my user are not able to send mail, in my mail server this error is showing ,
[root@aloha ~]# service MailScanner restart
Shutting down MailScanner daemons:
MailScanner: [ OK ]
incoming sendmail: [ OK ]
[Code]....
Im using fedora 7 , i dono which all services has started .
How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View Relatedhome web server (running on port 21333). i'm running fedora 10 w/ LAMP and I can't get my php contact form on my website to send out mail. it looks like it sends but it doesn't (and I know the form works because it's the same one from my hosted web server). I've tried everything I can think of, disabled selinux, added apache to trusted mail users, changed the port to 2025 in case comcast blocks 25 (at least i think i did), added the port to the iptables and i have no idea where to go from here.
View 4 Replies View RelatedI have Linux mail server, It always encounter this problem, when i shut down or restart the server. You cannot receive mail but you can send..i use the following services:
iptables -F
service iptables restart
service sendmail restart
[code]...
I have installed a sendmail server on fedora 10
I try to configure my sendmail server as a mail server to send outgoing email using port 587( because port 25 is blocked). after finishing configuring my sendmail server, i checked out my sendmail server using telnet localhost 587, and it worked fine as below code...
I have tried two different ways for user name: name, or name@mail.mydomian.com, but not working at all, the two results are the same.
PS: I have test port 587 and can use port 587 and Kmail to send outgoing mail using other external relay server
is my wrong configuration for sendmail server or kmail?
We host our own mail server on our Fedora box. We would like for our field people using there smart phones to be able to send and receive mail. Receiving is no problem but sending creates problems with relaying and port assignments. Is there any way sendmail can be configured to allow these mobile phone users (AT&T, Verizon) to send mail through our server?
View 1 Replies View RelatedI set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
I want to restrict to send mail for particular allowed users of UNIX user. How can I achieve that? Which file I need to configure to allow users to send mail?
View 12 Replies View Relatedi have ipA -> web server
and ipB -> mail server
when i send a mail from outside the user receives it but when i send it from my web server in mail logs i get the following error
relay=[127.0.0.1] [127.0.0.1], dsn=5.1.1, stat=User unknown
I am using Qmail mailing system. Now I want to block the outlook users to send mail(SMTP). I think it can be done through qmail smtp relay option.Is it the right way to block SMTP for outlook users??
View 3 Replies View RelatedI handle several hundreds of domains. Mails are handled with google apps (but previously I used to have a full postfix/courrier setup with virtualhosting). Now what I need is to be able to send mail (newsletter etc...) from my web servers, but I don't need to receive mail on these servers.
View 4 Replies View Relatedi have install and configure the qmail server in centos 5.4 and its working fine. i have created the domain (ex - abc.com)in qmail server and also create the user and its working fine. but i am not able to send the mail which user not found in qmail(abc.com) server, which are created on the web (at isp side or pop user)
View 1 Replies View RelatedI have setup a mail server on my remote Ubuntu 10.04 server using postfix.
Using Putty to SSH to the server, I can send mail, check mail, and the server accepts mail from other domains (gmail, yahoo, hotmail etc).
However, I cannot seem to send mail using PHP functions.
I have created a "test.php" file with the following contents:
[Code].....
When I run the .php file, nothing happens, and nothing logs in the mail logs, so I'm sure the server doesnt understand the mail command in PHP files, but I'm not sure how to go about fixing it.
Apache2, PHP5, postfix, and the additional necessaries are installed (this is a webserver/mailserver on 1 box)
I tried to send mail from my debian system commandline as root user But i did not get the mail in the destination email inbox No errors was shown
View 1 Replies View RelatedThe thing is we have 2 servers one is bugzilla + proxy other is mailserver (internal)
The thing is when my dev team files any bug the bugzilla can't send mail to a user user@test.local.com
P.S:i am actually having problems since the sudden power cut and server restarts
the local mail server is having zimbra package installed
I am attempting to get mail working on a server, and having some trouble. I'm working with sendmail, and I am to the point where I can send and receive mail on the server (from one user account to another), but I cannot send mail from the machine to somewhere else (specifically a Google Apps GMail account). When I try to send mail to the gmail account, I receive a "Undelivered Mail Returned to Sender" message. I've never managed any sort of mail server, and so far searching the internet hasn't helped me.
View 3 Replies View RelatedI have a server with a static IP that I use as a sendmail server. The problem is that port 25 is exposed. As a result, anybody can login to the SMTP server and send mail from my domain as a user that does not exist as well as email from other non-existant domains. I'm sure there are sendmail options that I can enable to do some checks, like if the user exists on that server or if the domain is the same on the server, etc. I was wondering if you guys can mention a few that I can add to my sendmail.mc file?
I have thought about auth login, the problem is if auth login is on my public port then I won't be able to receive email from gmail because it would be unauthenticated. Also, I only have 1 mail server. I know the ideal solution is to have 2 mail servers. One for outgoing mail/internal mail server where you can enable auth login and the other for incoming mail which just acts as the relay to the internal mail server. That way spammers can't login to send mail out. That's another question I had, how do I configure sendmail to only send email out/in?
