General :: Distro For HP ML330 G3 - CSB-6 Controller

Apr 11, 2010

I am trying to get back into Linux after not touching it for several years. I have an HP ML330 G3 with a CSB-6 controller and no diskette drive to experiment with. I have been unsuccessful trying to install Mandriva 2010 or Fedora 12. A little research reveals that the problem is with the CSB-6 controller, but I've been unable to find a way to correct this with these particular versions. recommend a distro I can download that will work with this hardware without recompiling?

View 3 Replies


ADVERTISEMENT

Fedora Hardware :: Install F14 On HP ProLiant ML330 Server But It Doesn't

Mar 9, 2011

I've been trying to install Fedora14 on HP ProLiant ML330 server but it doesn't recognize
HP Smart Array P410/512 BBWC controller, and thus won't see HDD's(Raid 1).

HP site lists only theese drivers:
Microsoft Windows Server 2003
Microsoft Windows Server 2003 64-Bit Edition
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 Itanium

[Code]...

View 1 Replies View Related

Ubuntu Servers :: 10.04 Server And Compaq Proliant ML330 G2 W/ATA RAID?

Jun 7, 2010

I'm having a great deal of time getting Lucid Server up and running on my Compaq Proliant ML330 G2. I've put a thread up in installing and upgrading, but people there don't seem to have any ideas about my problem. Since I figured there would be a higher concentration of server users here,

I've got a Proliant ML330 G2, 2 1.4 GHz PIV's
A dvd and CD drive on IDE1 (I'll explain why in a moment
A 65 gb hdd on IDE2
and four 40gb hdd's on hardware ide raid.

I've tried everything, but I can't get the sucker to boot. Installing to the raid array doesn't work. Some array setups won't partition, and others aren't even recognized as arrays. I've tried disabling the raid array and installing to the IDE hdd (my original intention) but I just get bad system disk errors. It would be exceptionally helpful if anyone has one of these boxes, or has worked on one, but I'm willing to take advice from any direction at this point.

View 3 Replies View Related

General :: Distro - Nominate A Disastrous Distro From Past Or Present

Jan 9, 2010

nominate a disastrous distro from past or present that was simply AWFUL and what exactly was so bad about it?

View 14 Replies View Related

CentOS 5 :: Eucalyptus Node Controller And Cloud Controller Apps Won't Bind To IP

Jun 18, 2010

I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:

Cloud Controller:

[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774

[code]...

View 2 Replies View Related

Ubuntu :: Proper Analog Controller With Joypad/controller Mupen64plus?

Sep 15, 2010

Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.

I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?

View 4 Replies View Related

Fedora Networking :: Windows Sever 2k3 Domain Controller / Use Machine With Samba As Secondary Domain Controller?

Apr 28, 2009

At the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.

Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.

So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.

View 1 Replies View Related

General :: Best LXDE Based Distro/distro That Supports LXDE?

Dec 15, 2010

Lubuntu is nice - but it seems the LXDE version is not as up to date as Fedora LXDE Spin or even Debian squeeze with LXDE installed. I do like Chromium on Lubuntu though... its faster and a nice touch. I am looking for a lightweight 64-bit distribution for my main laptop (it is by no means "old" or "low spec" but I like that Lubuntu starts up in like 2 secs).

LXDE version seems not to be recent (esp in 10.04 version which seems to work more stably for me - with Nvidia drivers etc)64 bit install is currently a pain - requires first install of minimal CD or alternate CD both of which required wired Ethernet, then install of lubuntu from PPA. Native 64-bit support would be nice. Linux Mint LXDE, for example, is also only 32-bit.

View 4 Replies View Related

Networking :: Why Doesn't Distro 9.0 Setup Work For 13.1 Distro?

