way to get into the BIOS, no possibility to boot from USB or SD card.
View 1 Replies
ADVERTISEMENT
Mar 18, 2011
I have a DL380 G3 HP server and I need to attach a 1TB hard drive. Of course the server only accepts SCSI and since I don't have a few thousand pounds to splash about I am looking at alternate methods. What I have done so far is buy a PCI SATA raid card and attach the 1TB drive to it. The BIOS seemed to be playing nice detecting it and allowing me to select the card. But it won�t see the drive.
Funnily enough though when I installed Linux on the SCSI drive during the install it saw the 1TB just fine and I could write to it. This has led me to believe that I could use GRUB (installed on the SCSI) to boot the 1TB as the hardware setup is working but the BIOS just can't handle it. So here I am with no real knowledge of GRUB. I was hoping someone could tell me where to begin with this and if it is even possible
View 3 Replies
View Related
Aug 16, 2010
I have a T61 with Windows 7 and Ubuntu on it and it works great. I also have a HP Mini 5102 with Windows 7 on it. I deleted the HP_RECOVERY partition and merged with my Windows partition because you can only have four partitions. I got Ubuntu Netbook Remix on a thumb drive and I installed it by telling it I want to pick between them at boot up. However, when I boot up my netbook it just goes right into Windows, no Grub. Here is what my fdisk -l looks like.
[Code]....
how I can get Grub running on this thing would be great.
View 8 Replies
View Related
Dec 26, 2010
I recently bought a netbook on which Windows 7 Start Edition was installed. I partitioned the disk to install 2 other linux distributions : Backtrack 4 and Debian Lenny. Here is my partition scheme :
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc6a9bf3e
[Code]...
Partition table entries are not in disk order During both of the installs, I chose to install Grub. Unfortunately, when I start my netbook, it launches Windows 7 automatically and I do not see grub...
View 6 Replies
View Related
Jul 10, 2010
I installed Ubuntu netbook remix 9.10 and it ran fine. However, the boot menu is hidden and by default it always boots into Ubuntu (I don't know.. maybe the timeout was 0). I wanted to switch to a different kernel so I compiled a new kernel and installed it. But upon reboot it would always boot into the old kernel. So I updated grub and made the new kernel the default.
Now the new kernel is givine me a kernel panic and I can't access my system because the grub boot menu doesn't show anything (just boots into the newly compiled kernel and gives me a panic message). I don't have a recovery cd/usb. Is there a way for me to somehow slow grub down or show a menu? Pressing esc at boot doesn't help.
View 3 Replies
View Related
Sep 4, 2010
Just took off Ubuntu in anticipation of selling my netbook. Windows XP is on the hard drive. GRUB refuses to see Windows. How do I go about making GRUB find Windows or just remove it completely?
View 5 Replies
View Related
Apr 4, 2011
I have a distribution called Easy Peasy on my netbook, it's Ubuntu-based.Today when I started it up it told me 'grub corrupt'. On subsequent start-ups it displays 'unknown filesystem.' I'm given a prompt labelled 'grub-rescue>' but I can't get any commands to work I've tried booting off a Live CD of Easy Peasy. That works fine, but I can't get to my files. I've tried using a program called photorec and it can recover files from the drive but it dumps out gigs upon gigs of unlabelled files, many of which are things like system files or web browser cache -- I only have a few dozen text files I actually need, so this is pretty unworkable.
I'm trying to reinstall grub, which I understand to be part of the booting process, but I've had no luck; any set of instructions I've followed has inevitably run into some error or a step I don't understand.How can I get at my files in an easy to recognise way (such that I can navigate the original directories and get what I want)? OR
How can I easily reinstall grub such that I can just use the system like before without having to reinstall everything and lose my files?I think my drive is sda or sda0. In grub's device.map it's called hd0.
View 3 Replies
View Related
Jan 30, 2010
I have a toshiba netbook, and I'm running linux slackware 13.The sound card is an HDA intel.So far I've ran alsaconf and configured the above mentioned sound card. I've also gone into the alsamixer and unmuted everything and turn the volume up.I get absolutely no audio.
View 15 Replies
View Related
May 16, 2011
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies
View Related
Apr 1, 2010
I installed a new graphics card (Nvidia GeForce GT240 1 Gb, 128bit DDR3) on my gigabyte VA900M motherboard, with my computer running a dual boot of windows 7 (64 bit) and ubuntu 9.10 (64 bit). The computer would not boot past the memory test stage. To solve this, i flashed the BIOS with the latest upgrade for the motherboard from the Gigabyte website. This still did not work, so, doing the usual "testing hardware combinations by unplugging and replugging", I removed 1 Gb of RAM, which solved the problem of booting past memory test (a case of too much memory?)
