Fedora Security :: Invalid XINETD_CONF_PATH Configuration Option - Non-existent Pathname
Mar 10, 2010i install from
yum install rkhunter
rkhunter 1.3.6-4.fc12
Invalid XINETD_CONF_PATH configuration option - non-existent pathname
ADVERTISEMENT
Fedora Security :: Invalid XINETD_CONF_PATH Configuration Option - Non-existent Pathname Specified: /etc/xinetd.conf?
Mar 24, 2010I'm just trying to figure out what is going on with FC12
Here is the error:
[root@localhost bigmac]# rkhunter --check
Invalid XINETD_CONF_PATH configuration option - non-existent pathname specified: /etc/xinetd.conf
Red Hat / Fedora :: Compilation Error In Module With ARM9 For IO - Invalid Option `64'
Dec 13, 2010We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
#make -C /lib/modules/`uname -r`/build M=`pwd` modules
make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd` modules
make[1]: Entering directory
`/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
CC [M] /home/shekhar/samsung_lcd/gpio/char.o
cc1: error: invalid option `64'
[code]....
Debian Configuration :: Lsblk Shows Non-existent Md Partitions After Reboot
Jan 14, 2016I'm getting weird behaviour while setting up an mdadm RAID1 array on debian 8.2.
After I set-up the array, lsblk shows:
Code: Select allsimon@debian-server:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
`-sda1 8:1 0 931.5G 0 part
`-md0 9:0 0 931.4G 0 raid1
sdb 8:16 0 931.5G 0 disk
[Code] ....
After a reboot, lsblk shows:
Code: Select allsimon@debian-server:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
`-sda1 8:1 0 931.5G 0 part
`-md0 9:0 0 931.4G 0 raid1
|-md0p1 259:0 0 811.6G 0 md
[Code] ...
I don't know where the md0p1 and md0p2 partitions are coming from. My /etc/fstab and /etc/mdadm/mdadm.conf both have nothing about this in them.
parted shows one partition on md0:
Code: Select allsimon@debian-server:~$ sudo parted /dev/md0 print
Model: Linux Software RAID Array (md)
Disk /dev/md0: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 1000GB 1000GB ntfs
Where the md0p1 and md0p2 partitions are coming from?
I'm setting up the array by doing as follows:
Delete existing device (I've done this a few times):
Code: Select allsudo mdadm --stop /dev/md0
sudo mdadm --remove /dev/md0
Zero drives:
Code: Select allsudo dd if=/dev/zero of=/dev/sda bs=1M count=1024
sudo dd if=/dev/zero of=/dev/sdb bs=1M count=1024
Create partition tables:
Code: Select allsudo parted /dev/sda mklabel gpt
sudo parted /dev/sdb mklabel gpt
Create full-disk partitions:
Code: Select allsudo parted -a optimal /dev/sda mkpart primary '0%' '100%'
sudo parted -a optimal /dev/sdb mkpart primary '0%' '100%'
Set raid flag on partitions:
Code: Select allsudo parted /dev/sda set 1 raid on
sudo parted /dev/sdb set 1 raid on
Create RAID array:
Code: Select allsudo mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sd[ab]1
Add filesystem (I'm using NTFS, but the problem also happens with ext4)
Code: Select allsudo mkfs.ntfs -f /dev/md0
Fedora :: Invalid Security Certificate?
Jun 15, 2010Got F13 installed yesterday, this afternoon I suddenly started getting Secure Connection Failed warnings. I'm not sure whose problem it is because it mentions uses an invalid security certificate.This certificate is only valid for *.opendns.com(Error Code: ssl_error_bad_cert_domain)It continues to say that someone could be impersonating the actual server. I am still receiving mail through google and my google calendars seem to be working. I do use OpenDNS for my DNS instead of my ISPs (Comcast which would very often slow down) and obviously I use IMAP mail with google on Thunderbird. So is it google, or OpenDNS, or Thunderbird that has a problem. Firefox does not seem to have a problem
View 2 Replies View RelatedFedora :: Error 1: Filename Must Be Either An Absolute Pathname Or Blocklist
Jul 26, 2009I get the following error when I try to boot vista thru grub. This is what I did, Got a new Hard drive installed it. Configured the bios to look at the new hard drive first. after installing vista on the new hard drive I switched the boot order and added the lines for vista(last 3 lines) in /boot/grub/grub.conf. I get the following the following error.I have to change the bios everytime i have to boot vista.
error 1: Filename must be either an absolute pathname or blocklist
#boot=/dev/sda
default=0
timeout=15
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.29.6-213.fc11.x86_64)
[Code]...
