when i install ubuntu on vista from iso file directly from hard disk it install the copy completely but after booting up a white sreen comes up with vertical coloured linning.
View 3 RepliesI have Toshiba Satelite E105 laptop with installed home vista and now i want to install Fedora 10.My problem is that when i was trying to partion my 290gb hard disk(C drive)after going to storage managament and going to "Shrink Volume "option then my laptop can maximum provide 970 mb space to shrink whereas i need minimum 20 gb space for linux.What should i do?I have 4gb RAM.Please tell me how to install fedora10
View 1 Replies View Relatedis there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies View RelatedI have a computer that was given to me and is no longer booting up properly. It's an Acer with VISTA installed. I would like to format the hard drive and start over with Linux. I don't have the original windows vista disk, I don't believe the computer even came with one, and no back up disks. Apparently this is the only way to format VISTA. When I am in the command prompt here is what happens.
C:> format c:
The type of the file system is NTFS.
Enter correct volume lable for drive C:
I don't know the correct label.
Searching on the forums I found this.
format c:/fs:NTFS/p:/
That doesn't work. I get this:
"Invalid parameter - /p:"
i've fedora 15 & windows vista installed on hard disk partitions.i can access windows files from fedora but how to view fedora files when i'm working on windows???
View 11 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI have been running Ubuntu as my sole OS for about a month now, and aside from Computer Janitor, I have found no drive/fs cleaning tools, or defragging tools. I know this isn't Windoze, but surely there must be a way of maintaining your hard disk. I mean installs/uninstalls must leave detritus, and file moving must cause SOME fragmentation. Are there any apps, systems or methods in place that provide this functionality?
View 3 Replies View Relatederror: unknown filesystem grub rescue>
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
I plan to reformat & reinstall my linux (centos).Before doing this, I got to backup my files into my USB external hard disk from Seagate (FreeAgent). The problem I faced is that I could not copy file into the hard disk even I was in root user. It prompted me that it is only read-only. I just wonder why.I have tested with my thumb drive. It worked. May I know why I could not copy file to the USB FreeAgent hard disk. Due to file system?
View 3 Replies View RelatedMy old laptop has no cdrom, no usb,no floppy unit...is it possible to install puppy linux?
View 3 Replies View RelatedHow to install Red Hat Enterprize Linux 5.0 on Hard disk which have xp already install
View 7 Replies View RelatedIf you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
How can i install redhat9 on sata hard disk.
it always ask for drivers & i didn't find it.
I am trying to install dynebolic multimedia studio on my hard disk. As per the instructions i copied the /dyne directory into the /(root) of my partition filesystem and booted from dyne cd but it is not working.they said cd will be automatically ejected during first phase of booting but it didnt It continued to read from cd.What should i do next.
View 1 Replies View RelatedI have RedHat Linux running on my VBox guest on my Windows host. I need to install RedHat Linux on the attached external usb hard disk ,connected to my guest machine.how can install redhat on this external usb hard disk?
View 12 Replies View RelatedI need to install windows xp and linux in separate hard disk on my computer.Is it possible?
View 2 Replies View RelatedThis question is somewhat open ended, so I'll describe the specific issue, what I want to accomplish in general, and what I tried to do. It'd be a little long, but hopefully not too daunting.For quite a while my approach to multi-OS boots has been to install each OS to a separate disk. When I want to boot a specific OS I change the boot drive in the BIOS. I find this convenient for several reasons, but mostly because I don't get boot manager conflicts. If I remove a disk or change the OS on it, this doesn't affect the booting of other OS's.