Problem: The problem now is, GRUB wont boot from the HD, unless I have the Windows 7 disk (or Ubuntu Live) in the DVD drive. If i dont press a key to boot from the disk, Grub will then load. how to make GRUB boot from the HD? Do I need to redirect/reinstall GRUB? Im pretty sure it is not a BIOS problem.
View 2 Replies
View Related
Mar 17, 2010
i ahve to boot it from the command like an executable but i dont know how to exactly and when i thought i had it figured out i didnt know how to write the name of the file in the disk ubuntu just kept saying file or directory not found
View 14 Replies
View Related
Mar 5, 2010
I bought a Samsung N150 netbook with the idea that I would install Linux on it.Now that I have it, I learn that it will *only* boot from the hard drive. there any Linux distribution that can install itself on this machine? Preferably in a separate partition allowing boot to either Linux or Win 7.This needs to be a high confidence installation, because if the existing Win 7 installation is screwed up there appears to be no way to recover.
View 14 Replies
View Related
Apr 21, 2011
I have a 160 GB Spaced 'HP Mini 1000' partitioned to two 80 GB drives. On one of them, Windows XP is already installed.
I would like to create a dual boot so that the other empty drive has Ubuntu Netbook edition 10.10.
I am a newbie with Linux, well versed with Windows and decided to venture with learning Linux by doing this.
So far, I have just downloaded the Netbook Edition from the following link.
[url]
How should I go about installing the Ubuntu netbook edition to dual boot with XP?
View 2 Replies
View Related
May 13, 2011
I currently have an Acer Aspire One netbook 120GB drive which came with Linpus lite preloaded. I have set-up dual boot a year or so ago. It now dual boots to either Linpus or Vista (yes I know!) via the Linpus grub.conf ( I got the instructions I think from here: [URL] I want to get the latest Ubuntu 11.04 build on this as a third boot option. If this work OK I may ditch the Linpus or Vista build at some point. So I've used Gparted on a USB drive to setup up three extended Logical Partitions (sda5, 6 and 7).
I then loaded Ubuntu s/w via an external drive with
/boot on 100MB /sda5
Swap on 1GB /sda6
/ on the 40GB+ /sda7
When I was asked for the bootloader location in the Ubuntu install gui I chose /sda5 (out of complete ignorance) All fine at this point. What do I have to get the linpus lite /boot/grub/grub.conf to see and start ubuntu?? Or is there something else I need to do?? Also, how does Ubuntu know which swap partition to use, as there is already one for the linpus lite install.
View 14 Replies
View Related
Oct 28, 2010
my play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?
View 14 Replies
View Related
Aug 30, 2010
Why i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
View 1 Replies
View Related
Nov 24, 2010
I'm a linux/unbuntu n00b and having some major issues here. I am new to using Ubuntu and have been experimenting with it on my netbook as well as kubuntu and a few others. I love the linux alternatives to Windows. It started with me running Windows 7 Starter along side Ubuntu. I was trying to resize my Windows partition and give Ubuntu more space. I managed to somehow delete the wrong partition, making a very careless mistake. Long story short, my netbook is stuck at the grub rescue screen and I have been searching the net for about 3 hrs just tonight plus whatever time I spent last night searching and cannot get this fixed. I've tried booting from the flash drive using Unetbootin and it will say "Missing operating system" before the grub rescue prompt and I did change my boot sequence. I've also tried using some commands in grub rescue and got various messages such as, no such disk, no such partition, cannot find "grub_xputs", cannot find C/H/S values...
I have a Gateway LT21 netbook with a 250gb hdd. Any help is appreciated. I realize this is a common issue and has been posted a lot but I have searched and my issue is on going and I'm guessing its specific to my setup.
View 5 Replies
View Related
Dec 31, 2010
I have a acer aspire one netbook which was duel booted with the latest version of Ubuntu but as i've stopped using the netbook as much and my family use it more, i removed ubuntu for them. But i just deleted the partion and now i am stuck with the grub luncher when i boot up saying Grub Rescue, partion not found, i can only boot via USB as its a netbook!
View 3 Replies
View Related
Dec 20, 2010
Problem: I have installed two Ubuntu servers, 10.04 32-bit and 10.10 64-bit, in a multi-boot environment (also have FDOS and WinXPsp3). The 64-bit will not boot because grub can't find the UUID for the disk with the 64-bit system.
Brief Background: Installed 10.04 LTS two months ago with no problems. 10.04 is in a primary partition on hda with FDOS.
