Ubuntu Networking :: Can't Get Permissions In Samba Share?
Jun 6, 2010
When I create a new folder on my ubuntu machine and share it with my windows 7 machine using 'net usershare add <dir> <path>', I can't get write perms in Win 7. It keeps giving me a "You need permission to perform this action'. I've chmod the folder to 777 but still no luck.
The funny thing is, it was all working fine until I tried to add a new usershare yesterday (Can't think what I've changed). I use this sharing method to share all of my development /var/www/ folders so I can work on them from my win machine.
I have had a few problems with my samba smb.conf, and it nuked and rebuilt yesterday. I'm fairly new to the Linux game, and this permissions problem has me baffled.
View 1 Replies
ADVERTISEMENT
Sep 9, 2010
what I am trying achieve is read/write access for my MS domain account and read-only access for everyone else. In smb.conf I have this:
Code:
map to guest = bad user
usershare allow guests = yes
username map = /etc/samba/smbusers
[code].....
I can access this fine with my MS domain account, what I can't work out is how to give others read-only access to the same share. I guess I could create a second share for the same folder with a different name and permissions, but that seems a bit clunky and I'd have to remember to pass on a different name to the one I am using. I also tried using the Nautilus right-click "Sharing options" and then setting the folder permissions. This works fine for giving others read-only access, but loses capitalisation of the share name and doesn't seem to recognise my MS domain account as being valid.
View 1 Replies
View Related
Apr 30, 2009
I have set up a Samba share via my CentOS 5 server (the samba share is actually a mounted filesystem, not local machine space). I have been successful in adding permissions for my windows users within the smb.conf, but have an additional need that I cannot figure out. I would like for my Windows administrators to be able to create folders and assign permissions from their machines (and their Windows GUI). Ultimately I need the folders on the Samba share to behave correctly when Windows group permissions are applied by these administrators.
When the folders are created, the "Everyone" identity cannot be deleted and sometimes "Creator Owner" or "Creater Group" show up. I have seen several threads start down this path, but haven't seen a definite answer (I may have just missed it!).
View 1 Replies
View Related
Mar 22, 2010
i have an old desktop that i have decided to use as a central point for localhost/website files. I have 2 laptops, a ubuntu and vista, and i want them both to be able to see the public_html folder on my desktop, and be able to create/update folders and files.
I have set up the samba sharing and that's working fine, but when i create folders using my laptop, they are not writeable to the desktop or other laptop because my laptop is the creator. Is there a way that I can set it so that whenever folders/files are created from either laptop, they have full permissions?
View 2 Replies
View Related
Nov 18, 2010
I am trying to set up a Samba share on one of my machines where I am the owner and a special group manages permissions for read-only access ( me:specialgroup ). If I log into the share as me, there is no problem (I have read/write privs as per usual). However, I am not able to log into the share using any of the group members (there is only one currently). That user is not able to access the share (failed to mount).
The folder (which is the share) is owned by me:specialgroup and the permissions have been forced down the folder. Samba is set to Share this folder with no guest or others write access.
View 9 Replies
View Related
Oct 13, 2010
I'm trying to set up my samba server so that all the shares are visible to everybody but that some shares can only be accessed by certain users. I have a folder Video that everybody can access without a username or password. I now want to create a share that only I can access called webserver.
This is my samba.conf
Code:
[global]
dns proxy = No
netbios name = DATABOX
guest account = nobody
restrict anonymous = no
browseable = yes
server string = server
workgroup = WORKGROUP
public = yes
security = share
[Video]
Writeable = yes
Path = /media/data/Video
Public = yes
[webserver]
Writeable = yes
Public = no
User = malteser
Path = /media/data/Webserver
Windows does not let me enter a username or password. I'm pretty sure this used to work.
View 1 Replies
View Related
Mar 19, 2011
I have set up a computer to use as a file server using Samba. I attached a 1TB hard disk to it and had the system to mount it automatically. I have 4 user accounts which will be able to access this network share. An administrator account is called "server". I'll call them user1, user2 user4. This is the folder structure:
+-/mnt/FILES
+-BACKUP
backup files (accessible only to "server" user)
+-MUSIC
music1.mp3 (read only files for all users)
music2.mp3
[Code]...
I don't know which groups I should create. I'm having a hard time setting file/folder permissions. And I wanted to know how to set Samba so that it won't ask for a password when accessing public/group files, but asks for it when accessing private user files.
View 1 Replies
View Related
Mar 23, 2010
i have setup a samba server and created samba shares on it, i have configured the samba server to authenticates users from a windows server 2003 DC,
i have 2 shares call IT and MYSHARE, I want to give read and write permissions to sevaral users to those two shares and read only permisson to all the other users.
i tried editing the smb.conf file with the following settings , but no one can write or modify the files in the shares including the users specified in the
write list = cweerasinghe,njayarathna.
[IT]
writeable = Yes
browseable = yes
public = no
comment = IT share
[Code]....
how can i give access to the write list = cweerasinghe,njayarathna users to
read, write and modify the files in the shares ??
