Another basic question, as I am still new to Linux.I have a new machine loaded with RHEL 5.2 and when I try to connect into it using EXCEED XDMCP-Broadcast mode from my PC, it never comes up as a selection in the select-list. What rpms, procs, etc. am I missing on my RHEL 5.2 system???
View 10 RepliesWe've used Exceed and Exceed3D X server software to run OpenGL 3D simulation software for a long time, and it has always worked great. Now, a new box that runs OpenSuSE 11.2 (kernel 2.6) shows terrible display performance with Exceed.
Exceed 10 on Windows XP works great for OpenSuSE 10 and earlier, but the same display platform grinds to a halt for OpenSuSE 11.2. We tried upgrading to the latest version of Exceed, version 14, but still no joy.
As an alternative, VNC works okay for desktop stuff, but just doesn't run the 3D apps like a dedicated server does (or should).
The reps at OpenText, the makers of Exceed, scratched their heads over this one.
I have a server which I need to connect to and run a graphical program on. I know that you can do this with Open Text Exceed, but it's been years since I've done this and the last time I did it was on version 9. Unfortunately I only have a license for version 14 now and have no idea how to do this. how I can use Exceed to connect to my linux server?
View 1 Replies View Relatedi have fluxbox and i need to know how to copy things in xterm and paste them outside of xterm.
View 2 Replies View Relatedhow to use the eXceed as an X-windows alone without connecting to any host or network?
View 1 Replies View RelatedStart xpdf or gv. Click an xterm to be active and slide it over xpdf/gv. Vertical lines from xpdf/gv under the xterm stick to the xterm window above and make it unreadable.
The problem does NOT show with KDE default settings with display effects on but does show in fvwm, xfce etc, and in KDE without effects.
On a system with a Sandy Bridge integrated graphics (i5-2400) the problem went away by downgrading to xf86-video-intel-2.13.0. But it was not enough for another system with 945G which needed downgrading to xf86-video-intel-2.12.0.
I am looking to setup some computers as thinclients to connect to my MS Terminal Servers. We have a homebrew application that configures RDP sessions. A user logs into a webpage that dynamically generates a "launch.rdp" file. This file is generated to balance the load between servers.What I'd like to do is configure an image to boot up into Mozilla. When the user goes to the webpage, I'd like the launch.rdp file to open up in a terminal server session.I've tried with rdesktop and tsclient, but unfortunately neither would work with a "rdp" file.
View 14 Replies View RelatedI have two partitions Windows XP (which was already installed before Ubuntu) and Ubuntu 9.1 (which I installed later).Now the XP doesn't boot anymore (sorry but I need it sometimes), the Windows screen with the progress bar appears and then it reboots after a couple of secs.
I can access to the XP partition from Ububtu.Of course I don't want to damage Ubuntu during the XP recovery action.
In my rather unsuccessful attempt to get gvim working properly (see [url] )
I am now considering using some other editor in windows which will allow editing of ssh shell script *on the linux server* directly.
At the moment I'm using winscp's editor which is no better than notepad really (no syntax colouring / code folding / colour settings)
I built this computer recently
AMD IIX6 1090T cpu
ASUS M4A89GTD PRO USB3 MB
2- 4GIG DDR3
1- 2GIG DDR3
OS DEBIAN SQUEEZE
I only recently started using and noticed thes errors.
I checked my system bios, ECC was not enabled because, when I setup mobo I selected system defaults instead of doing them manually. So I enabled them.
The message has not gone away.
I looked up the message and it shows in bug list.
[url]
[url]
1. Had I have enabled Ecc before installing Debian, would I be getting this message.
2.How do I apply patch.
3. I only have 3mem sticks instead of 4' should I take out the 3rd or add another?
I presently have Fedora 12 running on a Dell Optiplex with a Pentium 4 CPU. I want to buy a new computer, probably from Dell, I don't completely understand the options I have available for which Fedora 13 will run.I more or less understand what 64 bit means since I also have an HP with an AMD 64 bit processor. But are there other options which will allow me to exceed the i386 memory limit? How about dual processors?
