i got follwing error while starting httpd service how to start httpd service i am using
Server version: Apache/2.0.46
Server built: Mar 22 2006 04:43:58
Cannot load /etc/httpd/modules/mod_log_config.so into server: /etc/httpd/modules/mod_log_config.so: undefined symbol: ap_month_snames
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I noticed my Firefox loading rather slow (took around 5 - 7 seconds to load and navigate pages, even google, and it would sometimes become unresponsive), I thought it may have been a addon problem, so I opened up a new Firefox profile with no addons but the browser crashed upon loading the certain page I was trying to view, and I figured I'd look into it later and use Chromium for a while (I'll be open, I was trying to watch an pron tube site, and when your, you know, you don't really feel like stopping to go technical and try to fix it or whatever), but Chromium said that the flash player wasn't installed. I thought it was kinda odd, but then again I didn't want to go technical and thought maybe since mozilla firefoxs engine loaded the flash, I'd use Mozilla Seamonkey which uses the same gecko engine. The flash wasn't working either on there.
I tried looking up to see if there was a 64bit deb package for flash, but they didn't have it, and I seen someone mention that doing the 'apt-get upgrade' upgrades it, so I did that, and it also said it installed some extra packages when doing it, but I figured it was just that getlibs grabbing the extra dependencies and went along with installing them (after all there shouldnt be much to lose since its from the repository, right?)
I restarted the computer to give the updates a chance to take effect (it didn't mention to restart, but I thought I'd go ahead and do it anyways to ensure it updated okay).
This is where the booting problem comes in: When my laptop restarted, the loading was going across very slowly (I have ubuntu studio installed through regular ubuntu, so it was showing the text filling up), normally it would just fill a little bit of the first "U" in "Ubuntu Studio" and then be done quickly, but now it goes slowly all the way, and when it fills "Ubuntu Studio", it stills stays there, it doesn't load on.
I pressed the down button to see the terminal and it says this:
Code:
I have no clue what to do now, and I wanted to ask for help before I go trying myself editing the command line boot process.
I am fairly new to Linux. When I loaded RED HAT 6 in Vmware it defaulted to command line, no GUI. Tried startx command and got command not found. Tried a whereis startx and it couldn't find it. Editied inittab and changed to runlevel 5 and it just hung at bootup. Had to change back to runlevel 3. Do I need load x-windows and if so how? RED HAT 5 loads fine in Vmware.
View 4 Replies View RelatedI read the man pages of batch and it says that commands or scripts scheduled using the batch command will only execute when the load average goes below 0.8. As a newbie I hardy understand what it means. Does it mean that the system resources are busy?Ans since I want to see the o/p of the commands I have set using batch, is there any way i can bring the sys load average below 0.8?
View 3 Replies View RelatedHad XP- formated hard drive - See's Ubuntu, yet will not install Ubuntu, check disc for defect, test memory and can not Boot from 1st hard drive.Bios is set to load from CD.
View 4 Replies View RelatedSlackware 13 didn't install correctly, and I accidentally installed it on my main hard drive on my Toshiba laptop, now it has the MBR all jacked up. I can't boot from CD. If my external usb HD is formatted in a linux format, I have the possibility to boot from that device, but as soon as I load another linux distro, such as ubuntu or pardus, it won't load, and actually disappears from my boot menu. Slackware is dead it runs into a Kernel problem and locks up and then i'm forced to reboot.
View 4 Replies View RelatedHow to configure load balancing server in Red Hat Enterprise 5.
View 1 Replies View RelatedI want to load a Linux Operating System (Austrumi Linux 2.1.7) onto a USB stick. Could any forum members recommend a good make? I am based in the UK.
View 12 Replies View RelatedHave been running Mandriva 11.04 and it's been ok, but now neither my preferred Browser, Chrome, nor Firefox will load?
View 6 Replies View RelatedI created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies View RelatedI reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.
I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.
I want to load grub2 from grub4dos.I want to load directly the grub2 core. I know how to load first 512 bytes from some patition by chainloader and load grub2, but what I need is to load directly grub2 core without passing by bootstriping code (first 512 bytes).So, my first boot manager is grub4dos, then I can load grub2 and later I load Ubuntu. But I think I have to edit --set-root
What I dont know is how.
