Launching OpenOffice takes several minutes because it's trying to connect to the Internet. The problem gets worse in a dial-up connection. Turning off the Internet takes less than a second to start. How can I prevent OpenOffice from trying to access the Internet when it starts?
View 2 RepliesI'll spare the details, but is there a way to use iptables to do the following:
Allow all port 80 traffic to work for squid, yum ,etc. but prevent firefox from talking to port 80?
(That way if they don't use squid proxy, it won't work)
I'm doing a research to protect my pc from physical access. What I'm facing here is that my company created a program for fedora 8 and plans to sell the unit away. We created a function where you can configure the program using any web browser from a network so we do not want anybody to have access to the fedora except for out personnel.
Based on my research, I've found [URL] this guide to protect people from accessing grub and single user. I am currently researching on preventing others to clone the harddisk. I would like to know if there are any other methods to prevent people from unauthorized access to fedora.
UBUNTU 10.04.1 LTS
AMD64
Is there any way I can prevent OpenOffice automatically installing when using the Alternate disc? I want to install a different package (LibreOffice 3.3) without having to uninstall Ubuntu's OpenOffice.
i need office 2007 to complete school work as openoffice doesnt support access databases. i switched to linux as i didnt have my recovery discs for windows and wanted to start afresh. my problem is that i have got word,excel,powerpoint & publisher working but access just wont load. i click the logo and it does say starting access on the bottom taskbar but then it disapears and nothing happens. ive tried google and havnt really found a answer im running ubuntu 10.10 and i have wine installed This is kind of urgent as i have a deadline fast aproaching and need access at home to progress in work
View 3 Replies View RelatedI have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
I'm trying to install a language-pack for my OpenOffice, but there seems to be a dependency-problem. Maybe someone has a suggestion. FC12, x64 OOo.x64 3.1.1
Code:
[root@sarah yum.repos.d]# yum install openoffice.org-langpack-de
Loaded plugins: fastestmirror, presto, refresh-packagekit, remove-with-leaves
Loading mirror speeds from cached hostfile
* fedora: ftp.astral.ro
* livna: rpm.livna.org
[Code]...
I have a users, that log in from a terminal. They should not have any shell access, so currently their login script, at the end, starts the program that they use, and after that program ends, the login script moves on to log them back out. The problem is, they could press ctrl+c, while the login script is running, and it quits the login script and spits them out at a shell prompt. -- Is there any way I can prevent this?
View 4 Replies View RelatedHow can I prevent a certain application from having access to ALSA. It keeps stealing my audio.
View 2 Replies View RelatedI'm using some software that using mount point such as truecrypt. I also mount shared folder on other machine (fileserver) and publish it using ftp. The problem is when the truecrypt volume dismounted or the shared folder mount point loosing connection to the fileserver, user can write to the mount point without knowing that they actually not writing to the truecrypt volume or to the shared folder.
My question is, when sometime the server reboot and truecrypt volume is not mounted yet, how to prevent write to the mount point? I dont run truecrypt mount automatically for security reason.Some question for shared folder, if fileserver restart and the shared folder mount point got disconnected, how to prevent write to the mount point?
Fedora 15 latest updatesHP Mini 210 NetbookMy internet was working fine. Then all of a sudden it stopped working on my Fedora netbook. I also have an iMac and can connect that to the internet without any problem. So my Internet connection is working fine on the iMacHowever, when I put the cable in my Fedora netbook. I get the IP address through DHCP and DNS automatically. This is the same setting as my iMac. I also have a windows partition on my Fedora netbook. That works fine, so there is no hardware problems.I can ping the router ok. But cannot pingor browse any wReturns cannot find host name google.com. So I think there is something wrong with the DNS.resolv.conf doens't have any DNS address in there. As there are assigned using DHCP.
