I'm new to using a BIND DNS server. I currently have one set as a master zone on my LAN. My question is how can I add a record for my local lan that will resolve without typing in the FQDN? For example I want to be able to type "server" instead of "server.domain.com".
View 6 RepliesNeed Bulk record creating for BIND DNS server. I have information in a file I need to crate a new zone and A-record. I have 10000 domains in a file. Is there any tool available to do this @ one go
View 4 Replies View RelatedI am using bind for DNS services on RHEL 5. The forward lookup is working fine. When I try to do a reverse lookup at the server, it shows the correct output but when I try lookup from Internet it shows something like - "mysite.com points to a.b.c.d, which has no d.c.b.a.in-addr.arpa PTR record"
Here are the files:
/etc/named.conf
options {
directory "/var/named";
statistics-file "/var/named/data/named_stats.txt";
};
controls{
inet 127.0.0.1 allow {localhost;} keys {rndckey;};
};
// Declaring reverse lookup zone
// Declaration of domain name resolution
view intranet {
zone "mysite.com" {
type master;
file "/var/named/mysite.com.intranet.hosts";
}; .....
I installed bind & did not install chroot. I set up a fictional domain kelly.local. I am able to resolve FQDN (example: angus.kelly.local) in both dig & nslookup & ping on linux boxes.
I want to be able to resolve bare host names (example: angus) using bind. I get mixed results.
(1) linux boxes resolve bare host names & FQDNs just fine using nslookup & ping, but not dig. dig gives error:
; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_5.3 <<>> angus
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 15241
[Code]....
what is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies View RelatedI want to use single label host names on my local LAN, without using any domain (at least no registered one). My machines should be named in a fashion similar to 'myserver', 'mydesktop' etc. so that i from a browser on any LAN machine may write 'http://myserver', and get the webserver on 'myserver' (so NO domain part, e.g. myserver.domain).
Do i need to create a DNS zone for each host or is there a way to put all host in a single zone, if so; which? Would such a name be considered a root domain?
I have a Windows 7 professional x64 pc that intermittently fails to resolve host aliases. The nameserver is a Fedora 11 system running bind 9.6.2-p2. Its cannonical name is trixter.intranet.org, and it serves several web sites, each with a different host alias: hg.intranet.org, svn.intranet.org, bugzilla.intranet.org, etc.
Occasionally, the Windows pc will be unable to find any of the aliased hosts, even when it can find the canonical name. The aliases will be un-resolvable for a period of several minutes, and then, with no intervention, they can be found again. Trixter can always resolve the aliases to itself.
Even stranger, when I use Cygwin from the problematic Windows 7 PC, it CAN resolve the hosts. I can ping hg.intranet.org from a Cygwin shell, but not from a cmd.exe window. Administrator privileges make no difference.
Whwn I am sending mails , I used too get message like
Host found but no data record of requested type.
MTA: postfix
Issue with the 'host' command that comes with bind-utils package.We don't have any browsing/name resolution issues except to the following two sites:
[code]....
command [URL] returned:
www.aeroplan.com is an alias for www.halb.aeroplan.com.
www.halb.aeroplan.com has address 207.34.195.17
;; connection timed out; no servers could be reached
;; connection timed out; no servers could be reached
[code].....
I have tried to run the "host" command against different DNS caching servers I have access to all produced the same timed out error. I called Aeroplan technical support to report the issue to them and from their perspective, they have no problem accessing the website.And we don't have any problem accessing any websites ourselves if "host" return A record lookup without the timed out error.
1. It's not our firewall filtering out packet. I tried it on external facing server without firewall and got the same result.
2. It's not our DNS caching server cause same errors are observed on our ISP caching server.
3. It works on an altogether network, from a Windows Vista desktop, through IE 8.
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
I am going to configure sentmail server i.e[root@mailserver ~] on Red Hat Linux 4 Enterprise.Already I have configured DNS server. I want to add record of my mail server in my DNS server.Kindly just guide me that what
Code:
$TTL86400
@IN SOAns1.mydomain.com. root.localhost(
42; serial (d. admin)
3H;refresh
[code]....
what is the use of bind & cache Pkg in DNS server is it posssible to configure DNS without cache & how
View 2 Replies View RelatedI want to create a Ptr record on the Dns server. Dns server is Fedora Core release 1 (Yarrow). And We have been using zone files. How can I create a Ptr record for an ip address on the Dns server?
View 2 Replies View RelatedIt it possible to setup a bind server for my internal network at home? Currently, all clients DNS requests go to my Verizon FIOS router, which also acts as a DHCP server. I would like to setup a another DNS server using BIND for studing.
