Fedora :: So Many Xorg-x11-drv-* Files, So Little Space?
Nov 19, 2009
I can understand installing so many xorg-x11-drv-* files being installed, especially from a livecd. What I don't understand is why I can't remove the ones for hardware I don't have. For example, if I try to do a yum remove (or use yumex to do so) xorg-x11-drv-cirrus, it wants to remove xorg-x11-drivers.Now I understand that the -drivers file is a way to force all of them to be installed. Will it break anything if I go ahead and remove it along with the extra -drv- files?It is more than an academic exercise. I have installed Fedora 12 Constantine on my EeePC 900. Given the limitation in storage space, I would like to free up as much of it as I can so these superfluous video drivers need to go away. Since I don't want to break my setup in the process, I have not executed the command.
View 7 Replies
ADVERTISEMENT
Oct 14, 2009
I have a list of files in a directory which starts with - or have space.
I need to copy them back without the space or -?
linux1[sim]% ls linux1[sim]% cp ./-* ./*
View 8 Replies
View Related
Oct 23, 2010
I used to have a command that removed the *odd* characters from files and replaced spaces with underscores.
View 10 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
Jun 7, 2010
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies
View Related
Oct 8, 2009
Error: xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-catalyst conflicts with xorg-x11-drv-nvidia
I have followed the guide to install ATI proprietary drivers using RPM Fusion.
View 3 Replies
View Related
Jan 4, 2010
Logical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
View 2 Replies
View Related
Oct 13, 2010
I messed up my xorg file and now my pc wont start, when i boot ubuntu the display tells me that there is no input.
View 1 Replies
View Related
Feb 9, 2011
I opened this thread in Ubuntu forums with no luck at all. Hope someone can give me a clue of what happens.URl...Recently, gnome has been warning me about low disk space, always less than 1.5GiGs. The problem is, baobab (disk usage analyzer) tells me that there are something like 50GiG free. I am sure that I have the free space ( I can write big files ) but the system keeps reporting low disk space.
View 4 Replies
View Related
Jun 9, 2011
I am running Ubuntu 10.04. I am transferring roughly 62 GB of data libraries to my 84 GB /home partition. I'm using rsync because scp kept stalling, and I had to restart it over and over. Things were going great until recently when it began to show an error: "failed: No space left on device (28)" These are the things I've done so far: Used the GUI to find out how much I have copied so far: 5,149,552 which take up 30.2 GB. df -h, it tells me that my /home partition is 56% used, and that I have 33 GB available. (42 GB used out of 78 GB with 33 GB available) Also, none of my other partitions are anywhere near 100%. the /home partition is the most-used and it's only a little over half-full. du -s in the directory where I'm copying all of this: it also returned 42206500. Additionally, when I try to save screen captures, it sometimes fails with a "device full" error. What's going on? Am I really out of space? Why doesn't it show me that I'm out of space?
Is there a hidden temp file that rsync uses that just got too full? I did a little research on wikipedia and it said that ext4 has a 64,000 directory limit. Could it be that I somehow broke that limit with all of these files? Solution: not enough inodes for the vast amount of subdirectories on hard drive. This wasn't an RSYNC problem, rather, a partition configuration issue. To check inode usage: df -i If you want to add any inodes, you will need to backup your partition and format it using mke2fs (man mke2fs). Be sure to change the respective inode setting.
View 9 Replies
View Related
Jun 18, 2011
I found in my xorg.0.log the the xorg ATI driver is failing ALL options.
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[Code].....
View 9 Replies
View Related
Nov 10, 2010
I seem to be running low on disk space on my linux server. 'df' shows about 82% usage on a stock CentOS install with sendmail. I routinely delete old email directories, but for some reason, I stay pretty high in disk usage. Is there a fancy little bash script or something I could run that would find the biggest files and I could go get rid of them?
View 3 Replies
View Related
Jul 15, 2011
I have a bash file as following:
Code:
#!/bin/sh
deal_file(){
printf $1
[code]....
so the for loop spilt the file names if containing spaces, how can I fix the bug?
View 6 Replies
View Related
Jul 18, 2011
I use Linux. I coded a screenshot program some time ago and now I have 9 GIG of screenshots, 60000 JPEGs, most of them look pretty similar, and I have 300 MB of disk space remaining.
What are some good ways to start to compress batches of them (or all of them) in the background given the limited space? The problem with compressing the folder all at once is that I wouldn't have enough disk space for that. It seems the process needs to be broken down into chunks. So maybe something like: Get a list of all the files Add a chunk of the files (say, 20) to a compressed archive. Once it is done and saved successfully, delete the chunk of files
View 2 Replies
View Related
Aug 3, 2010
If I run low on free space, and I/system need to write something, then the files are just truncated. With no way to revert to their previous content.
