I want to open 177 port of remote server for mypc.com.
Code:
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 177 -s mypc.com -j ACCEPT
I wrote this at iptables, but I could not connect mypc.com with remote server.
Kindly let me know what I am wrong?
I am trying to connect to my linux server using an SCP Key (PPK), but I can't get through using Putty, WinSCP, etc. I think Port 22 might not be open, but I don't know how to open it if I can't at least access the server using SSH.
View 3 Replies View RelatedIf I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedI have sendmail running on my centOS 4.6. My lamp server also runs on it. I want to send mail through php mail function. when i execute php page, which fires the mail function, it takes so much long tim1 say even 1 minute, and at last displays that message sent successfully. Suppose, destination address is [URL].... I did not get any mail there. My server is running in LAN. I checked the status of sendmail, it shows me that it ios running. when i issue "nmap localhost" it shows me that SMTP port 25 is open, but when i issue "nmap myserver" (192.168.1.20 myserver ( written in hostfile)), it does not show that SMTP port is open.
I checked the /var/log/maillog, one person in my previous post advice me to see that. There it shows that message is accepted for delivery...but i do not get any mail in my destination, even not in spam folder. One more confusion is that, in my case my server is in LAN and if I am at all enable to open the SMTP port on it, does i need to open SMTP port on my router (which connects my LAN to internet) also needs to open? I think no, because SMTP is application layer protocol, it will wrap my mail in IP packet, which router just need to forward. am i right?
I am running lmgrd on CentOS5, but it returns Failed to open the TCP port number in the license. The port is 27000, how can I open that port?
View 5 Replies View RelatedI have Linux server (centos) in my company ,In Server have two Ethernet card we are using one for getting internet connection via eth0 and another one is passing network is shared through this ethernet eth1.Network is shared through this linux squid proxy server to Windows client .But thing is In Windows client Browsing internet via proxy is fine . But while ping google.com in cmd it say could not connect.
View 2 Replies View RelatedI have Linux server (centos) in my company , Network is shared through this linux squid proxy server to Windows client .
How to open port 995 and 587 for Windows client because Outlook are not working in Windows Client ...
How to open this port for Windows Client.
VERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
I've got a server listening on a port. when I stop the server the port stays open for some minutes. How can I close it immediately?
View 2 Replies View RelatedOur DBA has an application running on Server2 which needs to connect to Server1 (Linux OEL5.5 server) thru port# 9171. I use telnet to test basic connectivity.What should I do on Server1 in order to open up port#9171 for connection.
View 4 Replies View RelatedI hear that it's a bad idea to edit iptables by hand.
I want to open 443. Quote: iptables -A INPUT -p tcp -m tcp --sport 443 -j ACCEPT
iptables -A OUTPUT -p tcp -m tcp --dport 443 -j ACCEPT
Since I'm not at the box, I can't use the nifty GUI.
How might one do this via terminal?
OS: CentOSv5 (RHELv5)
i have centos5.3 installed with iptables firewall, i want to open port 5222 as i want to access application which uses port 5222 from internet.
View 14 Replies View Relatedfrom my windows box at work i can only connect to some ports (pop3, telnet, web)also, i can connect to port 1234 (as an example)everything else is blocked.I'm trying to connect with Microsoft Terminal Service Client to my linux box (cant install any vnc)but haven't found a way to make Gnome remote desktop to listen to the port i need (1234).I'm using fedora 13.anyway, i would appreciate any advice on what software to use or hot to configure my Linux box get remote connections from windows box on that certain port.
View 5 Replies View RelatedMade some network and hardware changes, and now I can't get the mailserver to work. It seems that sendmail can't loop to itself on 127.0.0.1. When I nmap localhost, I find that port 25 isn't open.
Naturally, nothing has changed on my system except for different routing, interfaces, etc.
So the question for sendmail gurus,is where should I be looking?
How to open port at iptable?
My box is centos 5.4.
I wanto to open UDP 177 and TCP 6000~60010.
I can connect my box through putty now.
