Fedora :: Add 2 Or More SPIN - Possible?
Nov 6, 2010there is a simple command like: Code: yum spininstall "name spin" that allows you to install all packages with a simple command? it would be nice if there :-)
View 3 Repliesthere is a simple command like: Code: yum spininstall "name spin" that allows you to install all packages with a simple command? it would be nice if there :-)
View 3 RepliesDoes fedora 12 lxde spin have opeoffice.org?
View 1 Replies View RelatedI've installed the Xfce spin of Fedora 14 (64). The Panel (or main task bar) has several icons by default and as most people. I like to add/remove and move the different items and shortcuts. I can add and remove, however moving items I cannot. When I right-click and select 'Move', the Panel turns gray, in fact it's completely grayed out, like locked. For info, it was absolutely fine in F13.
View 3 Replies View RelatedI want a automatic login in my system with fedora 15 LXDE Spin. I followed the steps given in this thread but it doesn't work. There is no login screen option in administration also. What should I do?
View 4 Replies View RelatedI have installed a LXDE F14 spin into my laptop cause I its older, the thing is that I would like to use Gnome login screen, like where you choose your desktop management and insert your password. I have gnome installed as well..
PS. or can I just update LXDE to the version that comes with F15 (I looked to it quickly and seemed cool) without fresh install ?
I want to install Fedora KDE spin on an existing XFS partition without formatting it. (Since said partition is full of my data that I have nowhere else to put). But the installer doesn't allow me to set the partition as / without formatting. XFS is not one of the filesystems listed as options for formatting. How can I make Fedora do what I want?
View 7 Replies View RelatedI've been trying to get Security Spin up and running (after having tried unsuccessfully with knoppix STD). I need to be able to connect to my home network, or hell any wireless network.I've tried using iwconfig wlan0 as well as the options in the Network Configuration panel as well as other related panels. I'm able to change and set up profiles for the wireless card, but not to activate them. The button just isn't clickable.If it helps, I'm running Security Spin from a unetbootin usb drive. The wireless card is identified by the system as "Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection" .
View 2 Replies View RelatedI want to set up a web server on a PIII machine with about 800MHz processor and just under 500 megs of RAM. So how would I go about configuring Fedora 12 to do this? I've tried the small spins and I just don't know how to configure it so it will install properly. I was able to get the Gnome spin on it but when it booted I couldn't get through the log-on screen. I have an AGP NVIDIA Geoforce 6200 video card. I'm wondering it that's it. The only Linux distros I could get on the machine was Puppy and Debian. Puppy did not edit the boot record very well. Debian went on there with very minor issues, but edited the master boot record very well so that I can dual boot to WindowsXp HE. I also tried to put Centos on there but the Live CD is not installable. I have to make an installation CD from the DVD Package. Anyways, as far as Fedora is concerned, I just want a utility, light weight spin that has web-server, mail server, and eventually MySQL. Other wise I'll have to commit treason and use the horned Debian as my savior in this battle.
View 9 Replies View RelatedI am trying to install Realtek RTL8192E wireless drivers for Toshiba satellite 510 in Fedora 14 KDE SPIN. I have been searching it for long time. I am not getting any tutorials or any methids to get this sorted.
View 1 Replies View Relatedlove security/pentest tools. This script adds ALL the tools from the Security Spin, plus Metasploit. Feel free to modify it if need be.
View 12 Replies View RelatedIs Fedora LXDE Spin is any different then the LXDE installed the repositories>?
View 3 Replies View RelatedFYI Security Spin.
[url]
"...The Fedora Security Spin provides a safe test environment to work on security auditing, forensics, system rescue and teaching security testing methodologies in universities and other organizations. The spin is maintained by a community of security testers and developers. It comes with the clean and fast LXDE Desktop Environment and a customized menu that provides all the instruments needed to follow a proper test path for security testing or to rescue a broken system. The Live image has been crafted to make it possible to install software while running, and if you are running it from a USB stick created with the LiveUSB Creator's overlay feature, you can install and update software and save your test results permanently..."
About Security Spin -
[url]
Available Apps of Security Spin -
[url]
Using SMB to access a windows machine through port 139/445 is great, but how can this be used to exploit the system?I know this is gonna get flamed for the nature of hacking, but i'm trying to pen my own windows box with my sec spin of fedora (tried backtrack but didnt like the feel of it, so got the GNOME-security spin)I'm trying to find a way to open up c$ without sitting at my win box and sharing it.
View 1 Replies View RelatedI have used the following code for HDD spindown.
Quote:
{
#ifndef WIN_STANDBYNOW1
#define WIN_STANDBYNOW1 0xE0
#endif
[code]....
Is ther any ioctl command to do HDD spin-up from spin-down? or Is there any way to HDD spin-up?
I come here as a technical PC user and fan of the Ubuntu forums ^^..I am the current owner of a Western Digital Portable HDD - Blue - 320 GB (Advertised).Recently, I have discovered I had bad sectors (Which were remapped I guess according to Ubuntu's Disk Utility-message that popped up in the upper right)... How is something I don't know because I have already had it replaced due to an internal busted USB port, and have taken really good care of it.Well, I right-clicked in My Computer on the drive (Windows XP) and ran Windows Error Checking on it. It took over a day and finally came up with a failure message. During the test, the drive made funky (yes, funky) noises and now is inaccessible. (It will NOT spin up, or show up as a drive in XP ANYWHERE (Including Device Manager) [but it does go into sleep mode o.0])
I do not have my files backed up, and this is so because this IS my backup =. (Or.. 'Temporary File Storage' for the critics out there.)I have access to WinXP, Vista, Ubuntu, Mac OSX, and Win7, and the bottom line is that I don't know what to do.. I bought it at Walmart (about $100) and also a replacement plan.. but the thing is, I'm not sure if it is dead, and whether or not I can somehow recover my files without disassembly..I'm thinking that maybe the Sata / USB internal interface is dead, but wouldn't putting it into another enclosure void the warrantee?Help? (I'm sorry in advance if this has been posted in the past... I would just like to know what I should do)I know this involves Windows, but from reading what I have, I have determined that this forum has more intelligent people than any other.
System Specs
3.2 GHz Dell GX280
Sans Digital TR5M-B in JBOD configuration (PCIe 1x)
CentOS 5.4 installed via QmailToaster instructions. Up to date via YUM.
No GUI (no KDE/Gnome), command line only.
My old server died and reinstalled based on above with no problems. All is running well. Box is used as mail/web/home disk network. I want to be able to spin down the drives in the Sans Digital box when idle as they are used mostly for bulk storage (video editing, etc...). The external enclosure on my old server automatically spun down idle drives so this has never been a concern. Google has not helped me so far (operator error?). I did see "hdparm" may work if the drives support it but I am not sure if this is the nest solution.
I realize this has been asked many times before, but I'm fairly certain I've read through the majority of those threads and haven't found a working solution yet. I recently built up a Ubuntu Server 10.10 x64 box for backups, serving up files, and development activities. The server is running SATA drives in AHCI mode. Because this is a file server I have quite a few hard drives installed, which are currently a mix of WD 1TB Black and Green drives. I'm attempting to get my non-boot/data only drives to spin down after 10 minutes. I've tried the following:
1. Edit hdparm.conf with the following, replacing 'b' with the identifier for each disk:
Code:
/dev/sdb {
spindown_time = 120
}
This fails, and based on my research I'm pretty sure udev isn't properly running the hdparm configuration anyway.
2. I've also tried manually setting the spin down time with hdparm as follows (via command line and through rc.local):
Code:
hdparm -q -S 120 /dev/sdb
Which states that it successfully set the spin down timer to 10 minutes, but this also fails as the drive never spins down.
3. Finally, I just forced it to spin down immediately with:
Code:
hdparm -y /dev/sdb
This worked! Unfortunately, that approach isn't terribly useful. The drive stayed spun down for 20 minutes (thus far), so I haven't bothered to run iostat, etc to try and figure out if something is keeping the drives active. I don't believe there is because one of my drives isn't even mounted currently and it also won't spin down automatically.