Fedora :: Logged In As Root - What Is The Home Directory Pathname
Aug 23, 2010Im logged in as root in Fedora, What is the home directory pathname?
View 2 Replies View RelatedFedora Security :: Suddenly Root Password Invalid For Su Command?
Apr 9, 2011I have recently installed Fedora 14 on a new computer we presented as a gift to my sister-in-law. She is new to Linux. Although I've used Fedora since Core 1, I'm no expert on security issues, and this baffles me. She's doesn't know how to change the root password, so why doesn't it work any more? She discovered the problem when attempting a yum update from a terminal.(1) How could the root password have gotten changed? How likely is it that someone got onto her system through ssh, made a lucky guess on her root password, and then changed it? Are there robots that do this?
(2) The firewall is enabled. I have it set up as follows: (a) under "Trusted Services," only ssh is checked (I need to be able to get in remotely this way); (b) under "Trusted Interfaces," I have eth0 checked (I need to be able to use VNConto her desktop).Question: Are these settings giving ample protection? What settings would be recommended to protect her system while at the same time allowing me to access it through ssh and VNC?
Debian :: Mount Option Is Invalid
Jul 11, 2010i just installed Debian 5.0.5 ! and i used guided partition (option one) while installing BUT immediately i cannot access my Windows drives C & D. if i click it , it says "Invalid mount option when attempting to mount the volume C " how to fix it?
View 9 Replies View RelatedServer :: Option -m: Invalid Argument Near Character 14
Nov 26, 2010Option -m: Invalid argument near character 14
View 1 Replies View RelatedFedora Installation :: No Option For Static Ip Configuration During 10?
Apr 22, 2009there is no option that static ip cannot be configured during fedora 10 installation. I may be wrong, as i am now to fedora.
View 7 Replies View RelatedDebian :: Invalid Option When Attempting To Mount Volume
Feb 19, 2016i can not enter to my partition when i try that thing , i got this message:
1- Invalid mount option when attempting to mount the volume.
2 - You are not privileged to mount this volume.
first message it is about entering (( Windows OS partition )) (( NTFS ))
second message it is about entering other partiton with (( FAT32 ))
General :: Vgdisplay -v -D Results In Invalid Option -D In Rhel 5.5 - Tikanga
Jul 15, 2010Any idea when the -D option was withdrawn ? I could not find much information on this . Also, what exactly is the difference between vgdisplay -v -D and just vgdisplay -v .
View 6 Replies View RelatedOpenSUSE Network :: Invalid Command Line Option: Console Is Not Supported (1001) (403)?
Apr 7, 2010I'm using linux suse 9.3. Recently i try to run execution files but it shows an error try running with the option "-console" or "-silent" When I tried with the -console option, I got the error - The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
[Code]...
Fedora :: Make Mkdir Silently Overwrite Any Existent Directory?
Feb 19, 2010I am working on a bash script which among its operations creates directories using the mkdir command. However, when the directory already exists mkdir mentions that in the command line output.
Is there any way I can make mkdir silently overwrite any existent directory? (no messages in the output). For the same price, could it be done with other commands such as cp or mv?
Fedora Networking :: Wireless Connection With WMP600N Very Slow Or Non-existent
May 15, 2010I have installed Fedora 12 OS which is using kernel 2.6.32.11-99.fc12.x86_64. I am using a Linksys WMP600N Wireless-N PCI Adapter with Dual Band card which has a Ralink chipset. I have installed the latest rt2860 driver which uses the 2.6.32.11-99.fc12.x86_64 kernel. If there is any other pieces of information that is need I can provide it.
Problem: I can use either the Ethernet connection which is built into my ABIT mother board or my PCI wireless card. My Ethernet connection works perfectly however; my wireless card comes up attaches to my wireless router; that's it. There is a strong signal, the WPA2 security password works correctly. I am able to ping my loop-back address and my DHCP IP address for my wireless card but I can not ping the router or anything outside of my box.
