i want to build server ; for blocking porn site and adult content through my netbook.can someone please give me instruction for building that server using netbook?
View 3 Replieswas originally looking to setup some kind of NAS in my house due to the fact that me and my wife both access the same music libraby, photo library etc. and was looking at one of the IcyBox enclosures.I realised that whilst this was a quick and possibly easy way to set something up, it wasn't in keeping with the true geek within so decided to look into setting up a full RAID5 file server. This would then allow me to install and setup various other services such as Web and FTP server, Mail server and DNS server should I ever want to.
I have an old machine (Duron 1GHz I think) with 1GB ram but the only problem is that is doesn't have an on board SATA controller so I was wondering what PCI SATA controller cards work with Fedora? Doesn't need to have RAID capabilities since i'll be using Software RAID anyway, just need a nice cheap Fedora friendly controller card that'll do the job.
I've been running my dedicated server on Ubuntu 10.04 for 300 days non-stop so far (touch wood). I'm planning to purchase a dedicated server to host many large sites. The specs are Sandybridge Xeon with 16 bay x 2TB storage using RAID5 (Adaptec RAID 51645).I don't have experience with RAID, but I read that ext4 can only support filesystem up to 16TB, my plan for the system is to have 32TB of storage. How can I make Ubuntu run this configuration?
Also, can Ubuntu 10.04 recognize the Adaptec card? Going through Adaptec website there is no mention of drivers for Ubuntu (although many other distros are available).
I need some advice or tips or maybe your own experiences about building a home data storage or NAS.Here's some thoughts / requirements I think it should have:It should expandable. I'll stick a couple of 1TB HDDs and a little later I'll stick some moreIt should easily integrated to both Ubuntu and Windows 7. Ideally it'll be an integrated part of the filesystem.I'm thinking some sort of RAID as a backing up my data. RAID 1 seems like a such a waste but then again, these days, HDDs are cheap.And when I do add more HDDs, I'd like them to appear as one big storage unit instead of separate drives.Any suggestions and tips on how to go about this is welcome. Questions are plenty: should I go with server hardware or is bigger ATX case and standard hardware enough? I'll need some pointers so keep 'em coming
View 9 Replies View RelatedI don't care so much the practicality and needlessness of actually setting up a computer for proxy server for personal usage, but none-the-less, i want to do it, and i'm just wondering about hardware.The proxy, i don't intend on having a desktop environment, so it'll be a terminal interface.But for a system that will handle traffic for 3 pc's and a ps3, how much hardware would one suggest i need, as far as RAM, HDD space, so on and so forth.
I was thinking it would be fun to do with with my old amd k6-2 processor and it's 32mb of ram, but in order for that pc to work, i'll need to replace a few hardware pieces, and before i dumb money into it and pull it out of the closet, i want to find out if it would even be worth my time to do it.
Is there a way to show or count how many CPU instructions a particular process is using or uses?
In my work we develop a web application and I'm responsible of maintaining the web server.
The app lets you handle data online so each client that uses the web application has a folder associated to it, where his data is stored. (/var/www/html/test) for example.
The idea is to get how many CPU instructions the httpd process for that particular folder is having. Is there a way to do this?
I need to build a cert from an CRT file/
View 1 Replies View Relatedmy firefox has been crashing since yesterday and when i tried to run yum update it gives me error: illegal instruction (core dumped)
View 7 Replies View RelatedI have a few mail servers, a mail log server and a web server running on Centos 5. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves.
I have already installed VMWare Server 2.0 I have a few questions: How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program? How do I actually do this cloning? Is there a tutorial on how to do this?
While building my new server I grinded ta hold shortly after inserting the FDR10 DVD.
Hardware:
Chenbro es34069
Albatron KI690-AM2
AMD Athlon X2 64 4850E
IDE 2.5" HD (master)
IDE Slimline DVD (slave)
4x SATA II swap (still empty)
It stops at the message "net: Registered protocol family 2" but in one of my desperate attempts I changed almost every setting in my BIOS (updated to 1.07) and all of a sudden it passed on. Stupid enough I figured it would be a small effort to find the setting and figure out the problem, so I changed them one at a time after loading the defaults....