Sep 6, 2010

I have a linux box set up as a multi-purpose server for my home with three Windows client PC's. The linux box is based on a slightly modified Slackware 9.0 distribution using Linux 2.4.20 and an unfortinately old, slow AMD processor with a miserable 512Kb RAM. The linux box serves the CIFS file system to the Windows boxes, runs the SQUID HTTP proxy, the Apache web server, a print server, does masquerading, mail serving and a very effective firewall using iptables.

This system, although slow, has run perfectly for several years.Let me say that again - This system works perfectly.I had decided that now is the time to upgrade the hardware, so I bought a Gigabyte LGA775 motherboard which has two 1Gb network interfaces on it, an ASUS 256Mb PCI-E display card, 2Gb of DDR3 RAM, an Intel Core2-Quad processor and a bunch of 500Gb SATA drives to set up a RAID5 array (but I intend that the system boot off one of several 40Gb PATA drives I have).I set up the processor, motherboard, display card, RAM, a SATA DVD Drive and a 40Gb PATA hard disk in a "breadboard" layout and installed distro 13.1, being careful to set up the static IP for the local network, dhcpcd to get an IP address from the cable modem (my internet connection) and to enable ip_forward in the network configuration.

Then I installed a script invoked by /etc/rc.d/rc.local which installed all the SAME iptables rules as my old Linux box. There was one minor glitch when I had to change 8 occurrences of "-d ! $LOCAL_NET to" "! --destination $LOCAL_NET" but that was no problem. I also set up /etc/resolv.conf, /etc/hosts , the BIND server files etc. etc. exactly as in the old box.

I am able to ping mirror.aarnet.edu.au (this is at the heart of Australia's internet hub network - if it's down the whole bloody thing is down) and have the system find the correct IP from the designated nameservers and contact that server with a return trip time of 35ms. I am able to run a telnet session from one of the Windows boxes and edit files on the Linux server. So both network interfaces work and I've got them the right way around.I am able to run FTP on one of the Windows boxes and connect through to mirror.aarnet.edu.au, although it seems to hang when I try a DIR (but then so does the old linux system).

View 83 Replies View Related

General :: Accessing Memory Controller Of Ram?

Mar 14, 2011

iam using redhat linux in my pc, as part of my study i need to read memory controller(RAM) configuration through user space APIs.

iam trying for the same in internet but i didnt find anything interesting yet.

i need to perform RAM read/write test

View 3 Replies View Related

General :: Develop Embedded In ARM9 Controller?

Nov 14, 2010

But started to develop Embedded linux in ARM9 controller.

View 12 Replies View Related

General :: Remove/Disable USB Host Controller Driver?

Jul 25, 2010

Am a quite naive user of linux. I would like to know whether there is a way in which I can remove/disable the USB Host controller driver from the kernel, without kernel compilation..Am using a custom system which has linux in it (Fedora) If not, how should i go about recompiling the kernel to have this module disabled.

View 1 Replies View Related

General :: Installing A BCM4303 WLAN Controller On Ubuntu 10.04

Jun 19, 2010

I got an older computer from a friend who had Windows XP as an operating system. I installed Ubuntu 10.04 on it, but cannot get the wireless controller to work. It is a BCM4303. Yes, it is an old one. So far I have spend virtually nothing on the computer. Ubuntu installed without a hitch as far as I can tell with the exception of this WIFI problem. I have searched the forums but got no matches. Perhaps I am using the wrong key words. Can anyone offer a solution or point me in the general direction.

View 4 Replies View Related

General :: Can Tools Do Work Of High-end (expensive) SATA Controller?

Jan 28, 2010

I'm not all that familiar with what it is that the expensive SATA cards do, other than providing on-board cache and many ports, but all things considered what can't a CPU and lot's-o-RAM do that an expensive SATA card can?This assumes, of course, that you weren't planning on using the CPU to run other applications (i.e. a SAN type setup).

View 11 Replies View Related

General :: Install Slackware On A Drive Connected To An Adaptec Ide Controller?

Jun 6, 2010

I am trying to install slackware on a drive connected to an adaptec ide controller. on bootup controller is found and installed. but how do i find this drive on setup program.

