I have a DigitalPersona U.are.U 4000 Fingerprint Reader. I can run fprintd-enroll, and the device turns on, but it does not recognise anything that touches it. 'yum install *fprint*'
View 2 RepliesDoes anyone know how and where I can install the drivers for the following device:
View 3 Replies View RelatedI am working on a project that requires fingerprint reader support. So, I installed the libfprint and libfprint-devel packages on my Fedora 14 system, to support my Authentec AES 2501 fingerprint reader. I know that my device is alright because it is working fine on the Windows 7 installed on the same system. In fedora, the fingerprint reader is recognized, when I run the fprintd-enroll command. The prompt to enroll the fingerprint is displayed on terminal. But, it just stands when I swipe my finger. I have tried everything but cannot resolve the issue. The output of usb-devices command shows "Driver=none" under fingerprint sensor usb device. But, I have the libfprint installed.
View 8 Replies View RelatedDigital Persona Fingerprint reader is not working on dell 1535. I am using fedora 13 64 bit edition. I have tried using lsusb |grep -i finger but nothing has come up. I have installed all the fprintd packages but still no luck.
View 2 Replies View RelatedI just installed openSUSE 11.2 KDE when I tried to enable fingerprint authentication yast didn't ask me to swipe my finger it was working properly on GNOME.
View 2 Replies View Relatedi attach microsoft fingerprint reader but in linux os when i compile my program dev : not device found error occurethis is usb device if i want to load driver module then what to do
i use dpfc lib
Does any one know about fingerprint in HP dv4 to work.
fprint is installed but didnot detect the reader.
Code:
lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I've recently noticed that whenever I log in via fingerprint reader (AES2501), my system behaves strangely.
For example, the Gnome panels take almost a full minute to appear after everything else has been loaded, and there's no NetworkManager icon in the panel - even though nm-applet (and thus NetworkManager) is running as shown by top; that can be (partially) solved by killing NetworkManager, restarting dbus, and then manually running NetworkManager.
None of that happens when logging in using a password.
Short of not using my fingerprint reader, what can I do?
I have been struggling to try to get a fingerprint reader working for CentOS 5.X. It seems that everything I read refers me to BioAPI-1.2.2 and pam_bioapi. I currently have an older model of a UPEK fingerprint reader and downloaded the SDK that is compatible with the model, but have not quite made it that far. I can't seem to get the BioAPI to install and compile properly.
From what i've read is that the BioAPI is so old that the code just isn't compatible with CentOS 5.X, only 4.X and other early OS's. Does anybody have any tips for me or suggestions for a desktop fingerprint reader for CentOS 5.X? (yes i have thought about other distros, but it's not my choice, its the head honcho)
Installed fedora 13 to hard drive on fresh partition,installed ok,ran updater,installed all updates.all working ok but fedora is not able to detect my laptop monitor.i am unable to increase resolution.stuck on 800 * 600. when a window in open and i need to click at the bottom of the window i cant because it is bellow the screen.I went to [URL] to look for drivers.it only shows display drivers for red hat 7.0.i tried them but wont install.is thier drivers i can use for fedora 13,or a way to force resolution into 1024*768.
View 1 Replies View RelatedSince yesterday my sudo doesn't work with my fingerprintreader anymore. su and GDM still do. sudo just asks me for the password instead of asking for a finger-swipe. AFAIR I changed nothing, but I accidentally forwarded the USB-Port on which the scanner is connected to VMware. I disconnected it, but maybe there could be the problem.
Fedora 12 x64, Thinkpad T61 integrated Fingerreader.
Are there any possible options to archive this w/ the 2.6.34 kernel? I know windows can do this w/ a button and BSD can drop packets when connected to closed ports...is IP personality usable in 2.6? Do I need work-arounds? any more options??Currently I've managed to @%#$ my OS fingerprints so results won't show as Linux.4/2.6...etc, but the problem is.. instead it's got the word "Redhat" in it (which is well... worse... because now.. if someone looks at my machine he/she'll know I am on either RHEL/Fedora )
View 14 Replies View RelatedI'm looking for alternative to Adobe Acrobat Reader, a slim free PDF Reader with browser plugin, for example for Iceweasel.
View 6 Replies View RelatedI have openSUSE 11.2, 64 bits. I use Evince from the very beginning. Since a few weeks, when I want to open a .pdf file, Acrobat Reader appears and reads my file. It seems to have become the default reader now. However, I never wanted to change from Evince :this simple program is well enough for me. I tried various ways, but I can't define Evince as my default .pdf reader. How can I make Evince to become my default reader again please ?