I'm trying to install Fedora 14 on my netbook using a network PXE server on my laptop. I can see in the syslog, that initrd.img and vmlinuz get sent over tftp. The problem seems to be in my kernel parameters:
LABEL fedora14-EFI-boot-i386
kernel /images/fedora14-EFI-boot-i386/vmlinuz0
MENU LABEL fedora14-EFI-boot-i386
append initrd=/images/fedora14-EFI-boot-i386/initrd0.img ksdevice=bootif lang= kssendmac text ks=http://192.168.2.1/cblr/svc/op/ks/profile/fedora14-EFI-boot-i386 selinux=0
ipappend 2
On booting up the netbook it can't find a root device. I'm not sure what to specify for the root= because I have deleted all the partitions on /dev/sda. I did this because originally it kept booting up the old OS, and I assumed there was a way to format the disk as part of the install. I'm stuck now and was hoping someone with more experience of bootloaders might be able to help. If possible I'd like to do this using the network rather than a usb.
My scenario is based on Ubuntu server guide, can be found at [URL].. Step 1: I do as chapter 6, install OPENLDAP server, populating LDAP => run ok. Step 2: do as LDAP Authentication section => run ok. Step 3: Install samba => ok. Step 4: do as OpenLDAP Configuration section => there's a problem here: when I run the command:
Quote:
ldapadd -x -D cn=admin,cn=config -W -f /tmp/cn=samba.ldif.I can't login to LDAP server, it said that:
Quote: ldap_bind: Invalid credentials (49)
I am sure that the password is correct, but I still receive this message
I'm looking at building a small NAS setup for my home to hold all my media (DVD's, pictures, music etc..). I'm not too concerned with backups of it at this point as I have all the data elsewhere as it is, but would like one central spot to access it.
A friend of mine turned me on to Ubuntu to do this with but he's never tried it, so I'm looking to see if anyone else has done this or if there issues with it. I've used linux off and on for several years, but this would be my first Ubuntu install.
I'm looking at either using some older hardware I have sitting around, or something cheap like a small dell server (T310 or something). I'd get 4 2TB drives and just use them in a software raid 5 array. It would be accessed with a few different samba shares I'm thinking.
I burned the Slackware 13.1 DVD disk, and installed on a desktop, and it worked really great. Now, I would like to install 13.1 on my laptop, but my DVD-rom doesn't work. So is there any instruction for me to upgrade from slackware 12.1 (currently running)to slackware 13.1 directly, like what states in "Slackware 13.0 to 13.1 Upgrade HOWTO" ? Alternatively, is there any way that I can install slackware 13.1 from the ISO image file on my Windows partition? or I just following the instructions off this website, [URL]
View 1 Replies View Relatedi need to limit summary working time at system. I tried use limits.conf for this. If only two lines would be thereQuote:TestUser soft cpu 10estUser hard cpu 20 So user TestUser can login at system at any time, work any time period, and when summary time of all its logins reaches 20 mins all his proceses would be killed?p.s. if i am wrong in method whith which i try set time limit for user,
View 8 Replies View RelatedInstalled new wireless modem and router. how to connect it to my Ubuntu operating system. So far I can only find a place to enter information but don't know where to find it. It asks for "SSID"-"Mode Infrastructure"-"BSSID"- "Device Mac Address "Cloned Mac Address" and "MTU Automatic". where to find this information or if I am even in the right window to setup this new modem.
View 2 Replies View RelatedI'm reading "Understanding the Linux Kernel" and came upon this assembly instruction:
movl $(__KERNEL_CS << 16), %eax
I am curious as to what "<<" means/does. I tried to gooogle, but google doesn't search for "<<".
I am getting Illegal instruction error commands like yum:
I have centos 5.3
I am trying to figure out the best server configuration for the following:Low power (I want to plug the server in and forget about it)High redundancy of data (I don't want to loose my music and documents!)The ability to stream music + movies to laptop (maybe subsonic or Jinzora)VPN server with IPsec or OpenVPN NAS $800 budget 2TB with ability to add more drives :Unix Server with software RAID (maybe RAID6)
VPN setup on virtual OS via VirtualBox
NAS setup on virtual OS via VirtualBox
My Questions:What would be the best raid configuration if I wanted at least 2TB of data and the ability to add more disks when the space begins to add up?What would be the best OS to use for setting up a software RAID (is a FakeRAID a better solution)?Does it make more sense to separate the VPN and NAS with different OS's?My goal will be to access my data from any computer from anywhere but mostly just my Laptop from work.
my workplace is switching from Oracle app server to Tomcat. I've never been a sysad, and never administered an app server. So that part is going to be completely new to me.ortunately, I don't have to be the primary on this - but my manager is encouraging me to learn the setup and how to do the job.So, my situation is that my test "server" is a P2 with 256MB of RAM. I know I'm not going to get screaming performance out of it, but all I really need it to do is run my web server and file server to support my Tomcat install on a separate box (P3, 2.8GHz, dual-core with a gig of RAM).