If I let the ping program run for a while and allow it to try to ping the router, after a period of time ~5minutes or so I will get several hits and then stop. The firewall does not change from my Ethernet connection to my wireless connection. The Wireless connection is a trusted interface in my firewall specifications. Questions/Thoughts:
Can I use the same OS provided routing table for my Ethernet connection for my wireless connection? Would the OS know which port to use by switching to a wireless connection (after reboot)? Do I need to somehow switch or bridge the port? Is the wpa_supplicant playing with my connection and opening it up and then shutting it down? Below are some netstat data: routing, interface table, statistics, and dmesg on the kernel driver rt2860.
[Code]....
Ubuntu Security :: Selecting The 'Available To All Users' Option In Network Mgr Mess With Security?
Oct 15, 2010To avoid having to input a password for the keyring each time I connect to the net via wireless, I enabled the 'Available to all users' option in Network Manager. Now, my question is this. Are the 'users' it refers to just those created on this machine? Would a drive-by be able to use my network without entering the password?
View 3 Replies View RelatedUbuntu Installation :: Lost Windows 7 Boot Option In Grub - Error 12: Invalid Device Request
Jan 12, 2011I had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.
root@support-Latitude-E6400:/home/support# fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.
title=Windows 7
rootnoverify (hd0,6)
makeactive
chainloader +1
When i try to boot from windows 7, i get the following error. Error 12: invalid device request. How can i get my laptop to boot from windows again?
Security :: Removing Setuid Option For Security?
Nov 18, 2010According to Security standards given in[URL]Quote:Unless otherwise approved the following setuid root binaries are the only ones allowed on production servers:
* /bin/su
* /usr/bin/sudo
* /usr/bin/passwd
[code]....
Debian Configuration :: Invalid User Using SSH
Nov 26, 2015I just installed Debian Jessie (3.16.0-4-amd64) on a desktop box I intend to use as a server in our home office. During installation I included the web server and SSH server options. I have a user account, 'mitchell' set up in addition to root. Everything is working great except that I am unable to log in via SSH from other machines, such as a Windows desktop also on the office LAN (using PuTTY). From the PuTTY terminal it looks like the user name is accepted because the password is requested, but after entering the password it says "Access denied".
Back on the Debian box in I see:
Code: Select allNov 26 14:12:02 DebianDevP6TSE sshd[2278]: Invalid user mitchell from 192.168.1.96
Nov 26 14:12:02 DebianDevP6TSE sshd[2278]: input_userauth_request: invalid user mitchell [preauth]
Nov 26 14:12:07 DebianDevP6TSE sshd[2278]: pam_unix(sshd:auth): check pass; user unknown
Nov 26 14:12:07 DebianDevP6TSE sshd[2278]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=rmbiserv.attlocal.net
Nov 26 14:12:10 DebianDevP6TSE sshd[2278]: Failed password for invalid user mitchell from 192.168.1.96 port 60010 ssh2
So I am guessing I need to set up either the SSHD server, or maybe something in PAM, to authorized users for SSH access?
As a note, "mitchell" is the user name I use to log on to Debian, and I am entering the same user name and password when trying to log in via SSH.
If I try to log in via SSH as "root" I get the following in the log:
Code: Select allNov 26 14:17:01 DebianDevP6TSE CRON[2329]: pam_unix(cron:session): session opened for user root by (uid=0)
Nov 26 14:17:02 DebianDevP6TSE CRON[2329]: pam_unix(cron:session): session closed for user root
Nov 26 14:29:59 DebianDevP6TSE sshd[2383]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=rmbiserv.attlocal.net user=root
Nov 26 14:30:01 DebianDevP6TSE sshd[2383]: Failed password for root from 192.168.1.96 port 60132 ssh2
General :: Get The Pathname Of The File And Its Links?
Dec 21, 2010i have to write a shell script that takes name of the file as command line argument and the script should use path envt variable to look for the specified file and specify where are the different instance of the filename specified exist
firstly enter the filename echo "enter the filename" read filename by using ls command we can get to know how many links are there for that file but i don't know how to get the pathname of the file and its links after knowing the pathnames of the file i can set the path variable using export command can any one tell me how to get the pathname of the file i entered as a command line argument
General :: Invalid Mount Option When Attempting To Mount The Volume
Jun 30, 2010I have two internal hard drives.I just installed Debian Lenny in the smaller 80GB. But when I try to access the other hard drive it shows:
"Invalid mount option when attempting to mount the volume"
info:
-The 80GB is on dual boot with Windows 7 and Debian Lenny.