View 2 Replies View Relatededora 15 latest updates
HP Mini 210 Netbook
My internet was working fine. Then all of a sudden it stopped working on my Fedora netbook. I also have an iMac and can connect that to the internet without any problem. So my Internet connection is working fine on the iMac However, when I put the cable in my Fedora netbook. I get the IP address through DHCP and DNS automatically. This is the same setting as my iMac. I also have a windows partition on my Fedora netbook. That works fine, so there is no hardware problems.I can ping the router ok. But cannot ping [URL] or browse any websites.nslookup [URL]. Returns cannot find host name [URL]. So I think there is something wrong with the DNS.resolv.conf doens't have any DNS address in there. As there are assigned using DHCP.
I'm working on creating a bootable Linux CD to distribute a sandbox environment to customers that will work on multiple PCs.One requirement of this environment is that we do not want the user to have any access to the underlying hard drives in the computer to prevent any accidental and/or malicious damage. I can prevent the disks from automounting with a few udev custom rules, but is there any way to prevent/block the user from manually mounting the hard drives after boot up.
View 2 Replies View RelatedI would like to use my laptop at home, where I don't have internet access (don't ask, long story). My question are two-fold;
** How do I prevent various pieces of software trying to access the net for updates etc. I presume they are likely to hang, lock up, and generally cause trouble.
** Can anyone recommend a working practice for installing updates and/or new software, either from USB or CDROM/DVD? I have good (legitimate!) access to assorted computer facilities at my office. I am using 11.04
I had a duplicate IP from another device on the network that would jut not let it go and was the same IP as my Fedora box that was working fine. After screwing around with the other device I finally just gave up and changed the IP on the Fedora box. Now I can't access the internet at all from the Fedora box. I looked in my routing tables in my router and the mac was showing as the mac of the other device. After some reboots here and there that is fix and the routers routing tables are now showing correctly. The Fedora box still can not resolve any domains or get online. Is there something somewhere inside the Fedora box that is still jacked up from the duplicate IP?
View 9 Replies View RelatedI just installed Fedora64 12 on my laptop. When I tried the Live CD all wen well. Now that I am running the full version I can only access internet pages linked to fedoraproject.org...?? not other pages work like google or yahoo or anything else. This is bizarre. How can I get access to the full internet?
View 9 Replies View RelatedI don't have any connection issues, but Firefox always starts in offline mode. I can uncheck it and everything works fine. If I close and reopen it Firefox switches back to offline mode.
View 4 Replies View RelatedI have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.
View 4 Replies View RelatedI have installed fedora 11 64 bit on a new computer. I have no problems accessing the computers on my local network, but can not get past the gateway. The gateway is running windows XP with IP address 192.168.0.1 and is named "internet". When I boot the new computer in windows, there is no problem. Here is the output of some commands I saw in other posts with similar problems:
$ /sbin/ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:24:8C:7F:10:0C
inet addr:192.168.0.245 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::224:8cff:fe7f:100c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
Firewall disabled.Static IP addys given to each laptop, but makes no diff when dhcp derived IP addys.using wlan Cannot ping either laptop from a windows box, bit windows box pings other computers.Can access internet from either laptop and Samba works too.I can ping one laptop if I plug the LAN wire into it. In fact I can ping either the wlan IP addy or the LAN addy this way. WHen I remove the Lan wire I can still ping the wlan on the laptop, but restarting screws it all up again.I see that iptables and other files change when I plug the LAN cvable in and then remove it again.
View 1 Replies View RelatedIn Fedora 12 how do I make it so a specific program can't talk to the internet?
View 14 Replies View RelatedI installed Fedora 13 on my laptop today after deleting a badly screwed up Windows XP partition. Everything installed smoothly even my Broadcom drivers but I can't seem to figure out how to get Firefox to access the web with a URL.
I can ping Google, and can get to it in Firefox if I use the IP address from the ping, but going to [url] in Firefox will give me an error message about not being able to find the server at the web address. I was also able to update from the terminal with yum update just fine. I've tried searching Google for some answers, and maybe I just can't phrase my query right, but I found nothing that I could use to try and fix my problem.
I've attached a HardInfo report which I hope could be useful if you need to know what my hardware is (an HP Pavilion zv5000 laptop).
