Shutdown hangs after recent update(s) and will not power off, requiring use of manual power switchHave tried the following ..1 # shutdown -P now .. in terminal .. same result2 Disabled selinux .. same result
View 6 RepliesAfter yesterday's update (which included some KDE components) Skype won't start anymore and just leave me with this error:
View 12 Replies View RelatedJust got today's F12 updates, which included changing Firefox, Thunderbird & Lightning from Beta to full releases (FF=3.5.6; T'Bird=3.0; Lightning=1.0-0.16.20090916hg.fc12.x86_64). My remote calendars from Google come up fine but my local "home" calendar now gets the following errors:
Error: Error updating timezones: Error: mozIStorageStatement::step() returned an error
DB Error no such column: recurrence_id_tz
Error: [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE)
[code]....
A couple of weeks ago, I went to run a yum update, but got this message:
Loaded plugins:
I've been running yum with --skip-broken since, but I'd like to know what package I need to get to the service level that xulrunner and firefox need. I'm running Fedora 12.
This has been bothering me for a while. I thought if I waited a dependency would get fixed and the update would work, but it hasn't for a while now. I have included the error when trying to update gcc and the libraries. Skip broken skips everything so no dice there.
View 1 Replies View RelatedAfter yesterday's update yum is not working under Yumex or terminal also Thunderbird is not connecting to gmail IMAP. This is the error from yumex:
Code:
22:12:08 : Yum Config Setup
22:12:09 : Loaded plugins: protectbase, refresh-packagekit
22:12:09 : Setup signed metadata support
22:12:09 : Yum Version : 3.2.23
[code]....
There is a problem with dependency resolution for the recent updates; i can't update my system even with the skip-broken, there is something to nautilus and phyton-devel and phyton, pls, take note of these.
View 3 Replies View RelatedI've just installed 100+meg of updates and rebooted only to find that when I login the desktop fails to boot. Opening a root-console, I killed Compiz which dropped me back to the login screen where I logged-in again with the desktop starting successfully. From there I disabled Compiz and have no problem starting the desktop now. But that's not really a solution.Even stranger, if I now try logging in with and older kernel version and with Compiz off - if I try enabling Compix now, the desktop just freezes - it also fails to complete loading the desktop. So both the current-kernel/Compiz seem to be linked to the problem in some way!Has anyone else experienced this, and is there a solution? I miss my desktop-effects!
View 2 Replies View RelatedWell, here are a list of the symptoms.
In add/remove software:
- No packages appear
- Sources pane is blank
Trying "yum update":
Gives the following error.
Code:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: libssl.so.8: cannot open shared object file: No such file or directory Please install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
Additional info: Last update in log is from march 11. But has nothing to do with yum, ssl or python.
A recent (last couple of days) update to Fedora12 involving libunicap seems to have completely trashed VLC video player -- as in causing it to be completely uninstalled. No biggie, I thought; when I went to reinstall it, I saw that VLC 1.0.5-1 fc12 was available. Tried to install it, and KPackageKit calmly proceeded to throw up, telling me:
Test Transaction Errors: file /usr/lib/libunicap.so.2 from install of unicap-0.9.5-3.fc12.i686 conflicts with file from package libunicap-0.9.8-1.fc12.i686
file /usr/lib/unicap2/cpi/libdcam.so from install of unicap-0.9.5-3.fc12.i686 conflicts with file from package libunicap-0.9.8-1.fc12.i686
file /usr/lib/unicap2/cpi/libv4l.so from install of unicap-0.9.5-3.fc12.i686 conflicts with file from package libunicap-0.9.8-1.fc12.i686
file /usr/lib/unicap2/cpi/libv4l2cpi.so from install of unicap-0.9.5-3.fc12.i686 conflicts with file from package libunicap-0.9.8-1.fc12.i686
file /usr/lib/unicap2/cpi/libvid21394.so from install of unicap-0.9.5-3.fc12.i686 conflicts with file from package libunicap-0.9.8-1.fc12.i686
file /usr/share/locale/fr/LC_MESSAGES/unicap.mo from install of unicap-0.9.5-3.fc12.i686 conflicts with file from package libunicap-0.9.8-1.fc12.i686
Wonderful. Now I don't have a video player that natively does mpg/avi; Dragon Player pretends to play them, but there's no video; same with Xine. BTW, I tried to report this via Bugzilla at Redhat, but couldn't find anything that resembled a way to report an actual bug/problem (what app doesn't work, how it doesn't work, any error messages).