View 1 Replies View Related

General :: Better Driver For The Intel 82852/82855 GM Graphics Controller

Feb 4, 2011

I am running Ubuntu 10.10 on my old Acer Travelmate 661 LCi. Device manager tells me: info.linux.driver i915. Is there a better driver, and if yes, where can I get it and how can I install it.

View 1 Replies View Related

General :: 82845G Graphics Controller - Screen Goes Black After Logging In

Jan 14, 2010

I have installed the latest debian on a dell optiplex gx260 which has a 82845G chipset and there are some strange problems.The system is configured with autologon as a standard user. Sometimes, after logging on, the screen goes black but if I connect to it with vnc, I get a working desktop. Yesterday I booted it without a display attached to it and now I cannot set it to the right screen resolution anymore (1440 x 900) which was working fine before.

I have googled and searh the forum but cannot find the right information. According to Intel, the latest driver should be in the distro but I cannot find any details about that (version/date). grep Driver /etc/X11/xorg.conf returns

[Code]....

View 15 Replies View Related

General :: Megaraid Controller On Dell 2850 (kernel Panic)

Jul 2, 2010

megaraid controller and Dell2850, all that I can see on thi screenshot:

[URL]

All drives successfuly passed verifing from LSI controllers (Ctrl+A at startup), also I tried to boot from rescue llive cd and mount all the morrored drives and check it by fsck - ok.

View 5 Replies View Related

General :: USB Host Controller Device Driver Needed For Slax Live CD

Jan 1, 2011

For years I have used a Slax live CD on a laptop to clone internal HDDs to USB HDDs. I recently purchased a Sony VPCF136FM laptop with Intel Core i7 CPU. It apparently has USB 3.0 ports. The problem is the USB ports are dead with Slax. There is a USB devise driver available for Windows 7 from Sony but nothing for Linux operating systems. Can this driver be ported to Linux? It is an exacutable (XXX.exe). The chip for the USB Host is from Renesas Electronics (no help there, either). Where can I find a device driver to use with Slax and how would I install it?

View 3 Replies View Related

General :: System Install CD Doesn't Recognize Disk Controller / Customize And Add Such Driver In It?

Nov 5, 2010

Sometimes the linux install CD does not recognize the disk controller
I am asking is there a way to customize the disk and add such driver
if yes :

what files from the driver to put and where to do that?

View 1 Replies View Related

General :: Configuring Redhat As Domain Controller And Adding Windows Workstations As Clients

Feb 28, 2011

i need to configure Redhat Linux as Domain Controller in my organisation, whee all of my clients PC's will be Windows XP or Windows 7 ( where i can login through Domain users ). what exactly i need to configure in Redhat Linux, i heard Configuring Samba as PDC is quite enough ? is that right ? then what is Open LDAP ? should i need to Configure Open LDAP also ?

View 2 Replies View Related

General :: Dell Inpeirion 1545 Hard Drives Are Attached To A SATA Controller?

Jan 8, 2010

I am using Dell Inspirion 1545 core 2 duo T6600, 3 gb ram,320 gb sata hddand in my bios i got 4 option (1) disable which disable sata and hdd is not detected (2) ATA where in my M$ is working(3) AHCI which mode will work. also i am using vm-ware to installed redhat linux 5.my hdd did not detected. do u need any information tell me i will post it on the same any command out put or log by which we can solve this problem.

View 1 Replies View Related

General :: How To Add A Distro

Jul 14, 2010

I have Windows and Pclinuxos on my machine. I get the option of selecting either when I boot up. I now want to add Mandriva One, giving me three choices. I've created a new partition for Mandriva and the table now looks like this:

[Code]...

I have tried installing a third OS (Windows + 2 distros) in the past but still only got two choices - Windows and the last installed distro. The first distro was still in the machine but not showing on the boot up screen. I've tried to read up about chainloading but don't really understand it.

