frequently getting a red symbol on my taskbar with the message "crash detected in abrt-gui ...".What program is producing this? There is no indication of what action I'm supposed to take, so the message is not useful. It also seems to violate a basic principle that any program producing an error message should announce its own name.
View 3 RepliesI'm using fedora 13 x86_64 and firefox. I have installed flash player: flash-plugin-10.1.82.76-release.i386.rpm.
Whenever I open any website having flash content, firefox shows missing plugin symbol and message.
I am trying to setup the wlan access for my Fedora 9 system. I installed ndiswrapper. But when I run
Code:
ndiswrapper -l
i am getting the error
Code:
/usr/bin/perl: symbol lookup error: /usr/bin/perl: undefined symbol: PL_use_safe_putenv
I'm having some trouble with my Taskbar. It's supossed to flash or blink when I receive a message (I've already configured Pidgin and I've also tried with emesene) but it just doesn't flash. I think it's something related to gnome or ubuntu config so it won't flash under any circumstance but I am not sure.
View 1 Replies View Relatedwhen ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies View RelatedI'm using the ./livecd-iso-to-disk.sh script to create a bootable usb. Now in the arguments you're supposed to indicate a partition name. But my usb device gets auto-mounted to /media. And if I try to pass in /dev/sdb it gives me a "no media detected" message. What do?
View 3 Replies View RelatedI have been using dropbox for quite some time but in the last few days I have been bumping into a problem.Recently I had a fresh install (GNOME3 and afterwards added KDE 4.6) and after installing dropbox I get the following error:
Code:
*** glibc detected *** /home/filipe/.dropbox-dist/dropbox: double free or corruption (!prev): 0xb3d44d08 ***
and dropbox terminates...
[code]....
So last night suddenly my computer started running really slow. Like it would take a couple of minutes for a window to open. I tried to start System Monitor to see what was going on, but couldn't get it to launch. At first I thought something had grabbed the CPU, but eventually I discovered that something was writing a massive amount to the hard disk. The intensive disk activity continued for about 20 minutes as I watched nervously. Just as the disk activity suddenly stopped ABRT popped up a message that disappeared to fast to read fully, but it said something about a file that was too large.
This morning I discovered that about 9 GB of my hard disk had been used up. Using "find -size +1G" I found an 8.6 GB file in /var/spool/abrt /ccpp-1291706342-2244/ called "coredump."I don't know what a coredump is or how to look inside the file to see what might have caused its creation. But I do know that ABRT has not said a word about the incident.
I've compiled a program on ubuntu with python(make python) but the problem comes when I try to use it and exactly after the command line "from libpy import *", the message that appears is such
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "libpy/knit.py", line 28, in <module>
import _knit
ImportError: libpy/_knit.so: undefined symbol: _ZTVN10__cxxabiv120__si_class_type_infoE
Lately I have been getting a Python bug surfacing through my ABRT. The Python version is 2.6.2-2.fc12.
View 1 Replies View RelatedWhenever I log into Fedora, an icon (a triangle with an exclamation mark) pops up in the main panel . When I move the mouse over it, the following is displayed. ABRT service not running. I restarted the service from the service configuration window but there was no difference. How do I configure it to run alway
View 5 Replies View RelatedI can't find how to clear ABRT cache (other than to forcibly 'rm -rf /var/cache/abrt/'). How does one clear out the pile (which has grown to 1.2 GB here)?
View 3 Replies View RelatedFirst of all, I was unsure whether this should go in General Support or in Installation. The problem is occurring on my first boot of a freshly installed F12 system, but the immediate problem seems to be more concerned with Automatic Bug Reporting Tool and/or Bugzilla plugin.
That more immediate problem is: when I run the tool to report a crash, it complains that the Bugzilla Plugin is not properly configured. So I look at Edit->Plugins->Bugzilla just as it suggests, and I see a bugzilla URL that looks right, and blank Login and Password.
However, since I just did the F12 installation, which presumably is designed for any user, not a developer or member of the F12 project, there is no reason to assume that I even HAVE a login. So this is the first question: what Login and Password are they expecting here? Is there a special Login for the ABRT?
I have F12 and been using the livecd-creator command since F9 to create liveUSB devices which are used to install Fedora on all the systems (nearly 100) I support at different sites ensuring they have the same build/configuration. About a week ago, I created a new image and when I attempt to install to hard drive, there is an ABRT message displayed;
"A crash in the anaconda-12.46-2.fc12 package has been detected"
Also see attached file.Now I am not able to install to hard drive.
It appears this is a known bug which has been reported at url.and that there is not fix planned. Can anyone confirm this?
If this is the case, does it mean that the �Install to Hard Drive� feature will no longer be available?
Apache doesn't start with libedit.so.0.0.34 ( from libedit0-3.0.snap20090923-4.1.x86_64 ).
Code:
[Tue Dec 15 16:20:51 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
PHP Warning: Directive 'register_long_arrays' is deprecated in PHP 5.3 and greater in Unknown on line 0
/usr/sbin/httpd2-prefork: symbol lookup error: /usr/lib64/libedit.so.0: undefined symbol: tgetent
Solution: I copied /usr/lib64/libedit.so.0.0.27 from a previous install and symlinked /usr/lib64/libedit.so.0 to it.
ive made a slight mistake on my Ubuntu 9.10 64bit. I was trying to get Voodoo Motion Tracking software to work, and it was having trouble locating some Qt Libs, so I decided it was a good idea to move its included libs into /user/lib32 directory. Voodoo now works, but Skype instead comes up with:
Code:
skype: symbol lookup error: /usr/lib32/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv Skype was installed using their own provided 64bit .deb - it was previously working fine.