Problem surfaced roughly 2 days ago (March 6th, 2010). When laptop lid is closed, and then opened, the screen remains black. Hard reboot is usually needed. Problem occurs when behavior setting is set to close laptop lid -> suspend, and also when setting is set to close laptop lid -> blank screen. I haven't tested under other settings.
Expected behavior: gnome login prompt appears. Please note that the expected behavior occurred consistently until a few days ago. Additional details:
Intel driver.
Fedora 12.
GNOME.
Thinkpad T60.
After i updated to the kernel version 2.6.34.7-61.fc13.x86_64 my wireless stopped working!
My network card is a Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)
The interface is not listet anymore under ifconfig, under the network icon i see only wired networks.
If i boot using the old kernel (2.6.34.7-56.fc13.x86_64) everything is fine.
when i run lshw -C network i can see that the driver is not loaded correctly
Code:
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
[Code]....
The problem is that yum is refusing to install gcc on a new SL6 install. As far as I can make out, a security update that I applied prior to my attempt to install gcc has caused problems. I did a new SL6 install (x86_86) a couple of weeks ago. This was a minimal installation, and I didn't install any dev tools, as I intended to install them later from yum. Since then, I've done very little; I installed a few packages (samba, xemacs, etc), and I let the system update itself. The update installed 'kernel', and updated 'kernel-firmware' [URL]. I now need to install the dev tools (g++, and so on), but I can't. I've tried this from gpk-application, and directly from yum. The complete yum output is below, but the basic error is:
> Error: Package: glibc-2.12-1.7.el6.i686 (sl)
> Requires: glibc-common = 2.12-1.7.el6
> Installed: glibc-common-2.12-1.7.el6_0.5.x86_64 (@sl-security)
[code]....
I am running Fedora 12 with KDE on an Acer Aspire One netbook.
A recent update has caused the KDE shutdown/restart/logout buttons (found for example through the Fedora -> Leave menu or by pressing the power off switch)to stop working. I am having to shutdown using shutdown -P now command.
So I have the following questions:
a) Has anyone else had this issue and knows a workaround/fix?
b) Does anyone know what package these belong to so I can try an older version?
c) Does anyone know where this package writes its logs, or if I need to install anything for it to do so so I can have a look?
d) Does anyone know the command-line interface to these commands - that may give me either a more gentle workaround than shutdown -P now, or some insight into why the command is no longer working.
The kernel-PAE-2.6.30.5-43 upgrade will not boot on my Dell 1545 notebook. The initialization stops and the systems freezes right at the point that the login prompt should appear. I do not have invidia drivers. I have Intel video drivers. Also there is a loud 'pop' in the sound system early in the initialization sequence. For the time being, I have removed the 2.6.30.5-43 upgrade via yum.
View 8 Replies View RelatedI just rebooted my netbook after updates this last week and notices the wireless is broken now. The updates updated my kernel and wl modules. I'm using a broadcom 43224 driver.If i reboot to the older kernel the wireless works.
View 5 Replies View RelatedWhen i am updating the following error is coming:
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
By using yum update --skip-broken i am able to update only some applications
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
For reasons that I do not understand, the xfce indicator applet has stopped working. It's not visible, so I cannot see thinks like the wireless applet.I can't find anything from searching the net.I suspect that it has something to do with dbus.Perhaps it's related, but whenever I choose to shutdown or restart, it now goes back to the GDM login screen instead. I've had this problem before on earlier Ubuntu distros, but I don't remember how to fix it.