I want to open port 2700 on my firewall but I don't know how I try with Code:iptables -A INPUT -i eth0 -p tcp --sport 2700 -m state --state ESTABLISHED -j ACCEPT But the port is not open I see the firewall configuration with the command setup . I use CentOS 5.3 here a screen of my configuration :http://upbg.net/out.php/i3537_sshot3.pngCurrently my firewall is off because I don't know how to turn on 2700 when the port is open I will turn on firewall .If I write 2700 in other ports field will 2700 be open ? Before 1 month I try but the port was not open . I have only 1 last question will firewall reduce the load of the my server now mysql use many CPU % and I just don't know why
View 14 Replies View RelatedI wonder how can I only open 1 port out of this two on my CentOS Machine:
Code:
[root@389-ds ~]# netstat -pant | grep "ns-slapd"
tcp 0 0 :::389 :::* LISTEN 7956/ns-slapd
tcp 0 0 :::636 :::* LISTEN 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.142:4806 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.142:4805 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.146:1699 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.47.177:4986 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.146:1698 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.146:1697 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.47.177:4985 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.146:1701 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.142:4808 ESTABLISHED 7956/ns-slapd
[root@389-ds ~]#
I have Fedora DS Installed and when I a trying to access through the client ldap:// is working but not ldaps://
I am trying to open the telnet port on my system with port 4100 and for the same i have inserted the entries in iptables file using below command./sbin/iptables -A INPUT -s 132.186.208.83/24 -p tcp �-dport 4100 -j ACCEPT.
View 1 Replies View RelatedHow We can Open PORT 2095 IN linux
View 3 Replies View RelatedOn my RedHat 9 , I want to open tcp port 4965 but my server does not contain /etc/sysconfig/iptables . Can you please let me know how to open this port?
View 6 Replies View RelatedI heard when running Ubuntu I need to set it to open with one port. I had a friend ran Ubuntu on his laptop at school and had other Ubuntu users at school got access to his computer, is that possible?
View 2 Replies View RelatedRunning openSUSE 11.2 x86_64.Here's what a nmap of my IP provides:
PORT STATE SERVICE
23/tcp open telnet
80/tcp open http
[code]....
I want to open the port 18680 on my remote Fedora 14 machine. I didsudo iptables -I INPUT -p tcp --dport 18680 -m state --state NEW,ESTABLISHED -j ACCEPTsudo iptables -I OUTPUT -p tcp --sport 18680 -m state --state ESTABLISHED -j ACCEPTsudo service iptables saveThe status returned is OK.I have also opened the port on my security group on Amazon. Also, I rebooted the machine.When I use the browser to view the application running at port 18680 the browser cannot connect.
View 1 Replies View RelatedI have system with debian linux installed. i got to know that debian doesent have IPTABLES firewall installed in built. i found the shoerwall firewall installed on system. now i wanted to open port no.7 for application comunication purpose please let me know if any one knows.also one more thing.. if i type command iptables --list i can see list of rules installed on ssytem....confuse which firewall application installed on the system.
View 14 Replies View RelatedIs it possible to open dyndns port at iptables?I have a remote server which is cenots 5.5 x86 and uses iptable rules. And my local pc is windows 7 x64 and have a dyndns address as mypc.dyndns.org.I want to connect local pc with mypc.dyndns.org to remote server with iptable rules as follows.Quote:
# Xmanager
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 6000:6010 -s mypc.dyndns.org -j ACCEPT
[code]...
I have samba running on 192.168.100.209 and I am trying to open samba ports only for hosts in 192.168.100.0/24 network.. I have added following rules to iptables. But still I am not able to connect from machines from 192.168.100.0/24 network
Code:
iptables -A INPUT -s 192.168.100.0/24 -p tcp --dport 139 -j ACCEPT
iptables -A INPUT -s 192.168.100.0/24 -p tcp --dport 445 -j ACCEPT
What's wrong with the above rules ?
I am only getting 4.7kb/s, dispite there being 31 or so Seeders. The port is just opening and closing it seems, I have no idea why though.The port was opened both with firestarter (which isn't supposed to be firewalling ATM) and "sudo iptables -A INPUT -p tcp --dport 6884 -j ACCEPT".It was also opened under the 'Application Sharing' menu of my router.
View 6 Replies View RelatedI have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
I am using Fedora 13 64bit. My eclipse program starts a server on port 9050 but I shutdown the program, eclipse fails to properly shutdown the server. Restarting eclipse has no effect.
How can I close or unbind a port forcibly from command line?
I know rebooting or log off and back on will clear the ports but this much slower process for me. I am looking for forcibly closing the port in command line.
Ok For some reason I open my ports in security and firewall. I open ssh and other ports and port 7001 for example but when I go to check to see if they are open or try to connect to them. It shows that they are still closed. I am using - [URL] Also yes my ports are open on my router. I know my router works fine with opening ports because I have shoutcast setup on another computer with xp that is currently running. I am willing to pay for who can ever get this fixed for me...
I open the ports in graphical mode.