In hdd 0,7 (sda8) I have Ubuntu 10.10 and /boot/grub/core.img is in sda8 (hd0.7)
I tried this way:
Code:
title grub2
find --set-root /boot/grub/core.img
kernel /boot/grub/core.img
My Setup: Dell Laptop (BIOS allows boot from USB) - Vista 32 bit installed, 4 GB memory
External 500 GB HDD (iOmega) - Partitioned as follows:
NTFS: 50 GB
/boot: 1 GB
below two on one logical volume:
swap: 5 GB
/: rest ~ 440 GBI installed Oracle Enterprise Linux on the external HDD.
Did not install the Grub bootloader as I don't really want a startup boot option. The way I was planning to make it work was: When USB HDD connected and laptop powered up, it'll boot to the Oracle Linux. When the USB drive is not connected and laptop powered up, it'll boot to Vista. When I boot with the USB HDD connected, nothing happens. I get a blank screen with a blinking cursor. The USB HDD light comes on though. Is the above plan possible, or do I have to have a Boot loader installed?
If I have to have a boot loader installed, how can I just install the bootloader and not have to reinstall Linux on the HDD. The Linux drive is currently empty, so I'm open to any good suggestions to partitioning it. I want to keep a small amount of NTFS space on that drive to store some windows files and documents that I can carry around. The rest 450 GB is open for Linux. And I Plan to install Oracle Database and Apps on Linux (which takes about 350 GB of space).
How to get the load average for each CPU core in multi core(eg:duel core machine) processor environment. I tried using,
Code:
1. cat /proc/loadavg
2. uptime
3. top
But all of those commands gives the load average for whole system but not particular CPU core. Are there a way to take the load average for CPU core(Or any mechanism that can be done programmatic manner).
Very strange Grub2 issue on my Dell Mini 10.
Had Crunchbang Statler on it, and after an update, it would hang at grub, before the grub prompt. ("loading Grub, Welcome to Grub" then blinking cursor, but no prompt or ability to get into rescue)
So I booted into a liveCD, chrooted in, and reinstalled Grub2, purging everything. No dice. Same problem.
So I figured the device maps weren't right, so I pulled off any important files via the live stick, and reinstalled #!. Same problem.
Did a bit of googling, and it seemed like it was most probably not a true Grub2 error, but a bios problem, so I reinstalled XP, flashed to a new bios (A11).
Then reinstalled, this time with Zenwalk (figured it might be a debian thing). Same thing. (note I replaced lilo with Grub2 for puroposes of testing)
I am running Apache 2.2.13 with SSL and SNI enabled. This is what the virtual host portions looks like:
<VirtualHost *:443>
ServerAdmin support@itherd.com
DocumentRoot /srv/www/apps/login.itherd.com/
ServerName login.itherd.com
ErrorLog /var/log/apache2/login.itherd.com-error_log
SSLEngine on
SSLCertificateFile /etc/apache2/ssl.crt/login.itherd.com.crt
SSLCertificateKeyFile /etc/apache2/ssl.key/login.itherd.com.key
<Directory "srv/www/apps/login.itherd.com/">
AllowOverride None Options ExecCGI
AddHandler cgi-script cgi pl
Order allow,deny Allow from all
</Directory> </VirtualHost>
<VirtualHost *:443>
ServerAdmin support@clubherd.com
DocumentRoot /srv/www/apps/app.clubherd.com/
ServerName app.clubherd.com
ErrorLog /var/log/apache2/club.clubherd.com-error_log
SSLEngine on
SSLCertificateFile /etc/apache2/ssl.crt/app.clubherd.com.crt
SSLCertificateKeyFile /etc/apache2/ssl.key/app.clubherd.com.key
<Directory "srv/www/apps/app.clubherd.com/">
AllowOverride None Options ExecCGI
AddHandler cgi-script cgi pl
Order allow,deny Allow from all
</Directory> </VirtualHost>
When I start Apache it ask me for the pass phrase for the second host (both hosts have one). When I browse to first host it have recognized the loaded its certificate. When I go to the second server I get am untrusted message because it is using the first certificate. I have found and followed the directions of several web posts: [URLs]
For some reason I can't load any webpages with FF. I get this error: Firefox can't establish a connection to the server at en-us.mozilla. I can ping everything and ssh and other protocols work just fine. Here is the output of my /etc/resolv.conf file (Comcast)
# Generated by NetworkManager
nameserver 68.87.71.230
nameserver 68.87.73.246
I successfuly installed CentOS to my Dell laptop using CentOS_5.5_Live_DVD.iso and mounting it to a USB flash drive with iso2usb.exe, Now my laptop will Not load CentOS when I remove the USB flash drive, I get a messege saying "no system found".