View 9 Replies View RelatedAfter some difficulties I succeeded to run this TV card under SUSE 11.1 with kaffeine 0.8.8.Everything works fine except for that the card refuses to tune on a DVB-S2 transponder. (For Example TP 11 on Astra 19.2E)The terminal output looks like this:
Tuning to: Das Erste HD / autocount: 1
Using DVB device 0:0 "Conexant CX24116/CX24118"
tuning DVB-S to 11362000 h 22000000
[code]....
I've been having big problems getting 9.10 to work with a Geforce4 MX-4000 card. I know it is not a hardware problem because I've got a dual boot win xp/9.10 setup and the video card works very well under win xp. The monitor is a Samsung P2250. The issue is that the highest resolution available after installing the recommended nvidia 96 driver is 800x600, the same as that before the driver was installed. This is very frustrating because the monitor requires 1920x1080 I'm not sure whether the driver is at fault or the xorg.conf settings.
Should I try installing the nvidia site drivers? I've checked out several forum threads on xorg.conf settings but I'm really not sure how to go on this. What I need is an entry level guide to setting up xorg.conf. The manual here is not that user friendly.
for some reason, ubuntu cant see it anymore. so how to fix? windows still prints to this printer on the network. I deleted the printer in ubuntu and tried to redetect and now it says no printer at that address.
before I deleted it, I recall it saying something about the backend had failed?
i've been using foxit pdf reader on Windows for sometime now, on Fedora i can't find any pdf reader that has tab feature so i can use only one window because i get to open a few pdfs at one time.
I have tried installing Foxit under WINE but scrolling through the pages takes forever
anyone know of any good pdf reader that has tab feature? i'm surprised that the outcomes of my searches haven't brought up a single Linux pdf reader that has tab feature...
Is there an easy to use log reader, without needing to be root. My typing is goofy and doing su and vi to read a log is getting old.
Using 2.6.31.12-174.2.22.fc12.x86_64
I notice sometimes if the page has graphics it either is very slow to print or wont print.Will adding memory help? I was thinking of a 64mb module.
View 5 Replies View RelatedI have a Swedish version of Acrobat Reader that that wouldn't change to English that I want to remove, what is the name of acrobat for removal
View 2 Replies View RelatedI don't know why and when the Adobe Reader 8 was installed in my system and its icon appears in the Application-> Office menu. Its interface is not English. So I want to uninstall it. I cannot find it in the list of System-> Administration-> Add/Remove Software.
View 4 Replies View RelatedI installed adobe reader quite some time back. It was working fine. Nowadays it gets stuck up and then the screen fades out and then after some seconds it gets back to normal. What could be the problem.
View 9 Replies View RelatedI'M trying to install a e-book reader called Caliber Ebook managment using the info they have on the HP: wget -O- http://status.calibre-ebook.com/dist/src | tar xvz cd calibre* sudo python setup.py install
And get this message
[sudo] password for zoku:
Sorry, try again.
[sudo] password for zoku:
zoku is not in the sudoers file. This incident will be reported. I have no Idea what the SUdoers are and why i'm not in them.
I've looked through a few websites looking for a way to install a CAC reader to use with DoD. I would think that Fedora nee Redhat would support this out of the box, but it appears not to be the case.It appears to need pcscd (with possible restarts on login), coolkey, and various other packages, and DoD certs 11 through 26.What is the easiest way to get the CAC working? I know Linux can do it. The Air Force developed a live CD which recognizes the CAC reader by default.
View 2 Replies View RelatedI am using:
Code:
[gastonv@gastonv ~]$ uname -a
Linux gastonv 2.6.35.6-48.fc14.i686.PAE #1 SMP Fri Oct 22 15:27:53 UTC 2010 i686 i686 i386
[code]...
I am trying to install the adobe reader in Fedora 14 using yum. When I try this I get a list of packages that also need to be installed. What do I do? I tried to remove avahi-libs-0.6.27-2.fc14.i686, but it wanted to also remove 200+ other things.Needless to say I declined the removal.
View 4 Replies View RelatedI have fedora 13 (64 bit) in my laptop with athlon amd processor (64 bit). I installed adobe pdf reader. but does not work. any solution?
View 3 Replies View RelatedI installed adobe pdf reader in my lap top with amd 64 bit processor and fedora 13 (64 bit). But it does not work
View 2 Replies View RelatedI have successfully installed Adobe Reader 9.1. It shows up in firefox as a plugin properly. It does not show up in edit->preferences as an Application (not sure if that matters). However when I click on a PDF to download, I get an error in the browser:
"Could not launch Adobe Reader 9.1.2. Please make sure it exists in PATH variable in the environment. If the problem persists, please reinstall the application."
I put the /opt/Adobe/Reader9/bin in my PATH in ~/.bashrc and even rebooted to make sure all was set. I still get the same message. Where do I set my PATH to make this work?