I have an installation of Maverick using command line only. It switches the monitor to standby after only about 5 minutes. Previous Ubuntu server and command line only versions do this too. Does anybody know where the setting is to change or disable this behavior? Perhaps something to do with ACPI?
View 2 RepliesI have a couple of question regarding the screen blanker on Gnome desktop.I used to use a 1024x768 display with previous openSUSE distribution. With 11.3, I discovered the new "auto-configure" X feature. The default screen mode was 1600x1200, but I changed it to 1280x1024.My gfx board is a Matrox G400 DH. Hardware acceleration is disable because of a missing mga_dri.so (fall back to software rendering).I find some screen blanker modules are using almost all the CPU cycles. Animations are very slow, and it can take long before a keyboard hit or mouse movement makes to leave the blanker.
So the questions:- Is there a way to define another (smaller) screen resolution just for the blanker ?- Who should I try to convince to add mga_dri.so back in Mesa again ?- When the monitor go to sleep (DPMS), the blanker still is running, uselessly consuming CPU times. (I can see that because at the first mouse/kbd event, the monitor wake up and shows the blanker running.) Is there a way to configure the blanker to stop running when the monitor is sleeping ?- There are some modules which load images from HD (not the diaporama which load images in ~/images). But the shown image is always the default built-in one. Where is the blanker trying to load images from ?
I have used the below command to do that successfully for the previous version of ububunt, but this time I failed to do that with Ubuntu 9.10. I know I can do that manually by "sudo /etc/init.d/gdm stop" command. I try to change the name of /etc/init.d/gdm files, but the problem still exist.m"sudo update-rc.d -f gdm remove"
View 3 Replies View Relatedwhat is the command or man/info page that show how to change screen/monitor resolution while in the bash shell?
View 1 Replies View RelatedDoes anyone know if there's a command I can put in Terminal to change the screen resolution?
View 3 Replies View Relatedis there a way to change the gdm login screen (either the background image or the text in the login window) from the command line?i'd like to check several things at boot and report that on the gdm login screnn.
View 8 Replies View RelatedWhile attempting to install an external screen on my laptop I messed up the KDE screen settings and upon reboot I get a command line interface.Which configuration file should I edit to set up my screen so that I get my Debian lenny KDE GUI back?
View 4 Replies View RelatedI was running scripts overnight from the command line (inside Screen on a Linux EC2 instance) and some errors that I was not tracking occurred. I want to "scroll up" or view more of the history in Screen, but I cannot seem to find any commands that will work. I need to see the onscreen output "further up" than I can on my current screen. CTRL + a is supposed to put me into scroll mode inside Screen, but it's not working.
View 4 Replies View RelatedI am having an install problem where the distro I am installing, installed at the wrong screen resolution. The display settings menu doesn't offer the correct resolution so I'm using half my screen real estate.
View 5 Replies View RelatedI am trying to make a java application run on a barebone computer connected to a tv screen trough hdmi. I want to make this run as light as possible so gnome probably is overkill. currently I'm running fluxbox but I would like to encapsulate video and some other gui stuff in the program and run it command line(trough startup script.) Another way to do this would be running it when fluxbox starts in full screen. But I really don't know how to do this or where to edit the startup script so I can run it. I'm using ubuntu 10.04 server edition and only installed jre, fluxbox, and of course ssh-server.
View 4 Replies View RelatedI installed this graphics card update in kubuntu 11.04 [URL].... And when now kubuntu boots to a command line interface login screen I don't mind reinstalling to fix it, i would just like to install the latest version of the graphics card driver. I've tried twice with the same results, how i can fix it?
View 1 Replies View RelatedI have installed Ubuntu 6.06 LTS via the command line interface. I installed onto Microsoft Virtual PC on the mac. The installation completed successfully. On first boot, I see the text is spread out very wide on the screen. It's like the screen has been zoomed out greatly.
I assume I have to modify the x11 configuration, but I forget how to do this.
Here is an image of the screen:
I tried installing a more recent version of Ubuntu but ran into other troubles. more on that later.
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedI'm have much computer experience but am new to Ubuntu. I typed in sudo apt-get install ubuntu-desktop and it tells me it's already installed. Good. So it should work. I type sudo/etc/init.d/gdm start and the screen goes blank for 8 seconds three times in a row and then back to the command line. I have also tried gdm start without the path before and it says GDM already running. Aborting!