Anyhow, so I have to make do with 1 mail server for now. So I decided to add a few rules on iptables. I grabbed the IP range that gmail uses when I receive mail from then and added it to my iptables with the following command.
[Code]....
I am trying to make my elastix voip server to send and receive e-mails. It has built in Postfix mail server, and i tried to configure it.I am not sure about some parameters, such as domain and hostname.Either way, i will attach my config file and the errors that i get from log and mail queue as i get them from webmin.
View 7 Replies View RelatedI'm on Ubuntu 10.04 and using Postfix 2.7 with Dovecot's SASL. The issue is when sending e-mail it takes a bit of time to send. LIke for it to get connected it takes around 15.20 seconds. How can I reduce this delay so it can be sent faster?
View 2 Replies View RelatedI have spent the last 24 hours searching the internet for an issue to resolve my problem. I have tried the verious solutions posted by people and followed endless amounts of tutorials
In the end i followed [URL] line by line
This allowed me to recieve email fine, but only send email locally.
I either get a "Relay access denied" message, or as of last night is is now "Recipient Address Rejected"
Below is a link to my Main.cf file
[URL]
Every time I try to send a message with SquirrelMail, I get:
Code:
Message not sent. Server replied: Syntax error in parameters or arguments 501 5.1.7 Bad sender address syntax
Let me start off by saying I am experienced with computers, though my knowledge of Linux and networking is limited. I've just recently started setting up a Ubuntu 10.04 server to be a SMTP server. I've followed this guide by the letter: [URL] What I've attempted, to test the server, is the following:
telnet localhost 25
ehlo localhost
(this returns all the desired information) I then do a MAIL FROM my domain which is accepted, and try to do a RCPT TO an external mail server (gmail) to test sending an email. I am then told 'Relay Access Denied'. I'm sure that there's something fundamental that I'm either not understanding or not doing correctly. I simply want an SMTP server that can send to other domains. What do I need to do?
I'm running a server with Ubuntu 10.04 and I have installed postfix and courier. The server can recieve mail and I can fetch them using POP, but when I try to send mail it doesn't work. Postfix itself can send email if i telnet from localhost and I am using my ISP as a relay because they block port 25. I'm using outlook 2007 on my client computer and it just says that the server rejects the login attempt and tells me to check my username and password. Postfix listens on port 12 as well because the client connection also has outgoing on port 25 blocked. I have tried to use telnet to connect to the server, and I can connect. This is what I get:
[Code]....
Now what? I've tried searching for the answer but all I can come up with is AUTH PLAIN or AUTH LOGIN, but I don't know what to type after that.
How to set crontab not send mail notification to the owner script if the script success running? because I'm monitoring mail server, and notification from cron is not necessary for me. I'm using ubuntu 10.04 server
View 4 Replies View Relatedim looking for a program that lets me monitor server remote a check if apache is running and if its not send out a mail pretty much something like the Big Brother projeckt was before they went comercial i found a few projekts but most havent been updated for years anyone got a clue on any active projekt that does this?
View 1 Replies View RelatedI want to configure a single mail server to send and receive mail from multiple sub domains of my domain. I've already installed Postfix/Dovecot and it is perfectly working for mydomain.com. And also installed roundcube for Web Mail. Can I further customize this setup to process mail to sub domains? ex- someone@subdomain1.mydomain.com, someone@subdomain2.mydomain.com, someone2@subdomain1.mydomain.com (someone@subdomain1.mydomain.com and someone@subdomain2.mydomain.com are 2 separate users. they should be able to log on to web interface separately)
Currently i use system account names as email user names. (ex - systemusername@mydomain.com). The only MX record in my domain DNS pointed to current server (mailhost.mydomain.com). I read about postfix virtual domains. but couldnt figure out how to use it to achive my target. I do not need configuration details. Just explain me the way to do it. I can do the rest my self.
Can anyone tell me what the pros and cons are between heirloom-mailx vs mailutils? This is for ubuntu 10.04 LTS. AT this point my only purpose is to use the mail command line program to occasionally send log output to email aliases.
View 2 Replies View RelatedI am trying to send e-mail from command line by using "mail" in fedora. It goes to e-mail server in the same network but it is refused by other outside this network with message: "..... Connection refused by name@yahoo.com ......
View 1 Replies View RelatedWe have a backup program that works with HP's ultrium tapes that whenever it's failing it's sending an error to the root's system logs. Now if I run mutt as root I can see the system logs and it's very easy to pinpoint any backup error messages.
Is there any way to copy all these system messages to another user as well so that someone with no root access could run mutt as well and check for these logs daily?
I used this tutorial to setup to setup iSpconfig postfix courier: [URL] but i cannot send or receive email:
[Code]....
Basically when i create users in ISPconfig, something goes wrong, mysql is running and i have postfix-mysql installed and running too.
[Code]...