View 4 Replies
View Related
Feb 15, 2011
I have a couple of user accounts where each member belongs to a group i have created: Each user access the share using their own user account credentials.
How can I configure Samba in a way so that each modification done on the share gets the owner of the user and my group instead of the user and the users own group? I would also like the access rights to be 770 to each modification.
In other words, today each modification by "userA" get the owner "userA.userA" and I would like it to be "userA.MyGroup" with "rwxrwx---" permissions.
View 3 Replies
View Related
Sep 3, 2010
How can I set permissions for users within the share?
Example: I have a share called Programming and some user can create folders within it most others can not, can read the documents.
How do I set permissions?
View 2 Replies
View Related
Jun 12, 2011
I have a samba shared folder in my flash disk. Yesterday I installed ubuntu 11.04 and now sharing is not working any more. I do the usual procedure (that worked so far), I right click my folder > sharing options and tick "share this folder" as well as "Allow others to create and delete files in this folder" but I dont get the usual messages asking to add permissions automatically.When I try to mount my folder in another pc with linux, I get permission denied and that the folder is only readable and in another, windows cannot find the network path to my folder.My folder has about 10.000 files. asking to add permissions automaticallyI created another folder on the same flash and when I create share I get the message asking to add permissions automatically but it is not visible either. I even cant see my folder in "my places" > network, so it is not a matter of the mounting command
View 1 Replies
View Related
Jan 12, 2011
In my work I want to build up a Linux based network, where windows and linux clients are going to share a Thecus network drive.Each client will have specific permissions for accessing the samba shares. I have installed Ubuntu SRV 10.4 with gui and webmin.
View 1 Replies
View Related
Jan 20, 2011
Certain files are being created with ACL permissions attached. I am not sure why. Is there a smb.conf option that will stop this from happening?
View 2 Replies
View Related
May 5, 2010
My samba-shares are mounted in fstab. Everything works fine except for one small issue: when copying files from the local PC to the share the files are copied but the timestamps and permissions of the files are not. Instead a message "operation not permitted" appears. 'root' on the client can copy files WITH timestamp etc, a normal user cannot.
Below the line in fstab on the client and smb.conf on the server.
View 3 Replies
View Related
Feb 24, 2009
I've got my Samba shares up and running. I can stream files from the server, I can create files on the server, and I can copy files from the server.
Running a Windows program (from a Windows box) directly from the Samba server, however, is turning into a nightmare. I'm getting Access is Denied errors from the Windows box, yet I can copy/create/etc from the entire directory with no problems.
Are there any special permissions I need to run EXE files from a Windows box, located on a Samba share? I've already chmod'd everything to 777, and I show full access when ls -Z is used.
View 2 Replies
View Related
Apr 26, 2011
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....
View 6 Replies
View Related
Jan 22, 2011
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
View 4 Replies
View Related
Nov 16, 2010
First let me say that Lubuntu is a lightweight version of Ubuntu, so there is not much point in loading it up with unnecessary packages. If you just want to share printers on a Linux network, you don't need Samba. And if you just want a way that users can "push" files to others on a network, use Giver (+ Avahi) as this is a better option. Especially as it sorts out file permissions for you.
To enable file sharing on a Lubuntu 10.10 machine, go to Preferences > Synaptic Package Manager and add the following:-
* samba
* system-config-samba
* gvfs-bin
* gvfs-backends
...accepting any dependancies, 11 packages in total.
I suggest you re-boot now. As an initial test, go to file manager (pcmanfm) and enter:-
smb://localhost
You should see the local print$ folder listed.
To access folder shares remotely
* open file manager (pcmanfm)
* enter the IP address or computer name of the machine you wish to access
e.g. smb://192.168.0.99 or smb://print-server
To share a folder:-
Go to: Preferences > Samba (enter password when requested)
In the Samba Configuration screen:-
* File > Add Share
* use Browse... to select folder to be shared
* Tick "Visible" and (if required} "Writable"
* In the "Access" select "Allow access to everyone"
Set the Linux permissions:-
* locate the folder to share in file manager
* right click on the folder and select Properties > Permissions
* set the required permissions, e.g. Other: Read & Write (to allow anyone full access)
View 7 Replies
View Related
Dec 30, 2010
I have a Samba server running on a box where I login to admin as user:
FRED
The Samba users are
SUE
JOE - Read only for specified paths (media playback access only user)
SUE can read/write to any directory under the share: Media
So all that is working fine. As long as I do file operations remotely as SUE everything works remotely. How can I make it to where everything SUE does over Samba FRED automatically has permissions to edit when logged in locally (or SSH)? Also, remember, Joe needs to be able to read where specified.
View 3 Replies
View Related
Jun 28, 2011
I am experiencing strange difficulties with Samba. The permissions aren't set correctly, when creating a file or a folder on the mounted samba share.
My smb.conf looks as follows:
Code:
[shareOffice]
path = /home/shareOffice
writable = yes
browseable = yes
create mode = 0777
directory mask = 0777
force create mode = 0777
force directory mode = 0777
Now if I create a regular file on the folder:
Code:
touch testFile; ls -l
The permissions turn out to be:
Code:
-rwxr-xrwx 1 simon share 0 2011-06-28 21:42 testFile
Why the w bit on the group is missing? If I play around with the create mode / force create mode, I get every other possible permission output --- except the write access for group members.
