I wanted to try KDE 4.3 on Fedora 11. I enabled the testing repos and updated. However after the update, I restarted and when I login, it takes me back to the login screen. I've tried to login with the gnome desktop and also as other users but it still took me back to the login screen.
View 1 RepliesClean install of 10.4 I select shutdown and it takes me back to the login screen. Trying to shutdown from that screen does the same.
View 9 Replies View RelatedRecently I've been having an issue where every now and then, all of a sudden fedora logs me out and takes me to the login screen.
All my unsaved work is lost and I have to log back in again.
Is there any way to diagnose this problem and figure out how to solve it?
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
I would like to post my problems here with Fedora 11 regarding that I am using Dell inspiron 1525, Dual core-N series. I have got two problems:
First;- After I updated my system, I have experienced a a login problem , which is each time I try to login and insert my password correctly it seems that it will login but it comes back to the same login screen as if I did not do anything, but after too many times it works.
Second: I read some posts in a website that talks about configuring the RPM fusion "Repo" and I did all the steps posted there , but after that whenever I try to update or download anything through terminal.... it appears the following:
[Code].....
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
So, I just installed Fedora yesterday. I have been trying out different Linux distros and Fedora was next after Ubuntu and SuSE failed severely. So, I installed F14 yesterday and everything has been great... until I tried to set my JAVA_HOME variable. I followed the instructions here.
After editing $ vi ~/.bash_profile as the site instructs, I proceeded to log-out and log back in...except I can't log back in. I have repeatedly gotten the login screen, selected my account, and entered my password. When I enter my password incorrectly, it says 'Validation Error' and that is not what is occurring. The display goes black for a couple of seconds and I am redirected back to the log in screen.
Starting today, when I click on shutdown, it takes me back to login scree instead of shutting down the computer.
From the login screen, if I press on shutdown on the bottom right, it will indeed shutdown !
Every account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies View RelatedThe graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
I have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix.
did :
CTRL + ALT + F1 switch to one virtual console
sudo service gdm stop
[Code]...
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
View 3 Replies View RelatedI have updated to FC11 a few months back and after I got my desktop effects going I notice that every time I go to my kde application launcher it takes me back to space 1. I could be in space 6 but as soon as I go to the application launcher to open a new application it takes me back to space 1 and I have to manually move the application to desktop 6. This only happens when compiz fusion is enable...
View 4 Replies View RelatedI did a clean install of xubuntu 9.10. I set up an account for my wife on it and now everytime I try to login under my own it keeps going back to the login screen. Sometimes twice last night I had to log in 4 times before it went to the desktop. I have played with some live CD's of ubuntu and xubuntu, but this is the first full install I have done. Before I set up the wife account, I could login first time. Should I try and reinstall and hope for the best or is there something in terminal that could be done?
View 8 Replies View RelatedThat's a picture of my ubuntu 9.1 64bit login screen. The background image I changed myself months after this problem started, so I'm sure that has nothing to do with it. What I DID do that caused this problem was follow the openoffice dark theme fix on this page:[URL]
BACKGROUND: I installed a dark theme that made the openoffice word page black, so I had to find a fix for it on the page above. I'm not using the theme anymore, but it was "Slickness black" on gnomelooks.
In case someone didn't see a problem with the orginal login screen, the section where you click the username and enter your password should look like this:
Also incase anyone was going to ask, my login DID look like the second picture at one point (before the openoffice fix) I just removed openoffice completely and reinstalled it so that isn't the solution.
My problem is basically that when I boot for the first time after a fresh installation and setup, I am always stuck at the login screen or thrown back to it. No matter what account I log onto, whether it's 'root' or any other user account I have setup, it would attempt logging in, black out the screen, turn my monitor off then on again and I'm back at the login screen. This is all using the graphical interface of course. I'm having this same problem with all the linux distributions that I've tried so far:
Gnome Sabayon Mandriva 2010-I've even tried changing all the different boot environments, and same problem Open Solaris and Ubuntu won't even install. It just sits at the loading screen. Why would this happen? I've tried all these OS's on my regular PC, which is a dual core, 4 gb of ram, and they've worked perfectly. So why wouldn't it run properly on that other PC?
First of all not sure if this is the correct forum but anyway.Ok well i installed this theme because i liked the look of windows 7 (http://gnome-look.org/content/show.p...content=113264).So i ran the GUIUninstall.sh and it seemed to work but the login screen still has the theme i was wondering how i could change it back to the defualt one.
