Fedora :: Install Anything; The Package Manager Is Having Trouble Contacting The Source?
May 25, 2011
I first installed Fedora 15 (full clean install) on a spare laptop I had sitting around and the install went flawlessly. I was able to install it and use it right out the gate. I was then able to install two of my must-have programs, xchat and libreoffice without any problems either.Then I tried the same thing on my primary desktop at work (and since I run an IT department, I already have permission to do this :-)
The problem I'm getting is trying to install anything;the package manager is having trouble contacting the source.The exact error reads: "Software source download failed. Could not contact source 'fedora', so it will be disabled."I have not made anychanges to the firewall on the machine and the machine does have a working internet connection (I am posting from the machine). Any tips or advice on ways to troubleshoot would be great. I'm by no means a linux expert, but I can get around the system fairly well
View 4 Replies
ADVERTISEMENT
Feb 19, 2010
installed the fedora 12, but dont know how to use the source dvd to install the source package.
View 3 Replies
View Related
Dec 27, 2009
i am trying to compile netgear wgr614l sources.i am using fedora 11 [leonidas] for compilation. system core is 2.6.29.4-167.fc11.i686.PAE.
View 12 Replies
View Related
Jun 12, 2010
[root@sharpblade ~]# yum repolist enabled
Loaded plugins: presto, refresh-packagekit
repo id repo name status
fedora Fedora 13 - x86_64 20,840
fedora-source Fedora 13 - Source 0
updates Fedora 13 - x86_64 - Updates 2,736
repolist: 23,576
why status of fedora-source is 0, dose this means there's no available packages in this repo? kernel-headers and kernel-devel have been installed, how can i install the kernel-source package?
View 1 Replies
View Related
Mar 15, 2010
What package do I have to install to build packages from sources? I am trying to build the TrueCrypt package from source.
View 1 Replies
View Related
May 4, 2011
I recently got an iPhone 3g and have been trying to upload music onto my device with Rhythmbox because my computer exclusively runs Ubuntu (10.04 LTS, Lucid Lynx). Rhythmbox would show files that were dragged and dropped as being on the iPhone, and they appeared in the iPhone's folders, but they weren't recognized in the iPod player. I followed a variety of forum threads to try to fix the problem, but ended up creating a whole new set of problems with my package manager.
I get this error message before package manager opens: E: Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/pmcenery-ppa-lucid.list E: The list of sources could not be read. Go to the repository dialog to correct the problem. E: _cache->open() failed, please report.
And this message after I close the first error message window and the package manager opens: An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message:
'E:Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/pmcenery-ppa-lucid.list, E:The list of sources could not be read.' Does anyone have any recommendations on how to fix this? If it isn't already apparent, I am very inexperienced working with ubuntu, so the more detailed the response, the better.
View 9 Replies
View Related
Nov 24, 2009
Ive been using linux for a few months now and every now and again i come accross a program that doesnt have a rpm package but says that it can be installed on Fedora using source. I'm familiar with build essentials and the following commands:-
tar xzvf package.tar.gz
cd package
./configure
make
make install
but from what i have read fedora uses a differnet compiler. I'm trying to install Buddi budget manager and the ./configure command doesnt work, which im guessing is because it doesnt have a configure file? Can anyone confirm how to compile from source and whether there are any tutorials specific to fedora.
View 4 Replies
View Related
Aug 23, 2010
I would like to install Password Gorilla but I cannot find it in the package manager, is it available in F12? It may be that I need to install another repository but I do not know which one, as far as I'm aware I have all of the 'standard' ones.
View 6 Replies
View Related
Mar 15, 2011
I am just starting to use fedora as I'm on compsoc committee at my uni, and need to be able to use the server which runs it. Am trying to get a mumble server running (just on my laptop with a fedora 14 install) And am really struggling, can't get the stuff manually and do it, as it says it depends on some other packages which I can't find in the package manager, and if I just use the murmur package in the manager, then it doesn't seem to install, and even if it does, if I try to run it, it says the database is not writeable
[URL]
View 14 Replies
View Related
Oct 2, 2010
I want to install CmapTools in my desktop, which runs v.10.04. I have downloaded the .bin file from their site.Is there a way to install it using Synaptic Package Manager?
View 2 Replies
View Related
Jan 10, 2011
where i can find drivers for my pc.. and i want to install many application -- everyone said that i should use "PACKAGE MANAGER",i dont know how to use it.
