Fedora :: Can Mount A Logvol From Two Isos
Oct 29, 2009
I replaced the hds in my computer a while back. They were linked up as one logical volume, but before I pulled them out I saved isos of each disk.
However, now I need to find some information on them, but I can't figure out how to mount the isos. When I try mount -o loop on either iso, it tells me it can't recognize the file system type.
mount:
So I'm guessing that somehow I have to tell mount that they are two parts of one logical volume, but I'm not sure how to do that.
One way or another, is it going to be possible for me to recover the info from these isos?
View 5 Replies
ADVERTISEMENT
Jun 23, 2011
My LogVol00 has 1 Tb free space. Now I want to share 500gb of LogVol00 to LogVol04. How can I do this?
View 1 Replies
View Related
Oct 30, 2010
I have some ISO, UDF, and IMG files on my Windows partition that I would like to mount in Fedora so that I can run it as if it were a CD. In Windows, I used Magic Disk to do this. I searched the forums and found posts that told how to do it from the CLI, but I would like to do it from the GUI.
I am running Fedora 13 with Gnome.
View 2 Replies
View Related
Nov 18, 2009
I went on Windows and downloaded one of them through Firefox last night and the other one with a (faster) download manager after I tried verifying the first. Both return something completely different from what is located here:
instead of this: [URL]
c899659b8a7ceb8f005fc1a300b4e21c984a48fd7b8d8a332e d24bf8c3c479e8
I get this:
97A018BA32D43D0E76D032834FE7562BFFE8CEB3
These are SHA-1 hashes for the same file. Is something broken?
View 1 Replies
View Related
Oct 26, 2010
Does anyone else have unusual trouble burning ISOs to CD-RWs? When I want to make a new liveCD of a distro--or, really, any data that I might not want to keep in its current form--I like to burn to CD-RWs because I can erase and reuse them. Frugality. But I have a very high frequency of errors when I try to burn a distro to a CD-RW. Sometimes it ruins the CD-RW: after the error disrupts the burning, K3B starts telling me the disc is now a CD-ROM and can't be erased. I just lost three CD-RWs to that--damn it. And they weren'd old, failing CD-RWs: two had slight use, and one was brand new. Should I not be burning distro ISOs to CD-RWs?
View 8 Replies
View Related
Jul 23, 2011
I need to know where to look in Ubuntu to find the iso burning program. I normaly run slack and am not familiar with debian based systems, I have limited internet time
View 4 Replies
View Related
Feb 21, 2010
Is it possible to put the ISO images for Debian on your system and point the APT config at them with some sort of driver to read them like disks? That would sure save a lot of disk swapping.
View 2 Replies
View Related
Jan 13, 2010
I am having a problem checking the MD5SUM of some CDs burnt from ISOs, and I'm not sure whether the problem is the burning or the checking. I get the same problems on several PCs, and it seems to be dependent on the ISO. I have for a couple of years used a script someone gave me to verify CDs against ISOs when I want to check the disc and it has always worked in the past. The core line in the script is:
Code:
devmd5=`readom dev=$cddev sectors=0-$count f=- | md5sum | awk '{print $1}'
count is the size of the ORIGINAL ISO as calculated by isosize
[code]....
View 9 Replies
View Related
Feb 12, 2010
Does anybody know where UNetBootin stores the temporary .isos etc.. before it extracts and puts it on the USB stick. I notice my hard drive space is going down slowly and that's the only thing I've been downloading with for the past few days.
View 1 Replies
View Related
Apr 7, 2010
I have the 5 Debian 5.02 DVD/ISOs, and would like to set up a local server from which to perform installations using a PXE bootloader and the local LAN. Any pointers to how I might accomplish this? All of the online resources I've found for network-based installs expect to do all downloading from a remote mirror, and I would prefer to limit my network traffic to the local LAN. Also, I want to install to multiple new hosts, and would like to avoid doing a lot of babysitting and swapping DVDs in and out of the drives (and some hosts are without DVD readers).
View 12 Replies
View Related
Aug 14, 2010
How many isos out of 7 shall i download to have a functional environment?
[url]
View 1 Replies
View Related
May 28, 2010
I'm trying to make a sort of "toolkit" flash drive using grub2 but I am running into some problems. For some reason, every entry below gives me the error "you must load the kernel first" when I try to boot it. I have checked in the grub command line and it appears that grub sees my flash drive as the first drive when booting. This is what my grub.cfg looks like.
Code:
#Clonezilla v1.2.5-17
menuentry "Clonezilla 32"
{
set isofile="/boot/isos/clonezilla32.iso"
loopback loop $isofile
[Code]...
View 9 Replies
View Related
Jun 30, 2011
I think opensuse should provide regenerated ISO files to public after several package updated. I think this may help reduce duplicate bug reports and reduce net traffics. I think this can greatly increase the user experience of opensuse.