I used to understand CPU architecture pretty well, but i've lost track of more recent developments. Can anyone recommend a primer of CPU types, including assoicated memory limits? Similarly, I would like to be sure that Fedora 13 will run on whatever machine I decide to get. So a list of available processors, which are equivalent to which, and which Fedora 13 has been tested on,
I've checked gdmsetup and there isn't anything that I can see that keeps my general users from getting in remotely. I can get the Gnome to login as root but not as a user. SSH from PuTTY works fine for all users. The error I get actually says that the username or password is incorrect - checked using SSH and it is fine.
View 1 Replies View RelatedI've just installed xterm, ant trying to run it from my windows machine using ssh. I have X11Forwarding yes on /etc/ssh/sshd_config when I use, MobaXterm, np, I can use xterm after I log ssh -X xxx
but when I use Cygwin, and do ssh -X xxx, and then xterm, I have: xterm XT error : Can't open display: xterm: Display is not set
I have a xterm which can have 256 colors. How can I configure the prompt colors and ls output colors to take advantages of the 256 color values?
View 4 Replies View RelatedI am beginner for linux. I wanted to ask something about xterm.
1. what is xterm?
2. what is the use of xterm and how can we use it.
I had this error when installing and running a vncserver before, which I have now removed. However, the xterm's seem to remain in the system and are regenerating themselves. Should the pid IDs stay the same each time I run this?
Code:
[root nxserver]# pidof xterm
15034 15033 15032 15031 15030 15029 15028 15027 15026
[root nxserver]# pidof xterm
15044 15043 15042 15041 15040 15039 15038 15037 15036
[Code].....
Is there a command to find out on what xterm I am (gnome, kdm, etc)? I currently have Ubuntu 10.04 LTS.
View 2 Replies View RelatedIs there any config files for xterm for default settings? For example, on my system, xterm start with black text on white background, and I want it the other way around. I can do it by starting it with:
xterm -bg black -fg white.
I want to set in a config file that if I run it without arguments, it will start with these options.
Something weird sometimes happens on my Debian system. Typically at the prompt line I can use combo like alt-d to delete a word, alt-f to go to the next word, etc. But quite regularly something happens in my xterm that makes alt-d and alt-f not work anymore: suddenly they print 'ä' (alt-d) and 'æ' (alt-f).
Note that this happens in a terminal that was acting like I wanted to at first. But then somehow must send a code or something that changes the behavior of the terminal. It happens in xterm because that's where I always work. If I go to a console by doing ctrl+alt+f1 then by default alt-d does what I want (delete word) and so does alt-f. Maybe that I could screw that one too by doing some bad manipulation: I just don't know because I don't work in text mode.
Also note that if I spawn an xterm from the "broken" xterm, then the new xterm work as I expect. What is going on? What am I turning on that was off previously? My .Xresources says that and, once again, when I open an xterm it behaves as I expect it, it's only later on that "something" makes that it goes back to broken "I-print-characters-with-diacritics-and-other-nonsense" mode:
$ more .Xresources
XTerm.vt100.eightBitInput: false
XTerm*eightBitInput: False
i am trying to run xterm command in linux.it opens one pop-up window and closes when we close that terminal.I want to store it like a file.
$ xterm -l -lf "test"
but test is not storing any where? how to configure this?
I've search around and looked at the man page but can't seem to figure this out.. using fluxbox one can click an application in the menu and it opens without a supporting terminal. However, if I open xpdf in the terminal, xpdf launches and the terminal waits for it to exit... my question is, what is the command to hide the terminal and just launch the application?
View 5 Replies View RelatedIs there a way to add a keyboard shortcut for a terminal command in OSX. Basically most of the times i open the terminal app in MAC in order to ssh into a certain server foo. What I want to do is add a keyboard shortcut (say ^k) so that on a terminal when I do that, it runs "ssh foo" in the terminal.
View 4 Replies View RelatedWhich fonts dows xterm support?Is there any command to know the list of those fonts?
