Is there a way to get colored output when using tab completion in a terminal? My colors are fine everywhere else so I know that I've enabled a color terminal successfully. Using bash in Ubuntu (10.10).
View 1 Replies
I switched to zsh, but I dislike the completion. If I have 20 files, each with a shared prefix, on pressing tab, zsh will fully complete the first file, then continue going through the list with each press of tab. If I want one near the end, I would have to press tab many times.
In bash, this was simple - press tab and I would get the prefix. If I continued typing (and pressing tab), bash would complete as far as it could be certain of. I find this behavior to be much more intuitive but prefer the other features of zsh to bash.
Is there a way to get this style of completion? Google suggested setopt bash_autolist, but this had no effect for me (and no error message was printed upon starting my shell).
I know how to redirect the output of a terminal to a file. For example, if I want to list all the files in ~/Documents and output to a file called test.txt, I would do this: ls ~/Documents > test.txt The question is, can I copy the output to test.txt AFTER I have carried out the command? This would mean that I wouldn't have to know in advance whether I want to copy the output to file. I want to do something like this: ls ~/Documents Then this: <bash command for copying standard output to test.txt>
View 2 Replies View RelatedRegarding this task, I am able to print colored output in my putty sessions using tput or ASCI codes but whenever I tried to send that output through mail command to my outlook maillox, It always goes without colored. I need to produce those coloured output of the scripts as it is in mail.
View 1 Replies View RelatedI wondered if theres a way to do rotational style completion in bash similar to the behavoir on cmd.exe, I've found it speeds me up in regard to entering commands
View 2 Replies View RelatedI am writing completion function for one PHP framework called symfony. It has command line interface with syntax:
Code:
symfony [options] [namespace:]action
I want to make action be autocompletable. The function is simplest so far:
Code:
function _symfony_commands()
{
[ -r "cache/completion/.sf" ] && cat cache/completion/.sf
}
[code]....
But, if there is : symbol which separate namespace from action problems coming:
symfony doct[TAB]
will be completed to
symfony doctrine:
But nothing happens if you want complete after : symbol. I've found out that for readline there is three words because it splits line with $COMP_WORDBREAKS
Code:
$ echo $COMP_WORDBREAKS
"'><=;|&(:
I played with $COMP_WORDS array and tried every thought I had to make it work, but failed.
What I should do to escape colon and make readline consider it as one word? Or there is way perhaps to workaround it?
tab-completion indexes system folders (like /usr/bin, /usr/local/bin)! so say i'm in a folder that has two files, 'text' and 'myprog', i type in an 'm' then tab, and i get hundreds of results including 'mysql', 'mysqlconfig', and others as im sure you can imagine. is there a way to set it to default or something else that will only make it index the current folder?
i tried changing my PATH variable so i could execute programs in the current directory without './' - what i added to PATH was ':.' at the end (apparently this is not the way to do it... :S). i tried resetting PATH various times ('unset PATH', 'PATH=$whatever...') but this has not fixed the problem. using 'unset PATH', of course, removes everything from PATH, which meant that functions (like 'ls') in /usr/bin and /usr/local/bin can't be found. obviously i want those to be found, but i would rather not tab through them!
For some reason bash is acting really really weird. When I use my gui terminal, and I tryto use tab completion, it freezes up the terminal, and I can't edit the line at all unless I do a ctrl+c.and when I try to do tab completion in text only mode it prints out : "Error: Can't open display: (null)"again and again and again, and I have to do a ctrl+c, also in text only mode it will randomly log me out. I have tried checking for blown caps, but there weren't any, and all the other programs work fine except for the command line. I am using bash version: 4.1.5(1)-releaseand gnome-terminal version: 2.30.2
View 5 Replies View RelatedI notice the colored syntax and keywords in the terminal - the green, the blue etc? I did this in my machine a long time. Now I cannot trace back to how I did this. I need to do this in a new machine right now.
View 3 Replies View Relatedhow do you get color in the terminal like DSL in red-hat 9.
i have red-hat 9 running on a old 3dfx gaming pc I'd post a pic of the DSL terminal but the site would not let me
New Fedora 12 install - I installed the bash_completion package, but it's not filling in knowhosts for ssh. It worked fine in Fedora 11. Is there something I've done wrong, or is this missing in F12?
View 6 Replies View RelatedJust installed 10.04 64bit and in gnome-terminal i have no bash completion when sudo is used.For example:apt- gives apt-getbut sudo apt- does nothing, i get no suggestions from the terminal.
View 6 Replies View RelatedI have disabled root ssh logins for security. When I am logged in as a normal user over SSH and do a su into root the tab-completion stops working with apt. It still works when doing normal file-browsing, on the original user1, and it has worked previously when logged directly into root. How do I make it autocomplete again? I am using Debian Stable on a headless homeserver.
View 3 Replies View RelatedCan fedora do bash completion of package names in yum?
View 4 Replies View RelatedOut of the box, Bash in 10.04 is configured such that it won't expand/complete parameters when there's a single match for a parameter with a leading wildcard. For example, if I have the following files in a directory:
Code:
ABC.bin
DEF.bin
GHI.bin
...and I type cp *E*, I expect to be able to press TAB and have Bash expand *E* to DEF.bin, since that's the only file in the directory with a capital E in its name.
(Note: if I actually submit the command with the wildcards in place, the correct file will be used then, but I don't get to see it beforehand.) I imagine there's something in /etc/bash_completion that's preventing this from working properly. Does anyone know what it is?
[URL]
Code:
#if [ -f /etc/bash_completion ]; then
# . /etc/bash_completion
#fi
What versions of Ubuntu have this commented out? Every version I have used always has this uncommented.
