General :: Cracked Laptop Screen / Can't See Most Of The Screen?
Dec 3, 2010
I recently installed Debian Linux (Lenny, but I used a backpost kernel) A couple months ago, I dropped my laptop and it has GIANT cracks in it so that it is nearly impossible to see most of the screen. I've managed to work around it by hooking it up to my TV screen, but now that I've installed debian, and am trying to use bash as much as possible, I wonder if it would be possible to tell debian not to use any of the unusable screen. Is there a way to set this up? It's an Acer Aspire One 150 ZG5
View 5 Replies
ADVERTISEMENT
Feb 25, 2011
I have a laptop with a cracked screen. the crack is not very serious, about an inch and a half on the right. I can still use my laptop but it is hard to see information in the cracked area.
My question is how can i set up ubuntu not to use that portion of the screen, sort of tricking it into thinking that the display is essentially 1.5 inches shorter on the right than it really is.Perhaps setup x11 differently?
View 7 Replies
View Related
Jun 13, 2011
I was install my server (IBM x360) debian squeeze with netinst-CD but screen's cracked like static. (graphical or none both)
View 1 Replies
View Related
Jul 18, 2010
I've had Windows XP installed on a Dell Inspiron 6000 laptop with 1 gig of ram and 70 gig hard disk. Today I decided to install Ubuntu 10.04 desktop edition to ext3 partitions I made on the laptop's hard disk. The Ubuntu installation went fine, and Ubuntu was up and runnning. Then for fun, I checked the available WiFi networks in this apartment building. Six were secure but one WiFi was open, so I clicked it out of curiosity. Within seconds, my laptop's 15-inch screen went super-dark, nearly jet black.I couldn't read anything on the screen. Pictures and words were still on the screen, but just way too dark to read or to see with any clarity at all. I don't have a WiFi card in the laptop.Instead I use Verizon's usb727 air card on Verizon EVDO Mobile Broadband (3G)
I don't know if the free Wifi network hosed me in some way with a nasty trick (I don't have a WiFi card in the laptop--just the usb727 dongle which is an EVDO aircard), or if it was just coincidental that the screen went super dark seconds after clicking the open Wifi network in Ubuntu's network manager applet.When I reboot, I don't see anything anymore, not the POST, not Windows XP booting up, or Ubuntu booting up. The only way I see anything now is to connect the laptop to an external monitor using the laptop's blue video connector. And even then, I still can't see the boot-up POST process, or the BIOS screen.I can only see Ubuntu or Windows XP after they've finished loading, and only on an external monitor. Did the new installation of Ubuntu hose my Dell Inspiron 6000 laptop's screen, or was it the Wifi network, or did the screen just coincidentally go bad minutes after I installed Ubuntu and seconds after I clicked the open Wifi connection?
View 5 Replies
View Related
Sep 7, 2010
I have a laptop that has been connected to an external screen ever since i installed linux on it but i now wish to use it as a proper laptop but i when i run it without the external screen, the laptop screen goes blank after the initial boot splash screen. Is there a way to fix this?
View 7 Replies
View Related
Jun 12, 2010
I have two minor problems with Ubuntu which I've been running on my aging Fujitsu-Siemens Lifebook for a couple of years now.
First, I recently upgraded to v10.04 with no problems. However, I've just applied the latest updates via Update Manager and the laptop will now hang after the welcome screen.
There are no error messages, just a black screen and the case fan runs a full tilt until I force a shutdown. I've waited 5 or so minutes to see if it's actually doing anything but it would appear that it isn't.
The only way to boot the laptop is to choose an older Grub menu option, then it boots up fine. It may very well be a hardware issue because another (newer) laptop in the household has updated no problem.
Next, I tried to change the password of the admin account using "Users and Groups". It appeared to work but then I had to use the old password to log in again. On logging in I am prompted for the new password, the error message saying that the "token ring" password (I think it's token ring, I'm doing this from memory) doesn't match.
Again I can live with this quirk but it would be nice to put it right.
View 4 Replies
View Related
Jun 2, 2011
Well, this has happened numerous times before when I had other distros, Ubuntu, Mint,and even Fedora, and then it didn't bother me because I had a GUI and a Desktop Manager, but now it's become a bit of a problem. I can read it okay, but I'd like to have it full resolution again. I'll post a link below
[URL]
Not easy to see what I typed, but I've tried adding "vga=773" to my kernel line but it didn't help. What do I do? *I hope I'm not being incoherent*
View 13 Replies
View Related
Apr 7, 2011
I am using DELL Latitude E5510 laptop with docking station. The problem I am facing is I am not able to switch screen b/w monitor and laptop screen, I tried with fn+F8 key. Actually I have installed open SuSE11.3(Linux) operating system.
View 1 Replies
View Related
Dec 24, 2010
I installed 8.04 ubuntu on my Dell Inspiron 9400 laptop. I upgraded it to 10.04. My screen now has a terrible wave on it when I scroll up or down.
View 3 Replies
View Related
Jun 22, 2011
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread
Code:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
[code]...
View 1 Replies
View Related
May 10, 2011
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies
View Related
May 15, 2010
When I change the "When laptop lid is closed" option in Gnome Power Manager to either "Blank Screen" or "Do Nothing" (by manually using gconf-editor), the screen itself doesn't turn off when the lid is closed. Obviously not a huge deal, as I could just change the "idle before sleep" on certain occasions, but I liked that setting it to "Do Nothing" previously would actually turn off the screen when the lid was closed.
