I am having an install problem where the distro I am installing, installed at the wrong screen resolution. The display settings menu doesn't offer the correct resolution so I'm using half my screen real estate.
View 5 Replieswhat is the command or man/info page that show how to change screen/monitor resolution while in the bash shell?
View 1 Replies View RelatedDoes anyone know if there's a command I can put in Terminal to change the screen resolution?
View 3 Replies View RelatedI'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously.
Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks).
I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots.
So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.
I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. Altough I think this is a general linux and grub2 question. I do not have (or want) the X Window System installed. I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub:
grub> vbeinfo
VBE info: version: 3.0 OEM software rev: 1.0
total memory: 8128 KiB
List of compatible video modes:
Legend: P=Packed pixel, D=Direct color, mask/pos=R/G/B/reserved
0x112: 640 x 480 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24
[Code]...
Does it mean I have the driver? how to set it to 1024 x 600 in grub2?
I'm new to Linux I used to use Ubuntu, when I wanted to change resolution in ubuntu just go to xorg.conf but don't have this in Fedora 11. My resolution is 800x600 right now btw.
View 5 Replies View RelatedWhile attempting to install an external screen on my laptop I messed up the KDE screen settings and upon reboot I get a command line interface.Which configuration file should I edit to set up my screen so that I get my Debian lenny KDE GUI back?
View 4 Replies View RelatedI am not use X11 in linux. I use just terminal window. How can i change screen resolution?
View 5 Replies View RelatedI am using FC10. how do I change the resolution of the "Boot Up" screen? My monitor is 1024x768 capable but my boot screen is 1280x1024. I don't get anything until it finally loads X Windows. When my machine is booting up I cannot see the screen because my monitor can't handle it. When I hook it up to my other monitor (1280x1024 capable) I can see the boot up screen. I'd like to be able to see the boot screen in case there are any errors I need to se. How do I change it?
View 1 Replies View RelatedIs it possible to scale my screen to a bigger size? I have a huge TV as a monitor and at 1920x1080 on linux it is a bit of a strain for my eyes. on windows they have a feature to do this. You can make the text and other items, such as icons, on your screen easier to see by making them larger. You can do this without changing the screen resolution of your monitor or laptop screen. This allows you to increase or decrease the size of text and other items on your screen while keeping your monitor or laptop set to its optimal resolution
View 8 Replies View RelatedI've just finished installing Ubuntu Server 10.4 onto my ASRock ION330. I don't have a spare monitor lying around, so I've plugged my TV into my machince via HDMI. This works, but the text is tiny. There are too many rows and columns of characters (or equivalently, the font is too small). When I try changing the TV resolution to a smaller size, it just cuts out the rest of the text. So from the command line, how do I make the text bigger?
View 8 Replies View RelatedI am using Ubuntu 10.10 on a Dell Optiplex GX270, with the Intel video chip. I have a problem with my virtual consoles/terminals (<ctrl-alt>F1-F6). The default screen resolution was set to 1600x1200 at installation, which results in a nearly microscopic, unreadable font. I posted the problem on this thread on ubuntuforums.org, where they suggested adding GRUB_GFXMODE=640x480 and GRUB_GFXPAYLOAD_LINUX=640x480 to /etc/default/grub and /etc/grub.d/00_header. Still no joy--the console screen resolution still was 1600x1200.
I have noticed that the screen resolution changes three times during boot; it starts at standard VGA, 640x480, then switches to 1600x1200, then finally to 1024x768, which is my preferred resolution in X. But, if I switch to a virtual console, the resolution shoots up to 1600x1200 again. There are times when I like to use virtual terminals, and I would like to avoid eyestrain.
I am using Fedora12 on desktop. I tried to change keymap from systm->preferences->keyboard->layout. This changes my keymap successfully. I want to perform above activity using command line for my powerpc target. My powerpc target environment do not have KDE,GNOME or any x-windowing support. which command and which files to be overlooked for this?
I want to change keyboard layout not keymap from command line.
I would like to make all of the computers in our lab look/behave the same. I have messed around with some of gconftool-2 to change the desktop backgrounds, but I can't figure out the following:deleting the bottom paneladding the window list to the top paneladding the force-quite applet to the top panelremoving all menu items from the system/preferences menu but soundremoving all menu items from the system/administration menu but printing and system monitor
View 1 Replies View RelatedI was running scripts overnight from the command line (inside Screen on a Linux EC2 instance) and some errors that I was not tracking occurred. I want to "scroll up" or view more of the history in Screen, but I cannot seem to find any commands that will work. I need to see the onscreen output "further up" than I can on my current screen. CTRL + a is supposed to put me into scroll mode inside Screen, but it's not working.
View 4 Replies View RelatedJust got an HP dv6-2150 laptop. Dual boot with Windows 7 and 9.04 (9.10 will not work but that's a different story). The screen resolution is too low and is set at the highest option available (1024x768 which is a 4:3 aspect ratio). The HP uses the new Intel i3-330m chipset with on-board Intel HD graphics. The system is capable of 1366x768 resolution (16:9) - so how do I get it there? xorg.conf looks real generic - nothing specific to Intel.