Installed 10.10 (64-bit) in a new primary partition on the same hd. The install seemed to go ok, but the MBR and the fs on the 10.04 were corrupted; could not boot. Restored drive, and rebuilt grub.
Installed 10.10 on separate hd (hdb). In grub step all OS's were recognized so I pointed the grub to hda. Grub failed to boot.
Rebuilt grub from 10.04 on hda. All systems recognized but 10.10 will not boot because it says it cannot locate the UUID specified.
Compared the grub.cfg for both systems, the UUID specified for hdb is the same. Also, when I mount the drive for 10.10 on the 10.04 system the drive UUID is consistent.
I know I must be missing some thing, but I know not what. Have searched and can't find any clues. All other OS's boot ok.
Hardware: AMD64 4GB, 2 internal IDE drives (hda and hdb), 1 internal SATA (hdc WinXP), various USB and Firewire Drives (no bootable systems).
View 6 Replies
View Related
Nov 1, 2010
I'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
View 8 Replies
View Related
Jun 25, 2011
i installed slackware then i unistalled it and installed debian then i decided to go back to slackware but it wont boot because i have the grub boot loder how do i fix this
View 2 Replies
View Related
Sep 9, 2010
I install Ubuntu from an installation of Ubuntu, rather than using the installation CD?Specifically, I have Ubuntu 10.04 installed (and bootable) on an SD card, and would like to install from Ubuntu (running on the SD card) to the netbook's hard drive.
View 2 Replies
View Related
Nov 29, 2010
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Jul 3, 2010
I just recently installed a kernel, everything works fine after reboot except. When I use nano -w /boot/grub/grub.conf I get /boot/grub/grub.conf: No such file or directoryIs there something i have to do after installing a new kernel in Gentoo Linux.I can't access my /boot all that appears there is a symlink to /boot How can i see my kernels located in /boot.
View 3 Replies
View Related
Sep 19, 2010
Im a new linux user and so far im loving it, problem is i just tried installing Ubuntu 10.04 netbook remix onto my Compaq mini 311 (via usb) and at first i couldnt even install from the flash stick...finally managed to by formatting the flash with an HP tool and then creating the bootable Live OS with "Linux Live USB creator 2.6."
I selected to use the whole Hard disk to install (the hard disk was empty anyway as i recently formated the drive which had windows 7 on it)
The the installation completed successfully but the problem is that after rebooting the OS wouldnt boot, leaving me with a flashing cursor or _ on the top left of the screen...
I have tried everything i could think of, using different Usb creators, formatting the hard drive before re-installing but for some reason im still left with the same blinking cursor after every install.
I have just installed the regular version of ubuntu 9.04 which works perfectly after installing but id much rather use the netbook version of 10.04
(I assume the issue has something to do with the bootloader but im completely new to the topic so cant really troubleshoot)
View 4 Replies
View Related
Jan 2, 2010
My girlfriend has a dual boot netbook I set up for her with Vista + 9.10. Her internet service went down yesterday temporarily and she was messing around with the computer to get back online and somehow booted into the Windows Rescue Partition and began the Windows Restore process, then turned the computer off during the middle of the restore process.It's her only computer and she lives 1800 miles away. And since it's a netbook there's no optical drive.
When she boots up now, the netbook goes straight into Grub Rescue mode. I got her to try most of the commands for Grub Rescue, but most of them come back as "Unknown Command". The "LS" command works though, and she was able to get a list of partitions displayed.Does anyone know of some commands she could use try to boot back into 9.10 (assuming it's still there)? Or even boot into Windows? Specifically, is there a simple command that could be combined with "LS" to specify a partition and try to boot into it?
View 9 Replies
View Related
Apr 5, 2011
I am attempting to get beyond my grub> as it has hung up there after trying to update my Samsung netbook from 10.04 to 10.10. I have found some answers but a basic question is where do I load grub from a livecd to the mount point where I have already installed my Ubuntu I have attached a screen shot of my partitions on my 160 gb hd and hope it can be opened?
View 9 Replies
View Related
Oct 18, 2010
I had Ubuntu 10.04 LTS and used the Upgrader to go to 10.10. After it went through downloading and installing Ubuntu, it wanted me to restart. Upon restarting and picking Ubuntu in the Boot Options, it says something is missing in NTFS called wiulibsomething then it goes to this cmd type screen with grub>. I have used Linux for about three weeks now, and I think one of the threads after me has already talked about this and I'm really not sure how any of this works. I don't want to sound dumb, but yeah, I've used Windows all my life and I'm clueless how to fix this. EDIT: Error is Minimal BASH-like line editing is supported. For the first TAB lists possible command completions. Anywhere else TAB possible device or file completions.
View 9 Replies
View Related