View 5 Replies View RelatedI don't know where to begin with this problem, because I'm not really sure what is causing it. What is happening is that every now and then my cpu load jumps up to 90-100% and just stays there. Programs that typically take a 1-5% of the cpu load start taking up around 40-50% of the total load. Everything bogs down to the point that only a restart fixes it. Does anyone have any idea on what might be happening?To give a little background, I recently switched from Ubuntu 10.04 with Gnome to a dual boot with Windows XP and Slackware 13.1 with XFCE, Slackware being the main boot. What I'm experiencing now never happened with Ubuntu either. I will say that it does seem to happen when I stream media (movies and music) online, but it doesn't just start immediately. The increase occurs at irregular times, so I can't pinpoint one thing that causes. Moreover, I can't find a process that might be causing it
View 4 Replies View RelatedI have an old laptop I bought for $20 & thought I'd install Linux & XP in a dual-boot. It couldn't handle the MINT installer, so I thought I'd go with Debian. XP was already on there, so I ran the Debian install CD (LXDE), set up the 2nd partition, and finished installation. It rebooted once, but since then will not load Debian.
I get the GRUB menu, pick the default (not single user), it runs through all the lines of text down to the block that says "starting gnome display manager gdm" & maybe 4 lines after that (which I can't read in time)... then the screen goes blank, there's a brief flicker, the CPU thinks a bunch, and then there's usually a low-pitched BOOP at which point the CPU stops thinking & the screen just stays blank. The power is still on, but nothing happens.
Anyway, I don't know if it has an ATI card or whatever (saw something online alluding to that being a problem.) I also don't know how to use the single user mode, or how to display error messages, or do anything useful in the command line. Haha... But I'm a novice programmer & "computer literate" outside of Linux, so I can learn.
The laptop has 128MB of memory (which functions perfectly according to MemTest 86), I think a 450MHz PIII processor, 20GB HD (split between XP and Linux), a dead battery, a slightly damaged Power Supply, damaged screen...
I have ubuntu 9.04 ultimate edition 2.4 ,I am getting grub load error 18 from many days .. how can i get rid of this problem .. i used to remove the jumper & CMOS battery of motherboard whenever i got this problem ,but now even that is also not helping .. for some 2 days there wont be any problem & then the problem again repeats
View 4 Replies View RelatedI have a HP tx 1000 that a friend of mine gave me. The only problem is that he formatted the HD without a back up or recovery CD.The machine is a HP tx 1000. On start up it asks for the Windows installation disk.....blah, blah, blah. When I try to load the Live Disk it gives me an error about recently added software.The problem is that I cannot boot to the disk because the Windows firmware is in the way.
View 14 Replies View RelatedHow to reduce the load average? I have two linux machines.. now my problem is that both the machines having same configuration and same processes are running in those two machines... But in one machine the load average is more than 3 and in other it is 0.5(when i am using top command).For this load average one machine(where load average is more) is slow when i am running application on it..
View 5 Replies View RelatedI burned about 5 different CDs and could not load Ubuntu onto my computer. I would get error messages. I then took the CD and tried it on my wife's computer. Instant success. My present computer has Ubuntu 9.10 64 bit. The optical drive is relatively new and has been used rarely.
View 4 Replies View RelatedLoaded iriverter through automatic Ubuntu Software Centre, it is listed under Applications Sound and Video but it will not activate or load when I click on it. The site saids that adobe is required but I have adobe loaded.
View 14 Replies View RelatedI wrote a script to extract and get the the name of *.gz in a foler . Since running that script every 10 minutes, load average on my server increases more than 10.I checked with 'top' and it showed many D process.
View 2 Replies View Related