View 7 Replies View RelatedI am running Ubuntu 9.10 on a new HP PC (Pavilion p6240f PC).This came with an Intel GMX X4500 Integrated graphics.My monitor is Samsung SyncMaster 2333. Initially I got a very bad resolution, Later I edited /etc/X11/xorg.conf (created the file) and added the following.
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30 - 75
VertRefresh56 - 61
EndSection
[code]....
With both 1600 x 1200 and 1680 x 1080 I get the resolution but I see lots of shadowing.(The letters are not crisp) Do I need to upgrade any driver ?
~$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
I've installed Ubuntu 10.04 on an old PC with an Intel 845 series motherboard, using an onboard graphics solution. By default, it boots with an 800x600 screen resolution. When I change the resolution to 1024x768, the resolution switches perfectly, but the mouse pointer disappears. The mouse can still be USED, but I have to 'guess' where the pointer is. The only way I have found to rectify the situation is to reboot, upon which the resolution returns to 800x600 again as well. Kubuntu 10.04 suffers from the same problem, only in Kubuntu the mouse pointer reappears when the resolution switches back to 800x600, so I don't need to reboot.
View 4 Replies View Relatedi changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
View 4 Replies View Relatedif its possible to change font size or style on CLI.
View 9 Replies View RelatedI use a program which makes a large image which I have to scroll to view. The program has no way to save the image, and I have no access to the source to modify it. The only way I have to get the image from the program is by screenshot. My goal is to save the full size image without having to piece together individual screenshots. I'm using this script to try taking a screenshot:
#!/bin/bash
window=$(wmctrl -l | grep "Program$" | awk '{print $1}')
wmctrl -v -i -r $window -e '0,0,0,6030,5828'
wmctrl -i -a $window
import -window $window ~/Desktop/screenshot.png
This uses wmctrl to get the window id ($window) for a window named "Program". It then tries to resize the window to the desired dimensions. It uses imagemagick (import) to save a screenshot.png on the user's Desktop. All of this works except the resize step. I can resize the window using wmctrl -r -e, but sizes greater than the screen size don't work. I'm using Ubuntu 10.04 and the Gnome Desktop. I run two monitors, but I've tried this with one of them disabled. Is there a way to resize the window larger than my screen to get a huge screenshot?
Part II: I tried using xrandr to set up screen panning, so as to have a bigger desktop than my monitor. xrandr --output LVDS --panning 2600x2500 This command makes the laptop screen pan over a 2600x2500 size desktop, even though it can only show 1440x900 at one time. To turn off the panning, I can use a similar command to set total size and with zeroes for the panning section. This gives me back my original laptop display behavior. xrandr --fb 1440x900 --output LVDS --panning 0x0 This is all done with xrandr, and does not require any Xorg.conf changes (my Ubuntu system doesn't even have an Xorg.conf).
My video card seems to only allow about 6.5 million pixels, even though the maximum dimensions are 8192x8192. That maximum seems to be the maximum for either dimension, but there is a limit to how many pixels can be drawn, which is the width multiplied by the height. Once I did the screen resize, I tried my script again and got a screenshot. The screenshot however is totally scrambled. I'm not sure if it's unable to take a screenshot of an off-screen window or if it is unable to handle the large dimensions of the window. With the panning display, the window should think it is visible, and the window manager should think it is on-screen. So there is a pixel buffer somewhere with those pixels in it, so there should be a way to get a screenshot.
Ive recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
I'm accessing a Red Hat Linux 5.5 machine with Gnome 2.16 and UltraVNC. I've started "vncserver" and am accessing my Linux desktop fine from my Windows machine. However, I can't change the resolution as I'm told: The X Server does not support the XRandR extension. Runtime resolution changes to the display size are not available.
View 2 Replies View RelatedI searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies View RelatedI have an installation of Maverick using command line only. It switches the monitor to standby after only about 5 minutes. Previous Ubuntu server and command line only versions do this too. Does anybody know where the setting is to change or disable this behavior? Perhaps something to do with ACPI?
View 2 Replies View RelatedI'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View RelatedAfter installing a Dell Optilex 280 desktop with Centos 5.4, I configured sendamil, squid and all the extras I needed for a proxy and email server. All was fine until I switched the machine off. I had changed the resolution before and all was working fine. Now I have lost my gui , the system starts O.K but goes blank after "starting udev". I can use webmin to administer the server from a nother desktop/laptop but the monitor is totally blank. I tried most configurations on the /etc/X11/xorg.conf file even tried to create a new one using X -configure but still nothing changed. I cant afford to reinstall because of the time it takes to update the box, our broadband connections are so expensive this end of the world (Zimbabwe) and not so efficient. I have looked at the logs and tried to google but the solutions wont work for me? I suspect there could be an issue with the intel graphics adapter?
View 3 Replies View RelatedI have used the below command to do that successfully for the previous version of ububunt, but this time I failed to do that with Ubuntu 9.10. I know I can do that manually by "sudo /etc/init.d/gdm stop" command. I try to change the name of /etc/init.d/gdm files, but the problem still exist.m"sudo update-rc.d -f gdm remove"
View 3 Replies View Relatedis there a way to change the gdm login screen (either the background image or the text in the login window) from the command line?i'd like to check several things at boot and report that on the gdm login screnn.
View 8 Replies View Related