According to the Bash man pages, Quote: HOSTFILE Contains the name of a file in the same format as /etc/hosts that should be read when the shell needs to complete a hostname. The list of possible hostname completions may be changed while the shell is running; the next time hostname completion is attempted after the value is changed, bash adds the contents of the new file to the existing list. If HOSTFILE is set, but has no value, bash attempts to read /etc/hosts to obtain the list of possible hostname completions. When HOSTFILE is unset, the hostname list is cleared.
Here's the line in my .bashrc where HOSTFILE is set:
Code:
export HOSTFILE="~/.hosts"
I opened a new bash session, created ~/.hosts, filled it with the names of servers that I wanted to expand using tab completion. then typed
Code:
ssh p<tab><tab>
expecting to get a lists of all of the hosts in ~/.hosts starting with 'p'. Bash simply beeped at me twice.
I tried
Code:
$ shopt hostcomplete
hostcomplete on
Code:
ssh bchittenden@p<tab><tab>
same results.
[code].....
/etc/bash_completion.d/slapt has a syntax error that causes x to fail to load. I had to move the file to be able to run x. Here is the offending file:
[URL]
I've spent some time searching for answers to this and I haven't found much at all.Please feel free to post pointers to other threads that discuss this particular problem, if you find any.The problem is that in bash I want to mount an iso file to inspect the contents with the command:Code:sudo mount myCD.iso CDMount -o loopThe command works fine, but pressing tab to complete either the iso filename or the CDMount directory does not work. The completion suggestions I get are existing mountpoints which The completion suggestions should include the files and directories in the current directory. This worked with Ubuntu 10.04 and not with 11.04.
I have a bash script that checks for contents in a folder every 15 seconds and then acts on it's contents. This works great for the average size file however on very large files it starts acting on the file before it's completely written. Is there a facility in bash shell to get a file complete signal or such? here is trigger to launch a larger script.
Code:
#!/bin/sh
while true
do
$HOME/bin/hpgl.sh >/dev/null 2>&1 &
[code].....
hello
I tried to find a good subject but it was the best of mine, anyway I'll explain it here.
some time I do some thing like installing a new application in Linux terminal of my office PC but it take a long time and I have to go home during its installation or configuration process that it is not good to cancel it.My current solution is abandoning the process until next day. I wanted to know is there any way to redirect an input and out put of a terminal to another one, if it works I can continue my abandoned process by ssh to my Linux office PC and redirect that terminal to my new remote sshed terminal from my home.
Thank a lot for any help.
Out of X I have auto-completion for a command parameter (e.g. 'aptitude upd(ate)') but in gnome-terminal I have auto-completion only for the command, not for its parameters. Is it possible to have that?
View 1 Replies View RelatedWhat does the following Shell program do ??: () { :| : &} ; :Warning: My computer got hung when i tried to execute this.Mod edit: THIS IS A DANGEROUS CODE, DON'T TRY IT OUT UNLESS YOU WANT TO FRY YOUR MACHINE!
View 2 Replies View RelatedOver SSH when I do a "ls" command, I see some directories with a green background and blue text. What does this mean?I think it's related to a problem I'm having. I have the directories shared over the network. I'm the owner of all the directories but when I tried to move one of the colored directories to a different location (over the share from MacOSX) I got a generic "access denied" error.
View 6 Replies View RelatedNow, I have one script called "defcon" defcon gets the current DEFCON level and outputs it using echo.
Code:
#!/bin/bash
DEFCON=`curl -s http://members.tripod.com/~Swat_25/defcon.html | sed -n '/^$/!{s/<[^>]*>//g;p;}' | sed '/^$/d' | grep '[12345]$'`
echo "The current DEFCON level is $DEFCON"
The second script ("tweet") updates my twitter account.
Code:
#!/bin/bash
curl -s -u USER:PASS -d status="$@" http://twitter.com/statuses/update.xml > /dev/null
What I want to do is be able to update my twitter account with the current defcon status (this is really more of a learning thing than something I actually want to be doing). The original script for tweet replaced $@ with $1, but if I use:
tweet `defcon`
it only uses the first word in the string, similarly if I used $2 or $3.So I changed it to $@. The normal function still works, but typing:
tweet `defcon`
updates twitter with nothing.
EDIT I should mention the /dev/null is there to catch the output of curl, otherwise it won't run silently. It still updates twitter normally with the send to /dev/null
I would like to compare the (screen) output of one bash script with the (screen) output of another bash script to ensure the output is exactly the same.The reason for this is that I am receiving a consolidated data feed from an IP address and have moved some of the data feed to a 'new' source IP address. I will turn off the feed from the original once satisfied that the new is receiving the same data. The format of the output from the scripts are exactly the same.
Tried so far
./IDCGRE.sh | grep FX.CK | diff < ./IDCGRE2.sh
./IDCGRE.sh | grep FX.CK | ./IDCGRE2.sh | diff
[code]...
I would like to get the command and it's output redirected i have tried using the below but my syntax seems to be incorrect .
<<EOF
$(ls)
EOF
I would like to run a bunch of SQL commands from mysql client in bash. However, I would like to store the output in different variables. E.g.
Code:
var1=`mysql -u[user] -p[pass] -D[dbname] -e "Query1"`
var2=`mysql -u[user] -p[pass] -D[dbname] -e "Query2"`
[code]...
What is the output of "date -u +%jXfce|sha256sum|sed 's/W//g'" if you run it in a terminal emulator?
View 3 Replies View RelatedIs it possible to copy the output into the clipboard without using the mouse?
For example, I would like to do something like this:
$ pwd >> clipboard