I have a NAS box that runs Ubuntu Server and Samba. 4 of the HDDs are in RAID5 (/dev/md1) and I've configured them to spin down after 10 minutes of inactivity. This filesystem is mounted on /share/Media. The other 2 HDDs are NOT configured to spin down. My other computer runs Ubuntu Desktop. I'm mounting the entire /share folder (that's located on NAS) using this entry in /etc/fstab:
[Code]...
(Ubuntu 10.10) I went to System->Preferences->Power Management and checked spin down hard disks whet possible. I have two internal sata hard drives. One is for the OS and the other is for media. Neither Hard disk is being spun down. Is there something else I need to do?
View 5 Replies View RelatedI have a WD20EZRX (Green) 3.5" hard drive installed in an external USB3 case (Icy Box IB-351StU3S-B), which is detected as an AS2105 device in Debian 7 (Linux 3.13 from back ports). My computer is a TP X200s. The problem is that the hard drive does not spin down even with hdparm -S timeout set and the file system unmounted. It does spin down with the hdparm -y command, though, and stays that way until accessed. The case also seems to prevent the TP entering standby mode, or at least the indication light is left blinking when the lid is closed. Other than this, the drive works fine. It does have a GPT partition scheme and ext3 file system.
Note that the TP does have only USB2 ports.
Ubuntu is not spinning-down my external hard drive when idle. How can I enable this?
View 1 Replies View RelatedI'm running 10.10 with about 10 SATA disks attached. If I spin them down with hdparm -Y, every disk that has a filesystem on it (but -not- disks that are partitioned but have no filesystem) spin up, simultaneously, about every 10 hours. How do I find the culprit? The machine is sitting effectively idle---I know it's not something I'm doing that's causing the spinups.Is there some way to monitor -anything- that touches a particular block device?
My suspicion is that this might be the gnome low-disk-space warning daemon statting everything. (This -used- to be gnome-volume-manager, but I'm not sure where that code went when GVM was dropped in 10.10---how do I find that code? What package is it in?)
And if it -is- the disk-space monitor, how do I kill it dead? Not just "don't tell me about disks", but "don't even bother looking". I would -really- like these drives to spin down and -stay- down, possibly for days or weeks, until needed---not spin up every 10 hours until I either manually spin them down or until whatever I've set in hdparm spins them back down.
So, I have raid5 array with one spare disk. Is it possible to spin-off/shutdown the spare disk until one drive fails and the spare disk is needed?
View 1 Replies View RelatedI want to install opensuse,add/remove programs,themes,customise and then re-spin it into an image which I can carry,perhaps as a live medium. I have heard Fedora has tools to do it.Does opensuse have any tool to do that?
View 9 Replies View RelatedI have a security cam watched by a computer with Motion. on that computer i use hdparm -S 240 /dev/hdb to stop the harddrive where the pictures go from running when not used (witch is usually 2 days in a row). Now when motion is detected, the first 3 or 4 pictures are saved, and then there is a pauze for about 5 sec. before the next picture. This has to do with the hard-disk spinning up (I tried without), but I don't understand why not more pictures are held in memory until the disk is ready. how to solve this without having the disk running all days?, or what i should start reading
motion (version 3.2.9)
Debian lenny
Kernel 2.6.26-2-686
hdparm v8.9
PII with 384mb ram
[code]...
GNOME has an option "Spin down hard disks when possible"; is it ever possible? I'm using a netbook so I only have one drive and the operating system is on it. Is the operating system ever idle for more than a few seconds? If I spin down my SATA drive with sdparm it spins back up immediately. It's a 320GB 7200RPM drive; just wondering if I could save some battery life.
View 1 Replies View RelatedI just wanted to upgrade to fedora 11 from the current version 5 with the of a live cd.I dont want to loose the previous configuration files. upgrade everything except the / directory. How do you do that? I also have a retarded WINXP partition on the same drive which I dont wanna loose.
View 9 Replies View RelatedIs it possible to import an xorg.conf file from Debian to Fedora and have it work? The reason for this is that I have an older monitor that only offers 800x600 as the maximum resolution.
View 2 Replies View Relatedinstall of Fedora, always used Debian or Ubuntu before now, and am looking for versions of localepurge, deborphan and debfoster - do they exist in the Fedora Software Repository?
View 10 Replies View RelatedI have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
View 4 Replies View Related