View 2 Replies View Related1st Problem:The problem that I am having is for Ubuntu 10.10. When logging in for some reason it will:1. Login and play the Ubuntu login sound.2. Will start loading the desktop and panels.Right after #2 it goes black and kicks back to the login screen. I am not sure what to do since it constantly does this. It renders the computer useless if I cannot get passed the login page. Yes the username and password are correct.2nd Problem:Before this 1st problem occurred this has also been a problem that has not went away.When I used to be able to login to the desktop I have just the panel on the top of the screen with the traditional Ubuntu "start menu", "system", etc. For some reason the right side which is the other half of the panel will not load. The only solution which fixes it while I am on the current session is to right click the panel and click Minimize/Expand button which toggles to center the panel on the top of the screen. Now when I click Expand its like the problem never happend, but this only fixes it for that session.
View 9 Replies View RelatedI have Natty, and from time to time Computer goest back to login screen. Is there any reason for this?
View 4 Replies View RelatedI tried applying an emerald theme yesterday, and when I did, it somehow affected the login screen, now it looks old and crappy like win98. I tried disabling emerald and even uninstalling it, but the login screen remains crappy, how do I get it back to the way it was?
View 5 Replies View RelatedI had Kubuntu 10.04 installed, I screwed up a bunch of stuff in it and it would hang after the login screen. I reinstalled Kubuntu 10.10 (formatted the partition with Kubuntu on it) but I kept my /home partition in tact. NOw, when I log in, i starts to load, and then KICKS ME OUT, back into the log in screen. The user does exist, I can access the user from the console, but when I try to get into Kubuntu, it kicks me back out to login. What on earth is going on? I've tried failsafe mode as well as regular login. neither works.
View 2 Replies View RelatedWhen I start up my computer Xubuntu is asking me to login (which is strange as I have login disabled). Then, when I do enter my password, it is accepted and after a few screen changes I am returned to the login screen. (I know the password is correct as the login screen informs you immediately if you enter it incorrectly.) Also, I can see that my display settings have been changed--the monitor resolution is wrong--my cursor is way big as are buttons, text etc..
View 3 Replies View RelatedAround with my Login default screen and set my login to "Ubuntu (Safe Mode)". Now, it seems as if the system does not grant me the authority to change it back to another default login.
View 5 Replies View RelatedThe problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies View RelatedI have laptop with Mobility Radeon HD3200 graphics. Gnome 3 works more or less fine until I start Skype. When Skype is running switching between the windows is a pain in the a$$. The screen flickers, looks crappy, takes ages to refresh, etc. Anyone experience similar things? I also noticed that when I start yumex I also get the screen doing the same things as with Skype, but to a much lesser extent and only for a few seconds. Could it be related to the network connection? Running F15 64
View 4 Replies View Relatedok this is going to sound 1/2 retarded
i have a desktop that had had vista on it forever and i decided to install ubuntu on the 10gigs i had free for the longest time so i installed ubuntu but i did a stupid thing in my opinion and installed grubboot loader on the windows partition now when i try to boot vista it takes me back to the bootloader and i need to be able to use both vista(grphicswork) and ubuntu(networking) i cannot loose my vista files by re installing vista
I was writing a bash script which attached to another script. The issue I'm having is, when I use the exit command written in the script, it takes me back to the first script. How do I disable this?
View 1 Replies View RelatedI am using Xubuntu 10.10 64bit . When I press the quit or logoff buttons on the desktop it takes me to the logon screen and then at the bottom right corner it allows me to shutdown or reboot. I would like to bypass this screen entirely,and just shutdown reboot from the desktop. Only I use this machine at home ,no none else needs to log on. Is there any way to do this?
View 3 Replies View RelatedThis problem has been discussed a couple of times here and there and there are numerous solutions as well as unsolved stories. The topic says it all I think. I use ca(fr) layout, and in the gnome keyboard configuration (system, preferences, keyboard) I only leave Canada. When I log out and go back in, the layout changes to USA and in the configuration tool, theres canada AND usa. I have to delete USA every time. The file /etc/sysconfig/keyboard is already set to ca(fr) and doesn't change
I tried to delete:
rm -f /var/cache/gdm/your-username/.dmrc
rm -f ~/.dmrc
but I either did miss something or it didn't work. The only thing I observed is that if I set the keyboard layout to Ca(fr) at the login screen (which is always set back to USA), the layout stays to ca(fr) in my session. This problem did not occur on Fedora 11 and it began on 12 on my laptop as well as on my girlfriend's.
I've read somewhere and I forgot where, that it is a known bug in Gnome and that it is fixed in a later version. I applied all available updates and system/about this computer says I have Gnome 2.28.0 and if I recall, this bug is supposedly fixed in 2.28.4 but I may be wrong on the version number. This is very annoying as we try to turn our computers off when we don't use them but this reset every login kind of forces us to our previous bad habits.
I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram