For some reason valgrind can't give an exact line number for memory leaks. I installed all of the debuginfo packages and I am compiling my program (gWaei) with the -g and -O1 flags. I just don't know anymore. Specifically the libwaei ones are worrying.
Code:
==26794== Memcheck, a memory error detector
==26794== Copyright (C) 2002-2010, and GNU GPL'd, by Julian Seward et al.
==26794== Using Valgrind-3.6.1 and LibVEX; rerun with -h for copyright info
I have Ubuntu 9.10 installed but the sound is way below normal.. Pulse-audio just doesn't give enough output.. Max output is just average... I have a 945 Intel chipset..
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector. ==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al. ==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
I'm trying to plug my Cinemizer video goggles [URL] to my notebook. The resolution is 640x480 (yeah, I know) and I go from VGA to RCA to 3.5, which is needed by the device. From a cable oriented viewpoint this should work, but Fedora doesn't recognise the googles as a second monitor. how to enable vga output with a 640x480 resolution? This is extremely important for me since I need it for a personal project as well as for my work.
I wasn't sure what to put this in since I don't know what the source of the problem could be. I'm using Ubuntu 10.04 (gonna upgrade soon) and as of yesterday I haven't been able to get a capital t from pressing shift+t keys. For some reason, all other keys work fine. Yesterday, the keys were triggering as maximize window/unmaximize window. I checked the keyboard shortcuts in Gnome and shift+t wasn't set to anything. I then assigned it to something else and removed it, and now the maximize/unmaximize problem is gone, but nothing happens when I press shift+t while typing. I can still get a capital T like I just did with caps lock on.
i'm in need of my hard drive & usb flash drive numbers, but when i do fdisk -l i get no results - it just gives me the prompt as if i've pressed the enter key on my k/board.
I just signed up for a free 2GB Ubuntu One account and I'm uploading a 400MB video file. It's been five minutes now, and the purple bar doesn't give an estimation of upload time. Why not?
CNR is installed with my fresspire, but it never initializes. I can't log in and I'm wondering if this is somehow related to the fact that I have not set up the email application that came with freespire.
I am installing ubuntu on a Dell m7750n machine that has the KSOD. I have done almost everything I can find to fix it. I was able to remove my data off of it using regedit....
So, I am sick of MS and found linux. I installed unbutu netbook on my netbook and it works like a charm.....
So, I went to install this on my desktop dell.... I have read of the many issue with this...
I was not able to boot from the CDlive as is. I kept getting a black screen with nothing. I then used the f6 to get into grub and then choose f6 to change the load options to load nomodeset and was able to load ubuntu from the drive, not install.
I would like to install ubuntu, but when I click on install from the 'tester' version it will not give me the option to install along side another OS (windows) that I see in the install ubuntu main website in the see how to do it.
I get two options: Erase and use entire disk Specify partitions manually (advanced)
Question: Can I install and select my own partitions using: [url]
Or, is there something wrong and I need to get that fixed before I install ubuntu?
I want to search files (basically .cc files) in /xx folder and subfolders. Those files (*.cc files) must contain #include "header.h" AND x() function. Clearly, I wanna list of *.cc files that have 'header.h' & 'x()'. They must have two strings.
I tried several ways, and got only files with header.h OR x(). Some examples given in Internet doesn't give any result in my system. I am using Fedora 8.0 in my PC and I have grep 2.5.1 version.
I'm using slack 12.2 with a custom 2.6.27.31 kernel with uvesafb already working- 1280x800 isn't natively supported by my graphics though :-(. Which is why I'm doing this.
So I'm trying to use this gentoo tutorial to get 915resolution working on my laptop for a widescreen framebuffer. Problem is, he doesn't give any documentation on what the files in the initramfs are supposed to be or do:
Code:
Can I put it in /sbin instead without breaking anything? I don't even know what v86d.real is, it doesn't exist on my system. If somebody could explain that, that would be great.
2.) There's also a script called "dump_bios" in the slackbuild of 915resolution that's supposed to go into /usr/sbin along with the 915resolution binary. If I'm moving this to /sbin, should the dump_bios script go with it? Well, since it's only a dd command, might as well post it:
Code:
I think those are the only questions I have right now, though I'm probably leaving some out.
Ah, here's one hurdle: /usr is on a different partition than /, so I can't just change the initramfs script (I think- isn't the initramfs called before everything in fstab is mounted?).
When I connect my Debian PC to my WiFi router my PC doesn't get internet if other devices are connected to it .
When i disconnect those devices and connect my Debian PC only then my PC connects to internet but other devices connected to it later do not get inernet connection.
When I connect my Debian PC using LAN Cable to the same router all devices work fine.
Does Ubuntu 10.10 allow you to resize your windows partition and install ubuntu on the resized partition? I'm trying to get ubuntu installed on my laptop but the only option it's giving me is to delete all partitions and install ubuntu. I don't want to delete any partitions because I have backups on my second partition and the first partition has windows on it and I would like to keep it.
I've tried 10.04 and it doesn't give the option for resizing but I thought that one of the versions gives he option for this, is it 10.10? I've tried to manually resize but it won't let me because I have to many primary partitions, so I would have to delete the last partition to get it changed to extended correct?
I am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
I have downloaded valgrind 3.6.1 from here. I want to install it, how to do it.How to install valgrind on xubuntu 11.04.This program is not in software center.I am already using code::blocks 10.05. Can i integrate it with codeblocks so that as i debug program in codeblocks valgrind called itself and show memory leaks.
I am running Valgrind on PowerPC target machine. I get the following error
Code:
==2848== Memcheck, a memory error detector. ==2848== Copyright (C) 2002-2008, and GNU GPL'd, by Julian Seward et al. ==2848== Using LibVEX rev 1884, a library for dynamic binary translation. ==2848== Copyright (C) 2004-2008, and GNU GPL'd, by OpenWorks LLP.
I downloaded the source for the latest valgrind and ran ./configure. It quits saying:
Quote:
checking the GLIBC_VERSION version... unsupported version configure: error: Valgrind requires glibc version 2.2 - 2.10
I've seen a slackbuild package for it. I'd like to have valgrind installed, but I'd prefer installing from source. Are unofficial packages the only way to go for the newest or newer release? EDIT: I meant to ask also, very important, what problems could arise from installing a slightly older version? I don't need a long, complex answer. Just off the top of your head, if it would be real stupid to do, let me know. I can google some time.
I have no idea what happened to my OS(ubuntu10.04).it doesn't give me any option to enter my login name & passwd.i just get a blank(default) login screen.last time when it worked,i was trying to install GTK+2.8,but due to my mistake i deleted glib using cmd (sudo apt-get purge glib)and after that i even tried to launch terminal but it failed to launch.also tried to play media files using vlc but it didn't work.so i tried to restart my os and finally got stuck in the problem.i have no idea what to do,please help.Is there any cmd to see what problem occurred or which package is missing.
I tried to install valgrind to my local directory (I don't have privilege to install it under root) by doing the following 3 steps:
(1) ./configure --prefix=/my/local/directory
(2) make
(3) make install
when I run ./valgrind ls -l as instructed by README, I got this error: valgrind: failed to start tool 'memcheck' for platform 'x86-linux': No such file or directory
If you install Smile (video slideshow creator) from Packman repository, you will probably find out that it doesn't produce any output file. This project is most probably dead, homepage is 404 and it's practically impossible to get any information about this program. Therefore it took me 3 exhausting hours to get it working Here is the solution: There is a missing fake.pl file, so you have to copy it to the right place, which is /opt/smile (for OpenSuse, for other distros it could be elsewhere, for example /usr/bin). You can obtain this file from the source package but as it is very small I post it right here to spare your time:
[Code].....
So create a new file /opt/smile/fake.pl and copy these lines into it. Btw. the original file from the source doesn't have the first line, but according to the tip from different forum it is supposed to be here. If Smile still doesn't work you might try to add some extra permission to fake.pl, something like chmod 755 /opt/smile/fake. And if it is still not working check the log file ~/.logsmile.txt This file is by the way also impossible to find, there is no sign of him in the documentation.
I'm trying to hook up my TV to my MacBook1,1 laptop running the Lucid Lynx Beta. The TV is connected to the laptop via a mini-DVI to DVI-I adaptor, which is connected to a DVI-I to video adaptor, and this is connected to the TV via a component cable.
Under OS X, after plugging in the mini-DVI cable, the TV automatically becomes a secondary display for the laptop (extending the current screen), so from a hardware perspective everything seems ok. Under Ubuntu, plugging in the mini-DVI cable elicits no response from XRandR whatsoever (xrandr -q reports DVI1 disconnected both before and after). URandR and the regular "Detect Displays" button in the "Monitors" preference app do nothing. The laptop has an Intel GMA 950 chipset, and the Intel driver is running successfully (Compiz works fine). I have a clean xorg.conf (generated by X -configure), except for the addition of "Virtual 2048 2048" in one of the SubSections of the Screen section. I'd be happy to post the full xorg.conf if it would be useful.
So far I have tried xorg.conf tweaks, and I have followed instructions to manually tell xrandr to output to DVI1 as described in the comment by Marko Mikulicic here.
For some reason on any application that uses sound, but doesn't allow me to specify the input/output audio devices I don't get anything. I want all audio to go to my USB Headset, and not the onboard soundcard. To start off with, here's alsamixer: Here's a screenshot from Mumble (voice chat) that shows that I've set the USB headset device in there, and it works 100% fine on Mumble.
[Code]...
As you can see from the alsa-base.conf above I've tried specifying snd_usb_audio as the default device, but it's not working.
i have a c++ program and i tried to run it using gcc command and it gives header files error i got the header file now but dont know where to place those files?can any one got the idea??? we could not place header files in usr/include folder!
I have a small audio problem: the Audio that exists from the back of my PC is working like a charm, but the one that cames out from the Frontal output doesn't work at all. It works well on OpenSuse 11.2, but it's not working on opensuse 11.3.
I have a script that uses cp to copy data from A to B. There are some troublesome files that are constantly in use and read "Permission denied" or "Text file busy" but I'm not worried about these. Therefore my copy process always contains output.The script runs through cron and the output (automatically) goes to /var/mail/user. I tried setting it up to send me an email and it comes through, but it's completely blank. The email in /var/mail/ contains the full output.
Here is my command: 0 18 * * * /home/backup.sh | mail -s "Backup completed" jsteel@...com (The script simply contains many "cp -r /mnt/location/a /mnt/location/b")
I am using Fedora 14 64-bit and after login through a user other than root when I try to open any folder on other partitions I get the message that I don't have permission to access such and such folders.