View 14 Replies
View Related
Apr 6, 2011
I wanted to fix something in the Kate editor. So instead of downloading it from it's website (Get It! - Kate | Get an Edge in Editing) I wanted to download the "openSUSE Kate" source package. But as you can see, there is no source package available. I tested it with source installation of "zypper" (zypper si zypper) and it worked.Any ideas? Is the kate source code in another package?
View 4 Replies
View Related
Dec 12, 2015
I'm installing xfce4-volumed-pulse 0.2.0-4. [URL] .....
Getting the error:
Code: Select allThe required package keybinder was not found on your system.
*** Please install keybinder (atleast version 0.2.2) or adjust
*** the PKG_CONFIG_PATH environment variable if you
*** installed the package in a nonstandard prefix so that
*** pkg-config is able to find it.
I have installed everything available in the jessie repo with "keybinder" in the name. It seems like my path variable is configured correctly:
Code: Select allpkg-config --variable pc_path pkg-config gives me:
Code: Select all/usr/local/lib/x86_64-linux-gnu/pkgconfig:/usr/local/lib/pkgconfig:/usr/local/share/pkgconfig:/usr/lib/x86_64-linux-gnu/pkgconfig:/usr/lib/pkgconfig:/usr/share/pkgconfig
and (leaving out doc files and such) locate libkeybinder gives me
Code: Select all/usr/lib/libkeybinder.so.0
/usr/lib/libkeybinder.so.0.1.0
/usr/lib/x86_64-linux-gnu/libkeybinder-3.0.so.0
/usr/lib/x86_64-linux-gnu/libkeybinder-3.0.so.0.0.0
So I can't figure out how to get keybinder recognized.
View 2 Replies
View Related
Apr 26, 2010
I want to pick up Python3 from squeeze, meanwhile I would like to stay with lenny with all other packages. Is this possible by just modifying source.list file?
View 2 Replies
View Related
Mar 3, 2011
I was a die hard Ubuntu user for the last 2 years and decided to use something more advanced or different. My question (after searching the crap out of Google) is how can I view the source code of Fedora? I have found many sites explaining this but it is not written in terms that are easy for me to understand. I haven't been programming for years and using advanced features in Linux so most of these sites are not explaining out and most are explaining how to build and add on to the kernel.
View 4 Replies
View Related
Sep 21, 2010
I have a small touchscreen tablet here that's running a cut down version of ubuntu (I think 9.04). It has its own flash gui and no mention of ubuntu on it anywhere (but I know 100% that it is). Anyway, its so cut down it doesn't even have things like apt-get, any file sharing capabilities and it cannot run .deb files. I can only do things to the filesystem via ssh not using the gui. Its running a busybox shell which is also very limited.
I would ideally like to be able to connect to some nfs shares on my ubuntu server with this thing but im having no luck. I have found out its because it doesnt have nfs-common or portmap installed (apparent dependencies). How would I go about manually installing something like that? I need to be pointed in the right direction as atm. I am not too sure. Baring in mind I cannot simply use apt-get or unpack a .deb file.
View 3 Replies
View Related
Nov 24, 2010
I currently have ubuntu with NO gui what so ever. And I was wondering if I install the x-window-system-core + kde not the kubuntu desktop will I still need to install KDM as well as a package manager? Or would I just be better off installing the kubuntu desktop?
View 2 Replies
View Related
Dec 10, 2009
Looking for source code packages I have configured the "Main repository (Sources)" into the yast list of repositories. However when I select the repository view in th esoftware manager it shows this repository as empty. Other repositories work. I have checked the link to the repository to be valid. I have added it automatically from the "Community repositories".
View 9 Replies
View Related
Mar 10, 2010
I am trying to access my package manager. However it tells me that is unable to access it. Is there a fix for this?
View 5 Replies
View Related
Sep 6, 2010
I just installed 32-bit CentOS 5.5 in a Vmware virtual machine. I'm unable to install RPMs from either the graphical U/I (Pirut) or CLI (Yum). Pirut stops responding (no screen repainting) after displaying the "Updating software" dialog; Yum gets to the display of "Running Transaction" where it hangs. The initial installation (from the net-install ISO) obviously succeeded, and the after-install update of about 50 packages also worked fine.
yum.log contains nothing past the entries made during the initial install. Because I had a problem with corrupted files from a mirror during installation I tried using the baseurl setting in CentOS-Base.repo instead of mirrorlist, but that had no effect.