I've installed Fedora 13 on a Toshiba Satellite A40 laptop, and am trying to get the wired ethernet connection to work. Network Manager says it is connected, and the connection details (DHCP assigned IP, gateway, dns servers) all seem correct. However, I cannot browse the internet. Checking for updates fails also. I have tried pinging various sites and the results are inconsistent - sometimes it works, sometimes it times out with "unknown host". [URL]... I've searched around for similar issues and tried disbaling ipv6 both in Fedora and Firefox, but this doesn't help either.
View 10 Replies View Relatedhttp://kernel.org/pub/linux/kernel/p...d-AR8152.patch
I have zero internet access on my laptop via wired or wireless connection, and need to apply this patch, but have pretty much no idea where to start.Running vanilla FC13 x86_64. Whats the easiest way to go about this, considering its hard work for me to download packages and their dependencies at college (where I am posting from now) and installing them at home, it could take days.
I just installed fedora on a customers laptop of mine and just trying to get everything working. I hooked up a wireless PCMCIA linksys card and got connected to my wireless and went through the first 250+ updates, all that went fine, so I know I am getting internet access. Everytime I open firefox though I cannot connect to any websites, like I said I am a noob so my troubleshooting skills are very limited with linux, anything I can try etc.
View 4 Replies View RelatedAfter upgrading to F14 from F10, we seem to have access to the internet from our console, and no one is able to connect to server as well. We have static IP from comcast. And all the configurations on the eth0 looks fine. We are able to browse, if we set the server to dynamic ip. Also, we are able to connect another PC (laptop) with the static ip configuration, and browse fine. Read through many messages on this forum, cant get any clues,
View 3 Replies View RelatedI have a work network of about 20 boxes most of which are running Windows 7 and one of them is a file server using linux and another is Windows server 2003. Now the local IP is distributed by the router, and no regulation of internet access is done by any of the servers.What I need to do is restrict internet access to select domains, which would probably need DHCP through linux(I think, not really sure), and I need something simple like a 'blabla.conf' file with the allowed websites that I can edit. need to know how to regulate IP addresses through the linux box (all details if possible, I never tried to do that before), and how to restrict internet access also through linux.
View 4 Replies View Relatedi was installing openoffice from internet using yum command on rhel 5 but it was not working properly. how i can install openoffice using yum command on rhel 5. it is confirmed that i m connected with internet.
View 5 Replies View RelatedEverywhere I read, this seems to come up as a very difficult thing. Just want to record how I did it.
In Access, export the table to an Excel Spreadsheet. Using Openoffice, open the Spreadsheet, but save as an Openoffice (.ods) spreadsheet. ( Note - According to the Base help files, if you import an Excel Spreadsheet, it is read-only)
Open Base and Create a database. No tables, no nothing, just create. Now Open this and and also Open the spreadsheet. Select all the data in the spreadsheet, 'copy' it, and in the Database tables area, 'paste' it. I had problems in that it wanted to create a primary key, so added an extra field.
I then went into the database design view, right click on the appropriate field to make that the primary key, and remove the primary key from the unwanted field.
Delete the excess column. This is just for a single flat table, with no linking to other tables. I hope that this helps someone. I did it for a membership database table, and have been able to replicate the query to filter for the Snailmail folks (Those that did not have an email address in the table). Still trying to figure out how to do an envelopes report though.
I installed OOo on Slackware linux 13.1 recently. It worked fine until yesterday when I tried to open up an xls file which I often use, and I was presented with a "filter" dialogue with loads of options but no explanation what they were for. I tried several of them but nothing seemed to make any difference - the file was unopenable. I found a suggestion online that I should try to delete my configuration file ~/.openoffice, which I did. Unfortunately now whenever I open OOo I get a smaller dialogue box with some gibberish in it. It's some crazy wingdings font or something, and I have no idea what it's trying to tell me.
Anyway now I can't access any of my files. I have tried reinstalling OOo and deleting my config file again, neither does anything - i'm always getting the nonsense dialogue box. I have even installed OOo on a virtual WinXP and the same happened there (the 'filter' dialogue not the gibberish font)Has OOo somehow managed to corrupt ALL my files?