View 5 Replies
View Related
Jun 18, 2010
"In this tutorial you will prepare a USB flash drive to make it bootable. After you booted it it shows you a menu where you can choose which live system you want to boot. So you might be interested in this tutorial if: You want to have multiple live systems on one USB flash drive In the future you want to create a new bootable live system just by copying the ISO file onto the drive and edit the grub.cfg You don't want to or can't use Distro specific LiveUSB creator tools You prefer a cleaner solution than the most LiveUSB creator tools which create several folders and files at the device root You are feeling bored and want to see cool features of Grub2 If you have a Grub2 version with Lua support you even don't need to manually edit the grub.cfg when you add new or remove live systems." Remainder of information is found here: [URL] This was found in a closed Karmic Development forum - can this be validated and updated if needed for Lucid?
View 2 Replies
View Related
Sep 17, 2010
Its annoying to unmount my flash drive twice.. its not a major problem actually but its kinda annoying , its whenever i plug-in my flash drive.. everything works well except when i need to un-mount it.. I usually unmount it twice using right-click of the mouse, then it mounts itself back, so i have to unmount it again.. Is there any way to control this? How do i setup the auto-mount option for USB flash drives?
View 1 Replies
View Related
Nov 10, 2010
Based on a vendor req I'm trying to install SuSE 9.
The download section on SuSE provide 9 SP4 ISOs.
When trying to install, I get the following message:
"Make sure that CD number 1 is in your drive."
This is, fortunately, documented in the README file.
It says to throw in the GA ISO/CD when you get this.
Ok, fine, but where the heck do I get the 9 GA ISOs?
View 2 Replies
View Related
Dec 12, 2009
I was able to do this using Daemon Tools lite under Windows and Toast Titanium under mac. How do I mount a image as a fake cd under linux, so that I can install it under WINE
View 1 Replies
View Related
Dec 12, 2008
I used centos final 5.2 for several months, and now I have one problem. I only get 5.0G for /usr and now it has been used for 98%, and I want to move something away. But it can't work. It goes: *.sh mv /usr/share /home/share ln -s /home/share /usr/share and then when I reboot it I found many "FAILED" and when I do the same thing about /usr/lib even I can't enter my system , and after I used a rescued disk did I enter it .
I think it must be the problem that when the system mount /usr it didn't mount /home and then it can't enter /home partition, but now how can I do the things as I wished? My /usr partition's usage is 98% , but there's some extra source code has been added in. Because when I learned the book <<Linux Device Driver>>, it can't be compiled correctly even I recompiled the kernel... (I had move the source code but remained a link to it) , now I can't compiled the samples in the LDD correctdly.
View 4 Replies
View Related
Jun 6, 2010
It seems I cannot mount and unmount a USB Drive, it gives me the following error:
Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/DAVE-1
I have changed FSTAB, and now it looks like this:
proc/procprocdefaults00
sysfs/syssysfsnoauto00
usbfs /proc/bus/usb usbfs auto,user 00
devpts/dev/ptsdevptsmode=0620,gid=500
code....
View 2 Replies
View Related
May 5, 2011
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
View 2 Replies
View Related
Feb 6, 2010
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
View 3 Replies
View Related
Mar 12, 2010
I installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
View 1 Replies
View Related
Jul 26, 2010
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies
View Related
Feb 10, 2010
I am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
View 14 Replies
View Related
Jun 26, 2011
actually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies
View Related
Jun 24, 2010
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
View 1 Replies
View Related
Mar 18, 2011
I am struggling with getting an sshfs mount mounted on system boot. I have a script that mounts the sshfs for "userA". When userA runs the script all is well - user A can access the remote filesystem, root user can't see it as expected. The basic command is: sshfs userA@remote host:/home/userA /home/userA/mountdir -p 21212 -o password_stdin < passwordfile. I can prepend the sshfs command in the script with su - userA -c and when I run this script logged in as root all is well, userA has access and all is well. If I then put this script in /etc/init.d and reference it properly in the rc. directories the mount doesn't happen. If I prepend the sshfs command with sudo, same thing. Logged in as root I can run the script and UserA has access. Run the script in /etc/init.d during startup and the mount doesn't happen. Echoing text to a log file shows that the script is being executed but no mount happens.
View 4 Replies
View Related
Apr 29, 2010
I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
View 9 Replies
View Related
Jan 16, 2011
I saw a post where you were faceing "Type s for swith or M or mannual restore"
I got the same message. I tried S but nthing happend then I tried M. it took me to root@ubuntu:/#
How i restore it manunally or if not possible I need to back up the data to pend drive
but i cant find the pendrive in the home section.
View 2 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type
fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running:
mdadm --zero-superblock /dev/sda6
mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf
mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module
[root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4
Enter passphrase:
Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume: mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
Now, I unmount the volume
cd ~
Code:
umount /ftdata
cryptsetup remove ftdata
And now, if I try to setup my encrypted volume like this:
Code:
[root@localhost ~]# cryptsetup create ftdata /dev/md4
Enter passphrase:
mount -O noatime /dev/mapper/ftdata /ftdata
I get this error:
mount: you must specify the filesystem type
[Code].....
View 1 Replies
View Related