View 14 Replies View Related

General :: How To Know All App Of A Distro

Feb 28, 2011

How can I know all the tools and app that comes with a distro, for example Debian 6 ?I can see that linux distros have a lot a small , medium apps (natives like cat, join, paste, etc; and 3rd party like iwconfig, etc=)So , how can I know what i have with a linux distro ?

View 4 Replies View Related

General :: Need New Distro Installable From USB?

Oct 28, 2010

I would like a new linux distro. I've been using ubuntu for like 2 years or more and I'm just done with it. Some things that I want out of the new distro are:
Since I like learning, I want the distro to NOT be so user-friendly. I want a challenge. Just anything new to learn would be amazing. I need wireless support out of the box though, since that's the only source of internet I have around here.. I need it to be installable from usb, since i'm using a netbook without a cd drive.

View 12 Replies View Related

General :: Can't Decide On A New Distro?

May 9, 2010

I've had Ubuntu (8.10) on my netbook in the past and I really liked it. I'm currently running Fedora and feeling like I should "change it up" again. I've played around with Ubuntu 10.04 Lucid a little, and so far I'm very impressed. I've always wanted to try Arch, but I'm worried I won't have the driver support I need for all the non-standard hardware in a netbook.

Does anybody have a suggestion for a new distro to try? I'm preferably looking for something feature-rich over light-weight, and something that I can have up and running with a minimum of configuration (at least partially working).

View 3 Replies View Related

General :: Which Distro To Run On A Slow SSD?

Aug 7, 2010

I bought an Eee PC 1000, the Linux SSD model, a couple years ago. I ended up putting Easy Peasy (then called Ubuntu Eee) onto it, only to be dissatisfied with the speed. Then I put Windows XP on it, and with a LOT of tweaking it ran sort of okay. Now I pulled it out and dusted it off but I want it to run Linux.

It has the Intel Atom 1.6ghz processor and 2gb of RAM (I upgraded it) so there's no lack of power there, but the SSD is extremely slow; it has a small write buffer, but when you do anything slightly significant you can feel the system stutter every second or two as the SSD halts everything while it dumps its full cache to disk. I'm talking serious stutters, and the cache isn't very big; to get Firefox to not stutter I had to move all caching into RAM and disable history (even just writing the history log to disk froze the system with every webpage).

Anyway, I hope I've given you a decent idea of just how slow this SSD is. With that said, is there a Linux distro that is optimized for an extremely slow hard drive but decent powered system? I'm not looking for something underpowered because the processor and RAM are plenty powerful, I just want something that perhaps is optimized for not writing to disk often.

View 4 Replies View Related

General :: KDE Distro With ATI Support ?

Feb 6, 2010

I didn't know where to post this, but I hope I get an answer. I'm not new to Linux, but I'm not a super user either. I've been distro hopping for years, until I found Mandriva 2010. I love it, but whenever I install the ATI drivers I get a Kwin has crashed error every time I start up. So I tried openSuse 11.2, it's a pleasant distro implements KDE well, but I got the same results with openSuse.

My question to you guys is, what current KDE distro has the best support for ATI cards? Or is there a way to get either KDE or openSuse working correctly? I've tried everything I found in other forums to no avail.

My specs:
XFX HD Radeon 4770
AMD Athlon II X4 625
2 GB of Ram

View 6 Replies View Related

General :: Different Distro On A Server?

Apr 6, 2010

My question is, is it okay (for example) if i have an Ubuntu desktop and i will connect it to a Red Hat PC Server. Will it do? or should i have to have a same distro for both Desktop and Server.

View 3 Replies View Related

General :: Which Distro Is Best Coded

Apr 9, 2010

I have used Linux since 2007. I have find chance to try Ubuntu, Debian, Suse, Arch.

Question is Which distro is best coded?

I believeall distros can have same functions and Many distros is good for me. I dont have any problem with any of above distos. So which is best according to their base code system

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved