how I should edit the boot loader so that both WinXP & Fedora are bootable selection options on the boot splash screen. My apologies if this has been asked before. My present grub.cof reads as follows but does not provide me with an XP boot option.
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
[dalpets@localhost ~]$ su
[code]....
I have now Bt4 on live envir. and i am about to make space for Bt4 using Gparted from Bt ( live env) 'resize & move' at Free space preceding & Free space following on a 500Gb drive,I gave it 101 MiB. I see it says MiB instead of Gb .. but i am confused as to before & after does the before mean actual space fedora will have or is it Mb space for the bootloader a 100Mb or is that 10Gb ?
View 2 Replies View RelatedI was using Fedora 14 without any other OS installed. That was until i realised i need After Effects because AE 6.5 under wine does not cover my needs.
I installed win XP. Everything's OK so far. Next step, installed Fedora 14. Also, it went OK. I reboot`d the system and i was presented the "mini-shell GRUB Bootloader terminal". Since i don't know anything about GRUB nor i am an HDD Expert i did nothing. But, i used the "System Rescue CD" and chose the "Boot an existing LINUX 32-bit OS". Fedora did load and i'm writing this post from within fedora. The setup i used during Fedora installation is the following.
Code:
When i was presented with the bootloader options i chose to "install bootloader on first sector of boot partition" (something like this i don't remember it) and i did NOT choose "install on MBR" (again i dont remember the exact phrase).
The HDD partitions i created have these properties according to "disk utility".
I am using a Macbook Pro 5,5 , and I want to have Fedora and OS X dual boot. I have created free space using the disk utility from the Snow Leopard install CD. I now have 50 GBytes of free unformatted and unallocated space. So I enter the 64 bit Live CD of Fedora 14 inside, and it works flawlessly in boot. I click on "Install to Hard Drive" option and then of all the installation options I select the "Use Free Space" one. I then use the default settings:
It creates a 500M boot partition (/dev/sda3) and an LVM partition (/dev/sda4). ext4 and swap are allocated by default into the LVM Volume Groups. It then asks me for the location to install the boot loader providing me with 2 options: In the Master Boot Record (MBR - /dev/sda) or in the first sector of the boot partition (/dev/sda3). I go with the second option.
Installation proceeds as planned. While rebooting, I enter OS X and I install rEFIt. In the rEFIt menu, I select the Linux icon, which results in a black screen saying that "no bootable device" or something like that. I restart my Mac, and then select the rEFIt partitioning tool that says that my MBR needs to be updated. I let it sync my MBR, and I restart the computer. I click on the Linux icon again, and then I am presented with the penguin logo on a gray background... and that's about it.
I can't do anything from there. No system is booting, nothing is loading. Booting to my OS X partition works just fine, but Fedora refuses to boot. It is stuck in this logo screen.
I am severely confused when it comes to partitioning. I have Fedora 11 on a liveCD now. I first tried to install that on to my Acer Aspire 1 netbook alongside another distro, but that failed due to my lack of partitioning knowledge. (It needed a /root device to install in I think).
Well, I would LOVE to have Fedora 11 with Vista (on my main laptop rig - acer aspire 7520) when I go back to college next week (go hokies). But I need Vista for work with my lab applications that uses windows. Can someone please provide me a noob-proof method to install Fedora without corrupting Vista? I really need Vista, but I really enjoy linux.
I tried to dual boot Windows 7 and Fedora 11 following the instructions in the link at the bottom of this post. Now fedora boots great, but when it tries to boot 7 i get the message "Disk Read Error Hit Ctrl+Alt+Del To Restart" is there anyway to fix this with out reformatting?[URL]..
View 6 Replies View RelatedWhat I'm running:
Acer 4810t
intel centrino dual core 1.40
4 gb ram
320 HD
Vista home premium 64 bit
1. what do I need to do this I have a program to make a new partition already what I need is to know what is the best boot selector to use I'm thinking of buying VistaBootPro will that work well?
I'm trying to find a simple solution to dual-boot Fedora 11 onto Vista Home Basic Edition, using the live disk as the installation media, but I can't find one anywhere. Maybe you could point me in the right direction... (But first let me explain that I am a newbie when it comes to Linux.)
So, my computer specs are...
Make/Model: Dell Inspiron 1525
Processor: Pentium Dual-Core CPU T4200
i had recently installed fedora 12 in a system running debian lenny in (hd0,0), its grub is installed in mbr and the grub of fedora is installed in the installation partition of fedora .I defined a separate partition /boot for debian but for fedora i used the available space for boot swap and /. i booted with live cd to copy the grub.conf of the fedora to add it into menu.lst of debian but i have got "error 15 : file not found".
[Code]...
After recently looking around the Linux world, I decided that I would also like to try fedora. Primarily because of the BTRFS file system that I would like to try out while still having Ubuntu as my main OS. Normally, I'd just partition as usual as I would with any of my other OSs, however this is the first time I have tried to dual boot two Linux installs on two different file systems. Does anybody have a better method of going about this? Or to just go about it as usual and install on two different partitions? Also, I do not want to wipe the data from the computer as it is now. I have it all backed up, but I don't really want to go through the hassle.
View 4 Replies View RelatedI'm having trouble dual booting Windows 7 Ultimate and Fedora 14. I am using Grub 0.97 (The grub before Grub 2). I installed Windows 7 after installing Fedora 14 so the damn Windows BL covered up Grub. But I can't get into either Windows or Fedora. I get an Error 17: Cannot Mount Selected Partition. And the system can't find the BL for Windows so it always tells me to restart. And I have both OS' on the same hard disk.
View 14 Replies View RelatedI had a fresh copy of Windows Vista installed (original from the factory)- and I followed a document of dual booting - however I think I did some mistake or automatic skip of install Grub boot loader-
Now my fedora 11 is running smoothly but windows vista is gone or does not boot - I don't have any boot disks- they give examples having floppy disk a boot disk- my laptop doesn't have floppy drive- I guess I could manage in cd or flash drive.
I see my computer's config in fedora desktop as
computer:///250%20GB%20ATA%20WDC%20WD2500BEVS-6.drive
computer:///250%20GB%20ATA%20WDC%20WD2500BEVS-6-1.drive
computer:///PIONEER%20DVDRW%20%20DR-KD08HB.drive
computer:///root.link
I noticed that the partition NTFS still exists and it has not been erased. I did install linux on hda5 since hda1 was partitioned with NTFS
Is there any manual and precaution to be taken while doing the same dual boot system ?
Or is it possible to have dual boot with the present config- although i am ready to install fresh window vista and fedora as my dual booting systems...
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running)
2. Boot from disk and install in Windows partition with bootloader on installed on the / partition
3. Install, reboot, and resync the MBR using rEFIt partitioning tool
4. Shut down the computer and start up on the parition you installed linux on
Now I get a grub error code...
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
I'm trying to achieve my dream (but indeed not perfect) boot scenario: dual-boot OpenSUSE and Fedora with shared /boot, /home and SWAP partitions. First I installed OpenSUSE (sda3 on my layout below) with separate /boot (sda2), /home (sda5, encrypted) and SWAP (sda6), next I installed Fedora on /dev/sda1, and pointed it to mount sda2, sda5, sda6 with respective mount points, without formatting. I proceeded with the installation without installing new GRUB bootloader (overwriting an existing one).
It was successfull and now I'm back in OpenSuSE trying to edit menu.lst file (under /boot/grub) to make GRUB boot Fedora.
I attached a copy of menu.lst I cooked up for now. OK, it's a mess. Life would be allot easier if I didn't have a separate /boot partition, as I could just chainload, but it's no longer possible (or is it?). May be I needed to specify the resume device or problem is in initrd? below are the contents of /boot:
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
i have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
View 7 Replies View RelatedAlright so I am trying to setup a dualboot with desbian on windows 8.1. I have it installed on a usb using Unet, got secure startup disabled as well as fast startup, and I have USB first on the boot menu, but when I restart it just loads as normal and doesn't boot up the usb.
View 10 Replies View RelatedI am trying to dual boot xp and ubuntu 10.10 desktop. Everything in 32 bit. I have xp installed now and created a bootable usb with ubuntu and am trying it out now. i press install and then select my language. I then select install updates and third party software. I then get to a screen with 2 option erase disk and use that or specify partitions manually. I want the option that says install side by side, but it is not there.
View 9 Replies View RelatedI've recently bought the Samsung N110 netbook - it comes pre-installed with Windows XP, but I've decided to run Linux on it.
The decision is this - remove Windows XP and have Linux as the sole OS, or keep Windows XP and use dual booting?
I will mainly be needing this for working at school, or general internet use when I don't have access to my desktop at home. Therefore, I think it's unlikely that I'll need highly specialist software that can only run on Windows. Also, Windows takes up a fair amount of space - could dual booting slow the netbook down?
Having been pestered by the local nerds and read up on a lot of the material on the web, I'm pretty convinced that Linux is a good choice for me on this netbook. That said, I may well run a trial anyway before I switch. So, is there any reason to keep Windows XP or should I ditch the pre-installed OS and go with Linux all the way?
how to dual boot off of a usb. I am trying to learn to do them manually. What i do know is that i need a GRUB, and a splash screen of chuck norris., 2 ISO's, my usb is 16 GB FAT 32, grubbed up.
View 1 Replies View RelatedWhen I installed 32-bit linux first, and later when I installed 64-bit linux on a different partition.. then the computer wouldn't boot either linux properly..I'd like to hear from people who installed both 32-bit , 64-bit redhat linux successfully.
View 9 Replies View RelatedUntil very recently I was running Ubuntu 9.10 (Karmic Koala) installed on a 20 GB hard disk and Windows XP (SP3) installed on RAID 1 array of 2 x 250 GB disks, very happily along side each other and using GRUB as the bootloader installed on the smaller 20 GB drive.
I have decided to upgrade to Windows 7, and was struggling with the installation failing with the seemingly quite common "Setup was unable to create a new system partition or locate and existing partition" error. Google seaching suggested unplugging my Ubuntu drive and then installing Win 7. This worked fine with the Ubuntu drive unplugged, however with the 20 GB plugged back in I can boot to GRUB, but it still has XP in the menu, and no option for Win 7.
I think I could get around the issue by re-installing Ubuntu, which would place GRUB on the MBR which is now on the 250 GB RAID 1 array, but I would rather have the system as it was before with GRUB and Ubuntu on the 20 GB drive.
I know I need to edit GRUB to remove the XP entry from the menu, but I have no idea how I would get Win 7 into GRUB, and what to do about the MBR which Win 7 put onto the RAID 1 array.
I got the Eee PC 1215n specifically because it was cheap, good on battery life, and came with Windows 7 Home Premium. My old laptop, which recently died, had just Ubuntu on it, and I had few complaints. However, there were those few times that I really wanted the ability to switch to Windows.
I'm running the Live ISO from USB, and I'm at the partition manager section of the install. In the past, I remember there being an option where Ubuntu would specifically keep your old OS and settings intact, and you would just resize Ubuntu to the size that you needed it. However, my only options right now are to either use the entire disc or partition it manually, which I'm not as comfortable with since I don't know if I'll be able to get this computer back to the way it was before without having a disc drive, an install disc for Windows 7, and a serial key. The partition table reads as such:
/dev/sda1, Windows 7 (loader), 107.4 GB
/dev/sda2, Windows Vista (loader), 16.1 GB
/dev/sda3, [no label], 126.6 GB
/dev/sda4, [no label, but I assume this is the boot sector or something], 21.2 MB
I consider myself to be rather tech savvy (senior computer science major), but I can't exactly just dive in and re-partition my drive not knowing what anything is. If I had to guess though, I'd assume that sda3 is the main storage partition, and that would be the one that I could resize, and then I could install Ubuntu on the 30 or so GB that I free up there. Could I get some other input on this before I risk messing with my system? I don't want to brick this little laptop, but Ubuntu is so much more energy efficient than Windows (not to mention running on a more organized infrastructure and interface) that I'd really like to get it installed.
I am trying to dual boot ubuntu netbook edition along with xp but i get stuck at setting up the partitions. at the installation i have the option of installing alongside xp however when they show the graph it looks like they want me to share ubuntu on C:/ drive so that xp gets 60Gb and ubuntu gets 20Gb. What i would like to do is keep xp on the C:/ drive and install ubuntu on the D:/ drive so that windows and ubuntu each get 80GB.
What i have done so far is go into gparted and delete the D:/ drive so i have now 80Gb of unallocated space. however when i start the installation process and choose "install alongside other OS" it still chooses to share it with my C:/ drive. i would like to be walked through the process of splitting the hard drive so i can install ubuntu on D drive. also i know i need to create a swap partition do i do that before the installation of after?
I recently did a side by side install of lubuntu on my windows 7 laptop. My HDD is actually 2 x 250GB HDDs. I have Win7 on the first, and chose to put Lubuntu on a part of the second. However, when I boot, I can only see the options for that second drive. when I went into the boot order It only shows the Harddrive as an option, not which one. Is there any way I can boot from my first drive again? I need to be able to get at my Windows 7, it is my main OS as I need Excel 07 for a college course. (due to auto-grading none others will work, not even office for mac (which is missing pivot-tables anyways).
So to summarize, I seem to have lost the ability to boot from the first hard drive, and cant find the separate hard disks in the boot order. Preferrablly I would like both OSes (Win7 and Lubuntu) to appear on the same boot choice list, but at least I would like to be able to access Windows7 and only use Lubuntu when I need it. (mainly for my Compouter Science coursework)
I have one disk which is currently partitioned as follows:
I am looking to install Ubuntu 10.10 from a cd onto this drive, without disturbing the XP installation. I wish to completely overwrite the Kubuntu installation as there is no data there I wish to save.
I got to the advanced partition management part of the installation process on the installation cd, but it was a little too advanced for my liking. I wasn't exactly sure what the implications of everything was, in particular:
Should I reformat the ext3 partition as ext4? I am not sure as to the pros and cons of either. I'm assuming mounting '/' there is fine.
Is 510 MB of swap enough? I have 2GB of RAM and don't expect to use any memory intensive applications, nor use any hibernation functionality, etc.
There is a dropdown list asking me about where to put the bootloader. I already have one which currently prompts me to choose between various Kubuntu kernels or Windows XP. I suspect this is located on "/dev/sda" (ie. the drive, presumably the MBR) as opposed to "/dev/sda1" (the ext3 partition) or "/dev/sda2" (the XP partition) but I am unsure where the current one is. The word 'GRUB' does appear about 380 bytes into my first physical disk however, which seems like the MBR if I'm remembering correctly. What should I choose here?
Is there a need for me to explicitly mount my NTFS drive here, or is that something I can easily do later? (I gather NTFS support is pretty good these days?)
Installed XP and ubuntu 10.10 on my netbook and have also installed BT4 r2 on separate partitions. I chose not to install the bootloader for BT4 r2 and used "sudo update-grub2" to locate Backtrack 4 which it has. At boot I can choose both XP and Ubuntu and they will boot fine, how ever when I choose BT4 (listed as ubuntu 8.10) the following message appears:
"zImage does not support 32bit boot"
How can I boot backtrack.
I have a 300 GB hard drive and 3 GB RAM and its Core2Duo processor on which I have created 3 partitions when I installed Windows.
1. C: - 100 GB in which Windows is installed.
2. D: - 100 GB in which I have kept my personal stuff.
3. Unallocated space of 100 GB.
I want to install Ubuntu in this un-allocated space. How do I proceed for dual booting? I do not understand how to create partitions