First I installed the Windows on the VirtualBox, it sucked up all free space, so I couldn't even login to the system afterwards.
Then I, once again, silently ran out of free space, and my php editor broke. Later I discovered that it tried to write its config files, but failed, truncating them all. I lost a half a year of configurations, custom color scheme and custom code snippets.
Then one day the system just froze. Later I understood, there wasn't enough free space for it to run.
Today I was working on my php script, for like the second day, when, again, free space ran out, so with another file-save, I got a wonderfully impressing blank php-file. It was auto-reloaded from the external change, which was failure to write to file, obviously, so no ctrl-z worked, leaving me with two days work wasted and an urge to hit the monitor
My questions are:
1 How can this be fixed? Besides the obvious awesome fix "watch your free space, buddy".
2 Could somebody explain why these sorts of things happen, just so I know why the ultra-safe and durable 'nix operating system wants to destroy itself sometimes?
3 Anyone else encountered this issue?
View 3 Replies
View Related
May 31, 2011
After a power outage my external hard drive that I use to serve a DLNA server with content lost all the files.
The parent directories are still displayed, but there is nothing inside them, and I cannot write anything into them. (creating any file in them does not work.)
I assume that I have a corrupted drive but I was hoping to find a way to recover the content. Most of it is backed up, but I have become a bit lazy in the past month, and have not backed up so there are a number of videos I don't want to lose.
It seams odd that the directories show up, but the files don't. The drive properties also show that the correct amount of the drive space is taken up (for the videos to be present) so I haven't reformatted because I assume that will wipe out all traces of the data.
View 5 Replies
View Related
Jan 29, 2009
running ubuntu 8.10 amd64 on my HP intel 2.26ghz dual core processor, 320gb hdd and 4gb ram. My main problem is that when I dual booted ubuntu onto my laptop, I had vista already installed, so I only set aside 20GB of hard disk space for ubuntu, which seems like more than enough to me. What's going on is that it says I have used all my space and only have one GB left, when the only thing I have on my computer are word files and necessary installs like flash player, compiz, avant, etc.When trying to hunt down what was using all my space, first I checked out the disk usage analyzer (some pics from here in):theres my hdd with 1/19 gb remaining here's a breakdown of my home folder, showing that it's not using very much at allhere's my filesystem, now we can see that all the space is being used in the folder: /var
View 9 Replies
View Related
May 3, 2010
My main storage partition got full, so I'm deleting files to make room. However, df -k keeps reporting no space available on that partition (/disk). Here's the output of the command several minutes apart while another process is deleting a 30G of space:What can I do to make the space available immediately?
View 4 Replies
View Related
Oct 25, 2010
I have connected an another hard disk to my computer and mounted its drives. when I delete the files from second hard disk it is not increasing the free space. only 1.3 GB is left on that drive of second hard disk.
View 5 Replies
View Related
Jun 8, 2011
I have some confusion about one of my partition and the space it is taking. df -h output is given below;
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/ddf1_ADVDTARTINGp1
494G 18G 452G 4% /
[code]....
above information is showing that /var/lib/mysql partition total size is 379 GB and it is 68% used. However when I execute command du -sh /var/lib/mysql it shows following output.
# du -sh /var/lib/mysql
45G /var/lib/mysql
Now I want to know what files are taking space to make the partition 68% used. I want to list down all files in that partition with size.
View 8 Replies
View Related
Jul 27, 2010
I had this come up in logwatch: /dev/sda5 4.8G 3.6G 960M 80%/
Any ideas how I can find which files are suddenly taking up the space?
View 17 Replies
View Related
Feb 9, 2010
I have recently purchased an external hard drive in order to backup my home partition. In my PC I have a "1.5T" drive with several partitions on it, containing OSes and the home partition. The home partition is 1.3T according to df, the external drive contains one partition that spans the entire disk,df reports it as 1.4T in size. Both partitions are ext3. When I use rsync to copy files from the home partition to the external partition, the external disk becomes full, despite the destination - supposedly - being larger than the source. I don't understand why copying files from one partition to a slightly bigger partition should need more space than on the source partition. Does anyone know what is happening ?
Details : I created the partition on the external drive with gparted; gparted reported it the already have several gigabytes in used space immediately after the partitions creation - I thought at the time that this must be normal. The home partition contains many files of all sorts, including lots of big audio and video files. If you are wondering, for all my important files this external disk is only secondary backup, as they are also backed up to the "internet".