View 3 Replies
View Related
Feb 15, 2010
I have karmic on my laptop, and I can't access my windows network. I have had previous versions of ubuntu and managed to configure samba. However, since my last reinstall, I can't get it to work.
View 7 Replies
View Related
Jul 8, 2011
I have an Ubuntu 11.04 laptop that I use to connect to a Windows 7 server. Everything was working fine until the hard drive on the server crashed and it was replaced with a backup. Now I intermittently lose access to the shares with Nautilus giving me the following message:
"The folder contents could not be displayed.You do not have the permissions necessary to view the contents of Folder"
When I look at the mount points in terminal I see the following:
drwxr-xr-x 5 root root 4096 2011-07-08 13:12 .
drwxr-xr-x 23 root root 4096 2011-05-03 11:17 ..
d????????? ? ? ? ? ? Folder
Where Folder is the mount point.My fstab looks like this, although I must point out that I have tried virtually every possible permutation with no change.
//10.35.1.110/Share /media/Folder cifs rw,_netdev,iocharset=utf8,credentials=/root/smb/credentials,uid=1000,gid=1000,noperm,file_mode=077 7,dir_mode=0777,sign 0 0
Sometimes the permissions will revert back by themselves, sometimes I need to umount and mount to get back in.I have tried deleting and recreating the mount points. No change.It is driving me up the wall, I have tried everything I can think of, installing/uninstalling winbind, the fuse modules etc etc. I use this machine as a production machine in a heterogeneous environment and everything works awesomely except for this. I love Ubuntu, I can't even think of booting Windoze these days but not being able to access the network shares is a right show-stopper for me.
View 9 Replies
View Related
Aug 27, 2011
I have a Natty headless server that I would like to set up shared directories and grant specific users write permissions. I use a Windows 2008 R2 machine with Active Directory for authentication and have created a group GroupWithWriteAccess which I want to have write access to the shared directory. I want all other users to have read only access. I have edited my smb.conf file with the following
Code:
[TV]
path = /media/share/Media/TV
writeable = yes
write list = primaryuser @GroupWithWriteAccess
create mode = 0660
directory mode = 0770
The machine is fully setup to work with Windows authentication and I can access shares from the ubuntu machine, it's just sharing local directories with the correct permissions that I can't work out. So far I can access the files from my other machine, but I do not have write access even though I am logged on as a user who is a member of GroupWithWriteAccess.
View 1 Replies
View Related
Mar 4, 2010
I am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
View 8 Replies
View Related
Jul 26, 2010
I have mounted a samba share on my desktop from a remote server (with smb4k). There I created a symlink to "/". When I open the symlink with konqueror it opens the right one (the root directory of the server), but when i open this link with the shell (cd rootfs/), then it opens my local root directory (of my host)... Is it possible to open the right link with the shell?
View 1 Replies
View Related
Sep 15, 2010
Ubuntu 10.04 with Windows OS as Virtualbox, using Samba I connected to another computer which shows up mounted as:
Code:
smb://scott/premier9/
Now in Virtualbox Shared folders it doesn't show up so I can't share it?
Screen shots below...
How can I See it in Virtualbox?
View 1 Replies
View Related
Nov 16, 2010
My desktop is now dual boot, Xubuntu 10.10 has been added to WinXP. The attached parallel printer works fine with either OS. When running XP I can share the printer with my two XP laptops without problem. I cannot share it when the desktop is running Xubuntu. Neither laptop can see the printer. However, if I open the desktop Samba config application, change any parameter, retype in the original parameter, both laptops can see and connect to the shared printer - until I reboot the desktop
View 9 Replies
View Related
Jan 7, 2011
I've installed ubuntu 10.10 and shared with samba a folder of the disk with no problem I tryed to share 2 different usb disk and I got problems!
With windows I can see the shares, but not browse and all the setting in smb.conf are the same for the folder in the hard drive and the USB disk
View 3 Replies
View Related
May 3, 2011
I have a samba-share that mounts on my desktop. But how do I find it from applications?
When I browse from application is not visible in the desktop folder.
PS. I find it with smb://pathway, but I don't know how I can do it from some gui-applications.
View 1 Replies
View Related
May 8, 2011
I have two Ubuntu 10.10 computers and two Windows XP computers connected to my network. I cannot share files between the Ubuntu computers using samba. I keep getting the "Unable to Mount Location Failed to mount Windows share" error. I've tried the solutions posted by dmizer here and nothing works.Random true facts:I can successfully connect to folders shared on my Windows XP computers from either windows computer.I can successfully connect to folders shared on my Windows XP computers from either ubuntu computers.Neither of my windows computers cannot connect to folders shared on either ubuntu computer.Neither ubuntu computer can connect to folders shared by the other ubuntu computer.I REALLY need to get samba to work since I have other Windows computers on my network.
View 8 Replies
View Related