View 1 Replies
View Related
Apr 7, 2011
i've got UBUNTU 10.10 installed on my laptop.After i turn my laptop on and the comp prepares 2 boot the OS,a screen asking me to choose which OS version i'd like 2 select.Now ideally i'd like jst 2 names on dat list namely-Ubuntu and win xp..But I've a host of other options as well like memory testblahblah'safemode'....wotevr....Is this ok 2 have so many OS startup options.Is there a way to get rid of unwanted stuff like changin the BOOT.ini file or in any other way???
View 11 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Dec 8, 2010
i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
Sep 22, 2010
I'd like to have my VNC sessions to a server use a separate display from the physical screen. So that e.g. I could have the physical screen locked in screensaver while the VNC display is unlocked.
View 2 Replies
View Related
Jan 1, 2011
I was using irssi in screen but lost connection. After I ssh'd back in to the server, I can no longer attach to that screen. screen -ls shows that the screen is already attached. I tried screen -D to force detach it, and it said detach but screen -ls still says it's attached. I tried screen -x and it just hangs there.
[sub@server ~]$ screen -ls
There are screens on:
4033.poe (Detached)
7728.irssi (Attached)
2 Sockets in /var/run/screen/S-sub.What can I do now?
View 4 Replies
View Related
Feb 28, 2011
When I am using emacs under GNU Screen, if I call C-x C-s screen hangs and does not respond to any keyboard input.
I can't reproduce this, but at least one time per day I have to kill my screen session and restart it.
View 1 Replies
View Related
Jan 15, 2010
I've been a happy Arch Linux user for years now. Recently, on my eee 1000he (an Atom netbook with intel GMA graphics) I've been seeing strange things. After it has been on for some time (usually hours), the screen starts to jitter, just for a fraction of a second, every now and then. After this has happened some times, the screen goes black (one time it went red). The backlight is still on and I can still ssh to the machine which reacts normal appart from the black screen. I can only regain the screen when rebooting. What could this mean? Is it hardware or software? X logs don't shown anything weird, where should I look? I haven't found anyone with the same problem on the net.
View 4 Replies
View Related
Jan 19, 2011
when insert ubuntu 10.04 cd to laptop [xp] this run ok [run from cd], but when in desktop vista the screen of ubuntu appears bigger than screen dimension so menu does not seem, what is the solution?
View 6 Replies
View Related
Dec 20, 2010
i recently update my linux ubuntu 10.10 when i update it and restarded it my os doesnt work anymore , my screen is also blinking and a dark screen background , what happen to my os ?
View 7 Replies
View Related
Feb 13, 2010
I am a recent convert to Ubuntu 9.10. I have installed it on my by travel laptop, which is docked when at home with a 22' ViewSonic screen.
Under Windows all is good, I just plug it in and whamo, I can close the laptop lid and use the Viewsonic as my primary screen.
Under Ubuntu, it appears the above is impossible. I seek your guidance as below.
Q. Is it possible dock my 22" screen as my primary screen with my laptop?
Q If it is possible, how do I do it?
View 2 Replies
View Related
Apr 18, 2011
When I try to connect a projector to my laptop (already running) and hit the fn+f7 (the designated button for switching screen), nothing happens. I see "no source found" on projector screen and my laptop screen works perfectly. Now if I restart the laptop with the projector connected, I see all the intial booting messages on the projector screen (not on my laptop), then the gnome login screen appears on both the projector screen and laptop (when the login screen appears on laptop it looks like it has lower resolution than my usual laptop resolution). But immediately after I log in, my laptop screen goes blank, and projector screen becomes the only active screen.
If I restart without the projector, again all normal operation on laptop screen is restored.
I feel like I am missing some very silly options. Any help is appreciated.
Here is the output of xrandr when the laptop is connected:
Code:
View 3 Replies
View Related
Aug 25, 2011
I have to work inside two environment. One Windows (local) and one Linux (remote).I've installed the screen linux utility in both.I'm able to open a screen on my windows, then in one tab, I opened a ssh connection to the linux remote and I start another screen.Samplelinux -- |0 linux remote 0| 1 linux remote 1 windows-- |0 linux | 9 windows I can switch between "linux remote 0" and "linux remote 1" using Atl+.This is configured in .screenrc (bindkey "^[0" select 0)How could I switch to "9 windows"?
View 4 Replies
View Related
Mar 17, 2011
I just started and very green, I got a old unit that has Linux instaled. I get home start it and I get a purple screen after gnu grub screen, I'm using a diferent mouse and monitor is all that changed from when I picked it up. I don't know were to start.
View 4 Replies
View Related
Jan 25, 2011
This obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies
View Related
Feb 13, 2010
My laptop screen will go black while i'm using it. I do not have any screensaver enabled. It just goes black (whenever) and I have to reboot to use my machine again
View 5 Replies
View Related
Jul 3, 2010
i installed ubuntu on my samsung x30 yesterday while connected to my external monitor. when i power on my laptop the samsung start up screen appears both on my laptop and monitor however as soon as ubuntu starts the laptop screen breaks into two solid colours, ubuntu only works on the screen.
View 2 Replies
View Related
Jul 20, 2011
My Laptop is not showing anything on the screen. It was working fine and when to sleep for a Hour and came back found my screen blank and laptop not responding to anything. I forced to shut down and restarted it but nothing happens as it tried to blink the led and fan has turned on but nothing on the screen not boot message. I tried to remove the battery and turned ON and tried many other option specified in the google help but nothing helped.
View 4 Replies
View Related