View 5 Replies View RelatedI need to execute evince from command line or from a shell script and open it directly in full screen, or start some program for presentation.
I mean:
$ evince (this opens evince)
$ evince /dir1/dir2/file.toview (this opens evince and the file.toview but not in full screen)
$ evince /dir1/dir2/file.toview 'in mode presentation'
I use a program which makes a large image which I have to scroll to view. The program has no way to save the image, and I have no access to the source to modify it. The only way I have to get the image from the program is by screenshot. My goal is to save the full size image without having to piece together individual screenshots. I'm using this script to try taking a screenshot:
#!/bin/bash
window=$(wmctrl -l | grep "Program$" | awk '{print $1}')
wmctrl -v -i -r $window -e '0,0,0,6030,5828'
wmctrl -i -a $window
import -window $window ~/Desktop/screenshot.png
This uses wmctrl to get the window id ($window) for a window named "Program". It then tries to resize the window to the desired dimensions. It uses imagemagick (import) to save a screenshot.png on the user's Desktop. All of this works except the resize step. I can resize the window using wmctrl -r -e, but sizes greater than the screen size don't work. I'm using Ubuntu 10.04 and the Gnome Desktop. I run two monitors, but I've tried this with one of them disabled. Is there a way to resize the window larger than my screen to get a huge screenshot?
Part II: I tried using xrandr to set up screen panning, so as to have a bigger desktop than my monitor. xrandr --output LVDS --panning 2600x2500 This command makes the laptop screen pan over a 2600x2500 size desktop, even though it can only show 1440x900 at one time. To turn off the panning, I can use a similar command to set total size and with zeroes for the panning section. This gives me back my original laptop display behavior. xrandr --fb 1440x900 --output LVDS --panning 0x0 This is all done with xrandr, and does not require any Xorg.conf changes (my Ubuntu system doesn't even have an Xorg.conf).
My video card seems to only allow about 6.5 million pixels, even though the maximum dimensions are 8192x8192. That maximum seems to be the maximum for either dimension, but there is a limit to how many pixels can be drawn, which is the width multiplied by the height. Once I did the screen resize, I tried my script again and got a screenshot. The screenshot however is totally scrambled. I'm not sure if it's unable to take a screenshot of an off-screen window or if it is unable to handle the large dimensions of the window. With the panning display, the window should think it is visible, and the window manager should think it is on-screen. So there is a pixel buffer somewhere with those pixels in it, so there should be a way to get a screenshot.
I have a many text files that have XML tags all shoved into 1 line. I want to create a new file that splits each XML tag onto a new line. code...
View 3 Replies View RelatedI'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View Relatedmy Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
[code]....
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
Code: cmd='date | wc'
$cmd If this script is executed, an error is generated. The reason written was that "The execution fails because the pipe is not expanded and is passed to date as an argument".What is meant by expansion of pipe. When we execute date | wc on the command line, it goes fine.then | is not treated as an argument. Why?
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
I tried
Code:
chown -R owner:group *
which does not work on the invisible directories (why?). When I used ".*" as wildcard it changed all (visible) files including the parent directory (the one I was currently working in which is the "dot") . I can change the invisible directories owner and group using dophin but how is it done from the command line?
I am trying to learn how to pass more than a one-command startup for gnome-terminal.
I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....
However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I got macbook pro 5.1 recently upgraded to 11.04, all works out of the box! However when I watch movies or play a game from time to time I observe a horizontal line in the upper part of my screen which I believe is a screen tearing.Depending on a movie player this effect is more or less visible.nvidia propietary driver enabledvsync enabledcompiz settings adjusted (refresh rate ->60, vsync)nvidia-settings -l is loaded with the systemMaybe it's not a huge problem but everything works fine under osx
View 3 Replies View RelatedI'm trying to convert this awk command from command line into an awk script, but just cannot get it to work:
This is what i have after my BEGIN
Am i missing something here? this just prints out the count for everyline, not counting lines on 5th field that match 'A'
how do you write the ASCII character #27 in the vim command line?
View 6 Replies View RelatedUsing netbook asus 1005ha with lucid beta 1 with most of updates on learning to use the CLI and headaches cd command does not seem to reconise directories here is a sample
Code:
yeh i know read the f#####g manual i am but any help would be greatly accepted tried sudo with same commands same problem did have a problem on my debian system that was to do with paths this is not the same on a different footnote anyone thinking of upgrading to lucid sit tight on 9.10 there are still to many issues that need ironing out for a system that is your main system.