These are the mount points :
/mnt/tmp/ : home partition, /dev/sdb6
/mnt/external/ : external partition, /dev/sdc1
I used rsync to copy the files, I know there are more efficient ways to do this, but I wanted to use the same command that I will subsequently run to sync the backup.
rsync -av --progress --stats --recursive --perms --links --delete /mnt/tmp/ /mnt/external/
Next I tried adding the --sparse switch, as I was wondering if the problem may come form sparse files. I don't know however if rsync would go back and shrink the sparse file by just adding the switch and executing the command. I also added --one-file-system, for good measure. Here is what I ran next :
rsync -av --progress --stats --sparse --one-file-system --recursive --perms --links --delete /mnt/tmp/ /mnt/external/
I tried an fsck on the home partition :
fsck -f /dev/sdb6
This is the output from the last rsync :
rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32)
rsync: write failed on "abcd.avi": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(302) [receiver=3.0.6]
[code]....
Looking at the destination after a partial copy seems to indicate that the problem is not symbolic links being "expanded". I have not checked the source filesystem for sparse files, nor the destination to see if these files could be larger there, as this does not seem trivial.
Here is some additional info :
$ df /mnt/tmp/
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdb6 1415342836 1414173740 369096 100% /mnt/tmp
[code]....
View 2 Replies
View Related
May 18, 2010
I examined the problem, and determined that a huge amount of disk space is being taken up by files in /var/log/ The following files:
Code:
/var/log/messages.1
/var/log/kern.log.1
/var/log/daemon.log.1
/var/log/messages
/var/log/kern.log
/var/log/daemon.log
/var/log/syslog
are all over 1 GB in size. The largest is 18 GB. Together, they total 48.3 GB. I restarted the system, forcing a fsck.
View 3 Replies
View Related
Feb 2, 2011
I started getting errors about running out of disk space in root this morning. I hunted up what's taking all the space; var/log is 39GB (Ubuntu is installed on a 50G partition.) It's specific files that live in that directory, not subfolders. The files are:
kern.log = 11.6 GB
messages (plain text file) = 11.4 GB
kern.log.1 = 6.1 GB
[code]...
View 9 Replies
View Related
Aug 3, 2010
i'm sorting 8GB text file but came up with this error for an investigation
/tmp/sortA3aLjF: No space left on device
is there anyway that sort won't use /tmp?
View 3 Replies
View Related
Aug 11, 2010
i need a way to convert the containers of PHOTO`s and AUDIO`s files to minimum space as possible
for example .wav to .mp3 and photo to convert to .jpg
prefer to use the command line in order to write a script
View 3 Replies
View Related
Sep 7, 2010
My /var/ partition continues to fill up on all my servers, and it is because the logs in /var/log/apache2 or /var/log/mysql are being deleted during log rotate, but their file handles are being held open. Thus, a "du -sh /var/log" shows the correct values, but "df | grep /var" shows something much different.
It seems that the log files rotate, however if I run "lsof | grep deleted" it returns lots of files that are no longer visible in the directory, however refuse to clear themselves off the disk.
The only way I have found to make these log files go away (and thus clear up the disk space on the partition I should have) is to restart either apache or mysql, depending on which process has huge sized log files being held open.
Is it just me, or is this a big flaw in the way linux works, that it can't figure out how to release file handle for a log so the disk space can be reclaimed? This is happening to me a lot lately.
Here is some output from one of my web servers so you can see what I am seeing...
root@web49:~# df -h | grep /var$
Filesystem Size Used Avail Use% Mounted on
/dev/sda8 9.2G 6.1G 2.7G 70% /var
root@web49:~# du -sh /var
[Code]....
View 9 Replies
View Related
Mar 13, 2011
I used photorec to recover lost files and it brought up 70gb worth of files, when I was done looking through them I deleted these files. but these files still seem to be taking up my disk space. When I try to access my trash bin with root I get a message that reads...."The folder contents could not be displayed. sorry, could not display all the contents of "trash": operation not supported." if I open my trash bin when I'm not in root, the bin is empty.
How do I free up my disk space?
View 8 Replies
View Related
Dec 22, 2009
After running photorec I went from having ~30 gb of free space to having 0 bytes of free space. I have deleted all the results of photorec and various other large files and removed them from trash but it still has not freed up any space. Also, my firefox no longer has back/forward functionality which I'm sure would be fixed by a reinstall but seeing as I have 0 space, I can't really do that. Any thoughts?
View 7 Replies
View Related
Feb 26, 2009
Is it possible to import an xorg.conf file from Debian to Fedora and have it work? The reason for this is that I have an older monitor that only offers 800x600 as the maximum resolution.
View 2 Replies
View Related