I'm not really a n00b to Linux, so building the system isn't a stumbling block. Which distro, and which version of that distro, is a stumbling block. I know ubuntu is easy to set up, and very popular. If I went that way, should I get the desktop version? Or the server version? I *want* the GUI, but don't require it. And I'm not real certain what they're referring to (hw or sw) when they call it "desktop" or "server".I'm not looking for a challenge to broaden my horizons in terms of my Linux knowledge - I just want something I can set up quickly so I can get on with learning what I need to about the server installation, configuration and administration.
I had created a database named details with the following table.
create table details_of_all_jobbers (
Sr_No int NOT NULL AUTO_INCREMENT,
First_Name varchar(50),
Middle_Name varchar(50),
Sur_Name varchar(50),
Mobile_Number varchar(50),
Date_of_Birth varchar(50),
Address varchar(100),
City varchar(50),
Pincode varchar(50),
Status varchar(50),
PRIMARY KEY (Sr_no));
I want the insert page, view page, update page, delete page which is coded in php so I request you to give me the code for building the site for me.
I have builded my kernel through wiki manual, BUT, the kernel-headers rpm-package has not been builded. Now i have only two packages: kernel and kernel-devel. Is that ok? (i think, that it is not ok, because when i build the same version of kernel on x86_64 platform, after rpmbuild command i have kernel, kernel-devel and kernel-headers packages) My CentOS version is 5.2; platform i686; kernel, kernel-headers, kernel-devel packages 2.6.18-92.el5.
View 6 Replies View Relatedmy SheevaPlug just died, and I need to look for new device to replace it. My goal is to build a fanless, low power consumption, linux server. Currently I am thinking of purchasing a QNAP NAS device (TS-110 model) and installing Debian on it.
View 2 Replies View RelatedI have 50 identical workstations that are being dropped shipped from the vendor directly to the remote locations. I need to install a identical configuration, including installed packages, scripts and customize configuration onto each of this workstations. I cannot set up a kickstart server to install from remotely because of my organizations security policies. Not to mention that it would be painfully slow. I thought about DD-ing my "Master" build and sending it to the remote sites, but some of the admins are not very Linux savvy. I would really like to build a bootable DVD that would install the cloned Master build from my server to theirs. I was looking for something that would look like Anaconda to the person installing the image. If I could get them through this base install I think it would be easy to document how to change the workstation unique parameters or value. How to accomplished this? BTW, this will be a RHEL 5.3 server install.
View 2 Replies View RelatedI'm trying to turn an old Acer Aspire One with a tiny 8GB solid-state drive into a lean web server, so I'd like to remove as many packages as possible to free up space. It will be running a standard LAMP install and nothing else. Right now it has Ubuntu Netbook installed, so I need to know everything I can delete and still have it boot and run mysql, apache, etc.
View 5 Replies View RelatedI am looking to build a dedicated syslog-SNMP server with remote web interface and I would appreciate a discussion from our community on recommending the best solutions to deploy. I would like to be able to create an opensource architecture I could easily duplicate for multiple stand-alone customer environments.
View 1 Replies View RelatedI have an old tower that I've installed Ubuntu onto. It connects fine online with a mobile broadband stick. I also have an old wireless router knocking about, and I've been trying to network up my house wirelessly using the tower as a router, if that makes any sense. Long story short, this is my setup
Internet ==> Mobile Broadband ==> Tower ==> Wireless Router ==> Wireless Devices.
I know that it's complicated, but I'm sure that it can be done. I've tried playing around with bind9, and playing with dhcp and the like. I feel that I am close.... but no cigar. how to route all traffic from the router
All I want to do is fade some text in and out via the opacity attribute, and change the text when it hits zero. My script changes the text on time, but ignores the formatting effects. I'm not worried at this stage about the else statement in the startFadeEffect() function. I just want the fade effect to work here the way it should.
[Code]...
I'm new to send mail. I have a server with a public address and domain name. But I only want to implement a small sendmail network on our 20-user LAN. Can I turn my public server into a sendmail server? Are there any simple step-by-step instructions for this?
View 1 Replies View RelatedI have several PCs running w7 and linux. I have a netbook Samsung N150 which has a large HD (250G) and interested in running 24h homeserver mainly for media files. Netbook will be hooked up to LAN and will be streaming wirelessly (have fast connection) thru out the house. Which of the recent distro.
View 3 Replies View Related