Current setup:
Client --> Router (DNS Server) --> Internet
New BIND server setup:
Client --> BIND Server (2nd DNS) --> Router (Primary DNS) --> Internet
How would I go ab this? Would I have to configure a cache naming DNS server?
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies View RelatedIm going to registrate a Host on the fog server database.
i have done this befor on a working system befor, so i kinda know how to do it.
Im booting from the network, and im finding the server, and chose Quick host registation ( i have tryed the full host registration, but it dose not work there either)
after the Quick host registration and loading, this show's up:
Loading fog/kernel/bzimage......
decompressing linux .... Parsing ELF......Done
Booting the kernel.init.gz....
pci 0000:23:00.1: BAR 6: no parent found for of device [0xffff8000-0xffffffff]
unable to query synaptics hardware.
[Code]....
I have a FTP server (vsftpd) setuped on a Linux box (Ubuntu server). When I try to connect with a computer on the same network everything works fine as expected.But as soon the IP is external it won't connect..I first assumed the port was blocked, but then:localserver:$ sudo tail -f /var/log/vsftpd.logWed Jan 13 14:21:17 2010 [pid 2407] CONNECT: Client "xxx.xxx.107.4"remotemachine:$ netcat svn-motion.no-ip.biz 21220 FTP ServerAnd it hangs there. Do any ports other than 21 need to be open?
View 2 Replies View RelatedIm setting up my initial server on rackspace hosting and im not sure which server to pick.I plan to run a wordpress driven image blog.Mainly what i would like to know is which server is best for my application & why.
View 12 Replies View RelatedI and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
View 1 Replies View RelatedMy test messages from one mail server to another are getting sent to my spambucket and the only error in the logs is: warning: numeric domain name in resource data of MX record for [URL]: 74.63.64.42
View 1 Replies View RelatedI have a BIND server that I'm setting up with different views. There is another server out on the public Internet that currently handles all inquiries for this domain. I had installed the Yum packages, chroot, etc. and edited the config files by hand. When that didn't work, I erased the server and started over using Webmin to build everything for me. Same result. I want to setup and verify everything is working on this new server before I take it into production.This is in /var/log/messagesQuote:
Jun 13 21:33:20 dns1 named[13838]: starting BIND 9.3.6-P1-RedHat-9.3.6-4.P1.el5_4.2 -u named
Jun 13 21:33:20 dns1 named[13838]: adjusted limit on open files from 1024 to 1048576
[code]...
I need to know how to configure the address of the next level DNS server in my BIND server. im in a FEDORA 10 system.
View 3 Replies View RelatedI want to join standalone windows xp machine to Linux Domain (Redhat 9)..
View 3 Replies View RelatedI have two servers, one has an empty / and the other has a subdirectory with a large number (4 gig) with many, many files. I need a way to transfer the files en masse from the server with the large number of files to the one that is essentially blank.I don't have space on the used host to simply gzip all the files. I've googled this and see that there may be some combination of tar and/or gzip that will let me do this with some sort of redirection.
I really need and example line of how this can be accomplished. If my explanation seems rather sparse, I can supply more details.
I'm trying to ssh from my laptop to my desktop (both fedora 14) over a local network. I can ping my desktop and get responses, but if I ssh to it, I receive
ssh: connect to host 192.168.100.xxx port 22: No route to host
I can ssh from the desktop to itself.
HOW TO GET THE IP ADDRESS OF HOST IN LINUX WITH USING OF HOST AND NSLOOKUP COMMAND and after getting the ip address how to assign it in the variable
View 4 Replies View RelatedWill there be any issues installing and then subsequently running a Microsoft Windows Server 2008 R2 installation on a VirtualBox VM on a Linux host (Ubuntu 11.04 64-bit)? I require Windows Server 2008 R2 for a course I'm taking, and I dont have any systems to install/deploy it onto.
Host Machine Specs:
Ubuntu 11.04 64-bit
4GB RAM
350GB Disk Space
Nvidia Quadro system
I'm trying to setup DNS server. But i'm getting this strange problem.normally nslookup and workin for other sites.problem only with my local setup. can't see what i'm doing wrong.i've had setted up DNS server before but had no problems.can't see any solution on google.
So...
centos 5.6
bind 9.7 (from repository)
[code]...
I am still quite new to all this but I guess we were all beginners once, this forum seems very helpful.Here is my situation, I will give as much detail as I can.I have a dedicated server which is running CentOS release 5.5.Initially I had Plesk installed, but when I upgraded PHP I damaged the Plesk configuration, and so I installed Webmin instead.
All seems to be fine with this, apart from the DNS configuration / BIND server.I know this because I have one site which uses an external DNS server and this works fine (i.e I can access it from a browser). All the others don't resolve - i.e the ones I set up in Plesk.I've done a bit of investigating to see what is going on, but I'm stabbing in the dark a little.