Note that when I say multi-OS, this meant until now multiple versions of Windows. I've occasionally tried some linux distros on VirtualBox, but now I want to do a full install, and see if I can use it as a main OS. (What prompted this was the recent release of Wine 1.2 and the fact that my new job doesn't involve any Direct3D or DDI work. I've always been partial to the open source movement, but I'm also fine with Windows and never before felt I could make the move without losing key abilities). My plan was (still is, if I can get it to work) to use Linux for everyday e-mail, web browsing and such, play Windows games over Wine, and install Windows 7 in VirtualBox for Windows development.I currently have two disks, one with my main Vista x64 installation, and the other with a Vista x86 installation which I used for my previous job and I no longer need. This is the disk I want to use for the Linux installation. It has a lot of partitions but quite a bit of free space (since I copied a 80GB disk and 250GB disk into a 500GB disk and haven't taken advantage of the extra space).My first choice of distro was Linux Mint, since it's known to be friendly to new users, and I like the software installer on it. I installed Linux Mint in the past in VirtualBox, and the latest version also installed fine, and I found installation instructions explaining how to provide my own partitions, but the installation failed during the "configuring hardware" stage. If you're interested, more details are available in this thread on the Linux Mint forums. I didn't get any reply to that thread.
I thought then that I'd try openSUSE 11.3. The live CD looked usable enough, but when I tried to install I couldn't tell how to make sure that I don't get a boot manager which will try to give me access to the Windows versions on the disks. I don't want this, and what I'm really afraid of is that an install will screw the booting of Vista x64 on the other disk (which, granted, I can disconnect for the install, but I'd rather not). At that point I decided to post a question here.So hopefully you understand what I want to achieve. I don't much care which Linux distro I install, but I'd rather have one which gives me as much usability out of the box (or easily installable) as possible.
Can i install old versions of redhat linux (like versions 3,4,5) for SATA type hard disk. I heard that SATA disk will allownew versions of redhat linux only.
View 4 Replies View Relatedmount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedI wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.
Is there a way to re-install grub on the master boot record of a hard disk using a live cd?If so will i have to configure it?I'm trying to install a linux distro on my ao751h(with poulsbo ) but i after installing it i can't boot.I get an error 15 or a flashing underscore.I have already tried ubuntu,debian,mint and slackware(LILO isn't compatible with poulsbo).Also,does anybody experience problems with the ubuntu 10.04 and 10.10 installers or is it only me?when i choose the language and keyboard settings the installation stop as it is and i get a crash report.
View 4 Replies View Relatedafter installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View Relatedi want to know why do we need to patch files based upon diff when we can directly overwrite the old file with the new file.
View 4 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI'm using ubuntu 8.10 which is already installed. Recently I have downloaded ISO file of ubuntu 10.04. Is there any way to install that ISO file i've downloaded without writing the ISO file in a CD?
View 4 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
I'm trying to help out a Windows Vista user by rescuing their data from a failing hard disk. When their laptop stopped booting, I immediately pulled the disk to get as much as I could off of it using another Windows box, but the process took days and ultimately choked on multiple bad sectors and stopped responding. I then hooked it up to my Ubuntu box via a USB disk dock and ran a ddrescue on the Windows partition. The operation took a week, then seemed to get stuck for another week on the "splitting failed blocks" phase. So I have an dd image and a log to go back to, but when I resume that process it still seems to use the disk and I don't see much progress.
I then tried a plain `dd` on the disk with `conv=noerror,sync` options, and that has been running for a few days now, but with input/ouput error messages every few seconds and seemingly no records going in or out. I think that's a bad sign.What's the best, and fastest, way to get the most data off the disk as possible and into an image file, and then perform any necessary operations on the image file so that the disk is no longer needed (since it seems to be just about dead)? Er, just realized I'd put "Windows 7" in the post title, but this is a Vista partition, and I can't change the title. They're pretty similar, with one OS being much less useful than the other, but I thought I'd better acknowledge my mistake.
I have access to backup server via rsync protocol (only rsync, nothing else). Now, I want to fetch file from there (which is .tar.gz) and pass it directly to tar command, without saving the archive in local filesystem. To visualize, with ssh access I could:
ssh remote_host cat backup.file.tar.gz | tar xzf - And I will get uncompressed backup locally, without actually storing .tar.gz on local machine. Is it possible to achieve when using rsync?
Is there some way to do live stream video directly from torrent? Are there linux tools like torrent cleint which can do this?
View 3 Replies View Related