View 2 Replies View RelatedI started the upgrade to 10.4 from 9.10 through the update manager. It started the update to 10.4. After downloading almost 95% of the update, it gave an error message of "could not download certain components. downloaded files will not be erased" and stopped the update. I restarted the PC, and started the update manager again. But now it does not show any option of update to 10.4. how do I continue or resume the update process? I just started using ubuntu about 15 days back. So, I am relatively new to this.
View 3 Replies View Relatedim on mint 10 and when I run Update Manager i get this
Code:
W: GPG error: http://archive.canonical.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://security.ubuntu.com maverick-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
[code]....
Jaunty Jack - 9.04. Ran update manager last night and ubuntu-one client failed as part of the upgrade. At a loss as to figure out how to fix this. I have removed the ubuntuone-gnome-client and re-installed from the website but now luck.
View 9 Replies View RelatedRecently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
Initially installed 5.3 on a 64-bit platform and was able to compile just fine. Foolhardily updated to 5.5. Somewhere in that process I lost the ability to compile even the simplest "hello, world" C program.
$ gcc hello.c
In file included from /usr/include/_G_config.h:44,
from /usr/include/libio.h:32,
from /usr/include/stdio.h:72,
from hello.c:1:
[Code]....
I have an offline machine and the full 8 DVD repository set and have added them to the system and they work fine to install packages. I used jigdo to download the update 6.0.1 DVD and the "packages" file and the one inside of "packages.gz" are empty files. This prevents the disk from working at all. I'm not sure who to report this to.
View 4 Replies View RelatedOn my opensuse 11.2 pc, the Decmber 3rd KDE 4.5.4 update proceeded to install all updates except libkdecore4 (and maybe others). libkdecore4 now has a dependency on liblzma5 which is not available. The result is an all white desktop with boxes where the widgets should be.
I found this bug report: [url]
But I can't find liblzma5 in the repository that is listed in the 2nd posting.
Code:
opensuse 11.2 64Bit.
I'm using KDE and after some update GStreamer seems to be broken. Firstly it was unable to play sound at all, and I've got around this by changing Phonon preferred engine to Xine. But Clementine is still unable to play with error message:
Clementine Error
GStreamer could not create the element: volume. Please make sure that you have installed all necessary GStreamer plugins (e.g. OGG and MP3)
I've already read this and this topic, but none of the things, proposed to try, worked for me.
I want to fix this annoying thing with ppa keys broken. There was a script named launchpad-update that used to do that for you, but everything I find is for pre karmic. Is there any alternative to that script? Any way to do it manually? Some programs I installed are not getting updated and I'm having to add new ppas manually..
View 2 Replies View RelatedAfter doing a update in ubuntu 10.04 this is the message I get: E: /var/cache/apt/archives/libimobiledevice1_1.0.6-1ubuntu1~lucid1_i386.deb: trying to overwrite '/usr/share/hal/fdi/information/20thirdparty/31-apple-mobile-device.fdi', which is also in package libimobiledevice0 0
How can I recover from this? The problem is made worse because I can not install any software because of a broken package on the system use broken filter to locate it I don't have any clue
I'm just getting back into Linux after (quite) a few years away; from Fedora Core2/3. Trialling Ubuntu Natty with Unity and Linux Mint 11 running for 2 weeks.
So last night I clicked on the (Mint 11) Software Update Manager - a small shield appearing on the taskbar which listed about 30 pkgs to be updated. I've no idea what all these lib-xyq-012 files are but I thought, well the system is basically asking me to update my system, so why not?
A few minutes later it finished, and I went to my VPN connection but nothing happened. I rebooted and noticed some errors displayed during shutdown but I didn't catch them.
After reboot:
a) date time has disppeared from the taskbar
b) network connections icon disappeared from taskbar
c) no internet connection at all!
d) menu --> system --> network manager --> (nothing happens)??
If anyone has some idea what I could try? (install Natty might be a valid solution at this point). I searched the forums but couldn't see anyone else had this issue (is updating recommended updates from software update manager not a good idea?)
I don't have internet it's difficult to use the usual "google-and-resolve" approach, I have to keep booting back into WinXP.