-The 500GB secondary hard drive is NTFS filesystem.
Programming :: Socket Option "IPV6_ROUTER_ALERT" Is Invalid / Why Is So?
Jan 15, 2010I want router catch the ip packet which mark router alert label, change it and send to the next hop. Not just forward it immediately.
So I set IP_ROUTER_ALERT and IPV6_ROUTER_ALERT option for ipv4 and ipv6 socket. IP_ROUTER_ALERT was just fine and I can do what I expect. However when I set on IPV6_ROUTER_ALERT, it tells me "Protocol not available" (errno = 92). And This option can be found in "$Kernel/net/ipv6/ipv6_sockglue.c"
Debian Configuration :: Invalid Character In Revision ?
Sep 10, 2010When i upgrade my packages with aptitude in testing, I am starting to get this error.
Also I get this from cron now and then.
Security :: Invalid (Untrusted) Certificate - TWC Webmail
Oct 7, 2010At the login webpage of <[URL]>, the Time Warner Cable (TWC) Webmail site, I am immediately confronted with a warning that the Security Certificate is invalid & that the site is untrusted. This occurs with Firefox, Seamonkey, & Konqueror. This does not occur on Microsoft or Apple systems; I have checked other colleagues machines. I have manually overridden the warning & everything functions fine. I have contacted TWC & am awaiting their tests. But, I would like some independent corroboration from other users in the Linux community. Could some of you perform the test yourself on this URL? An error will be readily apparent.
View 14 Replies View RelatedSecurity :: Logging DROPPED And INVALID Packets
Oct 18, 2010I am trying to figure out what command to use to show the number of DROPPED and INVALID packets that the firewall is handling.I'm going to put these commands into a log analyzer script which will run every 15 minutes with cron. The firewall is running and operating the way I want it to. I'm running CentOS 5.4.
View 2 Replies View RelatedFedora Security :: Free Radius Configuration + F10?
Jun 10, 2009i installed freeradius 2.1.3 on fedora 10 and want to use it with ieee802.1x using peap.when i run command to start radius service in debug mode the following output come
[root@Fedora ~]# radiusd -X FreeRADIUS Version 2.1.3, for host i386-redhat-linux-gnu, built on Dec 8 2008 at 15:31:31 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
[Code]...
Debian Configuration :: Raspbian On Raspberry Pi Always Get A Invalid IP Address
Jan 7, 2016I got the Raspberry pi 2 Model B. I flashed my sdcard with raspberian Jessie kernel 4.1 (latest).Also tried wheezy and NOOBS, same behavior.With a ethernet cable (known working), I tried connecting my Pi to my home router, and I got a invalid ip address 169.254.xxx.xxx, and therefore no linkup. I got the same results by connecting my Pi directly to my modem (wired).
I know that /etc/dhcpd.conf is the new /etc/network/interfaces for network configurations.So I tried the debug option, and I noticed that the router doesn't seems to response to the DISCOVER command from the Pi (dhcp v4 protocol).Here's a dump of by /var/log/syslog | grep dhcp
Code: Select allDec 28 12:00:02 raspberrypi systemd[1]: Starting dhcpcd on all interfaces...
Dec 28 12:00:02 raspberrypi dhcpcd[349]: version 6.7.1 starting
Dec 28 12:00:02 raspberrypi dhcpcd[349]: udev: starting
Dec 28 12:00:02 raspberrypi dhcpcd[349]: dev: loaded udev
Dec 28 12:00:02 raspberrypi dhcpcd[349]: eth0: disabling kernel IPv6 RA support
[code]...
ANd if i use raspbian flesh out of installation, I get this when i run
dhcpcd -k
dhcpcd eth0
eth0: probing for an IPv4ALL address
eth0: using IPv4ALL address 169.154.202.224
Seems like my home router TP-link (default setup) doesn't send a response to the dhcp request.
Debian Configuration :: ACPI Invalid PBLK Length [7]
Jun 23, 2010During boot (and in dmesg) I get the following message:
[6.782835] ACPI: Invalid PBLK length [7]
Also possibly related, whenever I close my laptop lid, kacpi_notify and kacpid eat up the cpu, and the screen doesn't actually blank.