The most recent update impacted my thunderbird-3.0. When launched I get these error messages
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: Symbol `SSL_ImplementedCiphers' has different size in shared object, consider re-linking
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: symbol lookup error: /usr/lib/libnssutil3.so.1d: undefined symbol: PL_ClearArenaPool
I can only assume the libnssutil3 library was upgraded and this broke the library call in the thunderbird-3.0.
I performed a yum update and now my yum is not working and I am unable to start my apache processes (in a dmz configuration).This is the error I am getting from yum.
yum clean
Traceback (most recent call last):
File "/usr/bin/yum", line 4, in ?
import yum
[code]....
I'm running Ubuntu 10.10 and was looking for software to mix mp3's. I want to try mixxx (found here) I installed the most recent package by using the ppa of the project (as described here) Install seems to be ok (no error messages)But when I try to run mixxx from the menu nothing happens. Nothing. Running it from the terminal with the command
Code:
mixxx
I get this error message:
Quote:
mixxx: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN16QIODevicePrivate4peekEPcx
I have fedora 12 32 bits installed on a Macbook pro (intel core duo) I did "yum update" this morning, I have restarted the system and got the following message:Starting abrt daemon: abrtd: Failed to start: got sig 2 FAILEDI have browsed in the web but I cannot find useful information. Then I typed:$rpm -qa | grep abrt
abrt-libs-1.0.0-1.fc12.i686
abrt-libs-1.0.3-1.fc12.i686
abrt-addon-kerneloops-1.0.3-1.fc12.i686
[code]...
Every time I login I get the abrt flashing light at the top of the screen, but nothing comes up. When I try to run it manually from Applications->System Tools->Automatic Bug Reporting Tool I get a popup with:
Quote:
Error while loading the dumplist. org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)Is anybody else seeing this? If so, any idea as to what's going on? How to fix it?
I could just dump abrt since it's hardly a necessity, but I'm inclined not to as I think it's a good idea which could potentially be of great benefit to us all.
Since upgrading last week we keep getting a red icon warning msg for the ABRT system - it's not really something we want to have activated - is there any way to turn it off ?
View 3 Replies View RelatedI had a major foul-up a couple of days ago, and I now have thousands of bug reports in the abrt applet. I'm trying to delete them individually, but it's taking forever. Is there a way to mass delete these reports to clean things up? I looked at abrt-cli and it has a --delete command, but only does them one at a time, too.
View 2 Replies View RelatedIs there a way to clean (reduce size of) the abrt cache (/var/cache/abrt)? Perhaps something similar to "yum clean all"?
View 1 Replies View RelatedQuestion about the bug reporting system that I think is called ABRT Struggling with F15 and want to file a bug report, but the backtrace thingy says I should remove sensitive data first. Obviously a good idea, but the report is full of what to a non-programmer looks like gibberish - things like what I guess are hexadecimal numbers or memory addresses, none of which I understand. Can any of that incomprehensible stuff contain sensitive data, like encryption keys or anything someone would need to crack a machine? If I remove all of that then the bug report will be pretty sparse.
(Same question applies to SMOLT - machine profie report - as well) Or is "sensitive" just about the human readable data in the reports?
After CentOS5.3 install to /sdb7 partition (on 2nd HD) and using Ubuntu Grub(on 1st HD mbr) to boot CentOS, I get "memory for crash kernel 0x0 to 0x0 not within permissible range" as soon as CentOS starts. I have 2G of ram. The message is on every boot. I've had several other linuxes on that partition without such an error message. Otherwise the OS starts fine. Is the message of concern/import?
View 3 Replies View RelatedI installed Fedora 12 onto my PC today and I've tried installing a set of updates and get the following
A package could not be found that allows the action to complete.
librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686
librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686 : librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686
librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686
It isn't in Yum, where do I find it?
If I turn off the quiet mode in the boot options, it does throw up some errors (e.g. SQASHFS), and then stops after "starting abrt daemon".
On an AMD Athelon. It worked fine of F9, but started playing up, so I'm looking at upgrading.
when I open synaptics I get this message:
E: Error occured while processing abrt (CollectFileProvides)
E: Problem with MergeFileProvides /var/lib/apt/lists/download.fedoraproject.org_pub_fedora_linux_update s_12_x86%5f64_repodata_repomd.xml
E: The package lists or status file could not be parsed or opened.
Has anyone noticed ABRT not being able to connect to Bugzilla or the remote Core Dump analysis server? Since my upgrade during the beta phase of F15 I have been unable to file bug reports from ABRT's traces, nor has it offered me the option to file bugs to bugzilla. What it does, however, is offer me to analyse the Core Dump and backtrace of the crash using either the remote server or locally with GDB. Needless to say I'm clueless in GDB, and it requires a LOT of debug symbols found in the corresponding debug packages. But trying to use the remote analysis server always results in a message of the server being busy and to try again later. IIRC the last time I was able to file a bug through ABRT was in 13, has anyone been able to do so in 15?
View 14 Replies View Related