View 1 Replies View RelatedError opening terminal : xterm
While start nano editor in terminal
I'm using Xterm. While running a prog/command if I scroll up and reading something on the screen, the xterm view resets to bottom if there is some output from the running command.
I tried enabling/disabling jump scroll, asynchronous scroll, scroll to bottom on tty output options of Xterm with no avail. In one way or the other way, the screen is scrolling or resetting to bottom if there is some output to screen.
I want to stop this behavior and the scroll should work as if it is in Konsole. The new output to screen should simply add at the bottom and the current viewing point should remain unscrolled. pls let me know if there is any working solution for this xterm problem.
I was wondering how to change the xterm font size and may be the font itself. Also we go to tty1 when we press Ctrl+Alt+f1 , f3 and so on. Is there any way I can change that too and maybe change the colour of the font and the size of it. I did change the resolution once in ubuntu with startup manager. I'm using fedora 14.
View 13 Replies View RelatedI use xterm with a particular font size and type. But every time I start xterm I have to give them in arguments
Code:
xterm -fa terminus -fs 12
Is there some configuration file where I can out the above parameters and xterm will pick them itself. But I don't want these properties to be set globally. Every user should be able to set it for himself. I have searched all the hidden folders and rc files in my home folder, but didn't find anyone related to xterm. What should I do? Similarly every time I start screen, I have to issue
Quote:
:caption always
:caption string %w
Can I make it automatic by editing some configuration file? Is there any way through which every xterm I start will have a screen session already open in it?
/usr/bin/xterm Xt error: Can't open display: %s
I tried to connect to remote server ,which is installed Centos 5.4 x86, through Xmanager on windows 7, and got this error.
Quote:
/usr/bin/xterm Xt error: Can't open display: %s
At the remote server, I turned on firewall and after this I got the above-mentioned error message.
I do this accrding to instruction on remote server.
Quote:
2. Firewall (TCP/UDP Ports) Configuration
Open UDP port 177 from the PC to the remote host direction.
Open incoming TCP ports 6000~6010 from the remote host to your PC.
After adding these ports "/etc/sysconfig/iptable" as the enoder mentioned, /etc/init.d/iptables restart
3. Reboot the remote host and start Xmanager <- I could not restart remote server.
I'm having difficulty setting custom ls colors in xterm. If I understand it right one can edit the system-wide file located in /etc/DIR_COLORS to modify every terminal or customize xterm; I chose xterm mostly because the other terminals I never use. Here is my .bash_profile and .bashrc respectively:
if [ -f ~/.bashrc ]; then
source ~/.bashrc
fi
if [ -f /etc/bashrc ]; then
source /etc/bashrc
fi
alias ls='ls --color -F'
PS1='[e[1;32m][u@h:w]$[e[0m] '
When I use the login shell, the colors are different than xterm in that they are not as bright; furthermore, I marked out bold fonts in .Xresources:
!xterm colors
xterm*foreground: #d3d3d3
xterm*background: #000000
xterm*boldColors: false
xterm*cursorBlink: true
xterm*cursorColor: white
xterm*loginShell: false
xterm*faceName: Liberation Mono
xterm*faceSize: 10
So, there must be a file around somewhere that is changing the colors between the interactive and login shells. Also,
man xterm:
color6 (class Color6)
color7 (class Color7)
These specify the colors for the ISO-6429 extension. The defaults are, respectively, black, red3, green3, yellow3, a customizable dark blue, magenta3, cyan3 and gray90. The default shades of color are chosen to allow the colors 8-15 to be used as brighter versions. How does that get anyone anywhere with setting the color? It doesn't say what color (class) is assigned to which file specifically, thus adhering to the distribution-wide color codes. Perhaps I am making this more difficult than it should be.
What should I put in my .twmrc, so that an xterm window is brought to front (raised) when I click anywhere in the window. Currently, I have to click on the title bar to bring it to front. Presently, I don't have any .twmrc in my Home folder.
View 1 Replies View Related