View 9 Replies
View Related
May 17, 2010
Using 11.0 64bit OpenSuse. I was updating this workstation. Everything was working good. I rebooted from the last set of updates and now I am trying to access the Package Manager from yast, but it is not working now. It starts up, then it goes to an "Initializing", then a popup says that "Accessing the Package Manager Failed". It also notes that something else is using the package manager, then gives me choice to either continue or retry.
View 3 Replies
View Related
Jan 5, 2010
In a moment of temporary insanity I tried to install Backuppc using the synaptic package manager, but started to panic when the installer tried to set up an Apache web server on my PC (which I do not want). At that point I tried to cancel the installation, but got an error message. I then marked the package for complete removal in the package manager, but every time I click the apply I get an error message, "E: backuppc: subprocess pre-removal script returned error exit status 2" and the package, which did not install correctly in the first place, refuses to go. When I ran the update manager today, to install the latest updates, the manager tried to continue with the Apache installation stage of the Backuppc installation. How do I get rid of it?
View 2 Replies
View Related
Jan 29, 2010
Every time when I click on reload button in synaptic package manager I get these messages:
W: Failed to fetch http://in.archive.ubuntu.com/ubuntu/...ty/Release.gpg Could not resolve '1@192.168.0.4'
my internet connection has http proxy with address 192.168.0.4 and port no. 3128. every time when i click on reload button in synaptic package manager i get a lot of above messages. btw i am using ubuntu 9.04.
View 1 Replies
View Related
Apr 4, 2011
I'm getting the following error every time i run the package manager to install or update etc..
Code:
E: nxserver: subprocess installed post-installation script returned error exit status 1
Despite the error, apt still works and allows me to install/remove apps.
The application in question also works fine too.
View 2 Replies
View Related
Mar 12, 2010
i just got debian lenny installed on my machine, i cant get flash to work with iceweasell so i thought id try and install firefox but i cant seem to find it anywhere in the debian package manager, ive tried usign the following guides;[URL]i still havent been able to achive my goal
View 8 Replies
View Related
Jan 29, 2010
I just installed ubuntu 9 and I went to package manager to install aircrack-ng version 1:1.0-1 and it says that it has installed but then when i go to applications/internet/aircrack is not shown.
View 1 Replies
View Related
Mar 12, 2010
i can't install network-manager-pptp package with offline.i get this package from Code:http://packages.ubuntu.com/karmic/i386/network-manager-pptp/downloadJust now i use ubuntu9.10.
View 3 Replies
View Related
Nov 19, 2009
I'm new to Fedora, having used mainly Ubuntu in the past. My biggest (and pretty much only big) problem so far is that I can't find a good enough gui frontend for yum. I really hate packagekit because it doesn't really give any info; it simply says "downloading" and "installing packages" without saying what exactly it's downloading, where from, what's the speed (how will I know if my connection's stalling?), how big the file is etc.
I like yumex, but every time I open it I have to wait 3+ minutes for it to reload the repositories. And if I don't reload them then I can't install anything. Also, when I'm done installing it has to reload the repositories once more if I want to keep using it.
Then I also tried synaptic, which (of course) works as well as I'm used to, but some important repositories for Fedora (like RPMfusion) aren't accessible through APT.
Another problem with any non-packagekit managers I tried was also that they don't communicate with the system's notifier, so after installing/updating a package through anything else than packagekit that needs me to restart the computer or a program I get no notice of it. Is there a package manager that would work the way I want it to, or should I just make a choice between using console, using the overly simplistic (in nice terms) packagekit and waiting several minutes before making changes to the installed packages? I'd be glad for any input here.
View 2 Replies
View Related
Nov 20, 2009
Where is it?Cant find vlc in package manager?
View 2 Replies
View Related
Feb 13, 2010
I am relatively new convert from ubuntu/debian here and while I like yum's interface in the terminal better than aptitude, I regularly find myself frustrated with gpk-application. When I try using it to search for packages, as often as not it will not return any results--even though I know it should return some. Furthermore, there is no ability to define what fields you are search (package name, description, etc.) Another thing that really bothers me is how when it is downloading/installing packages, all you get is the little bar and a message saying "resolving dependencies", or "downloading", or "installing" etc.
With no option for more details (or preferably a terminal display). While I usually use the terminal by default for package manager, I had got used to using synaptic package manager in ubuntu and debian for searching for packages, when I wasn't exactly certain what the name was of the package I needed. I know I can do this from the terminal, or even on the internet, but I found synaptic was great for quick investigations. Is there any rpm package manager closer to synaptic in terms of functionality? or am I stuck with gpk?
View 4 Replies
View Related