Applications :: Samba Configuration - Invalid Credentials Error
Oct 26, 2010I just wanted to checkout samba. So, I installed on a CentOS 5.5 64bit server. The version I used is 3.5.6. I followed this guide. [URL]. LDAP is working good. When I use the following command: (net groupmap list) I am getting the error.
Code: [root@server1 samba]# net groupmap list
[2010/10/26 16:26:09.135901, 0] lib/smbldap.c:1151(smbldap_connect_system)
failed to bind to server ldap://127.0.0.1 / with dn="cn=root,dc=mtm,dc=testdomain,dc=com" Error: Invalid credentials
[2010/10/26 16:26:39.180063, 0] passdb/pdb_ldap.c:3448(ldapsam_setsamgrent)
ldapsam_setsamgrent: LDAP search failed: Time limit exceeded
[2010/10/26 16:26:39.180109, 0] passdb/pdb_ldap.c:3523(ldapsam_enum_group_mapping)
ldapsam_enum_group_mapping: Unable to open passdb I am sure that I have set the correct password in Code: smbpassword -w mypassword.
Also, I can login to the LDAP thourgh PHPLDAPAdmin with the same password and the bind cn.
Here is my smb.conf Code: # Global parameters
[global]
ldap ssl = off
nt acl support = yes
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 SO_KEEPALIVE
workgroup = TESTDOMAIN
netbios name = SERVER1
security = user
enable privileges = yes
#interfaces = 192.168.5.11
#username map = /etc/samba/smbusers
server string = Samba Server %v
#security = ads
encrypt passwords = Yes
#min passwd length = 3
#pam password change = no
#obey pam restrictions = No
# method 1:
#unix password sync = no
#ldap passwd sync = yes
# method 2:
unix password sync = yes
ldap passwd sync = no
passwd program = /usr/sbin/smbldap-passwd -u "%u"
passwd chat = "Changing *
New password*" %n
"*Retype new password*" %n
"
log level = 10
syslog = 0
log file = /var/log/samba/log.%U
max log size = 50
time server = Yes
#socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
mangling method = hash2
Dos charset = 850
Unix charset = ISO8859-1
logon script = logon.bat
logon drive = H:
logon home =
logon path =
domain logons = Yes
domain master = Yes
os level = 65
preferred master = Yes
wins support = yes
passdb backend = ldapsam:ldap://127.0.0.1/
ldap admin dn = cn=root,dc=mtm,dc=testdomain,dc=c om
#ldap admin dn = cn=samba,ou=DSA,dc=company,dc=c om
ldap suffix = dc=mtm,dc=testdomain,dc=c om
ldap group suffix = ou=Groups
ldap user suffix = ou=Users
ldap machine suffix = ou=Computers
#ldap idmap suffix = ou=Idmap
add user script = /usr/sbin/smbldap-useradd -m "%u"
#ldap delete dn = Yes
delete user script = /usr/sbin/smbldap-userdel "%u"
add machine script = /usr/sbin/smbldap-useradd -t 0 -w "%u"
add group script = /usr/sbin/smbldap-groupadd -p "%g"
delete group script = /usr/sbin/smbldap-groupdel "%g"
add user to group script = /usr/sbin/smbldap-groupmod -m "%u" "%g"
delete user from group script = /usr/sbin/smbldap-groupmod -x "%u" "%g"
set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u'
# printers configuration
#printer admin = @"Print Operators"
load printers = Yes
create mask = 0640
directory mask = 0750
#force create mode = 0640
#force directory mode = 0750
#nt acl support = No
printing = cups
printcap name = cups
deadtime = 10
guest account = nobody
map to guest = Bad User
dont descend = /proc,/dev,/etc,/lib,/lost+found,/initrd
show add printer wizard = yes
; to maintain capital letters in shortcuts in any of the profile folders:
preserve case = yes
short preserve case = yes
case sensitive = no
[netlogon]
path = /home/netlogon/
browseable = No
read only = yes
[profiles]
path = /home/profiles
read only = no
create mask = 0600
directory mask = 0700
browseable = No
guest ok = Yes
profile acls = yes
csc policy = disable
# next line is a great way to secure the profiles
#force user = %U
# next line allows administrator to access all profiles
#valid users = %U "Domain Admins"
[printers]
comment = Network Printers
#printer admin = @"Print Operators"
guest ok = yes
printable = yes
path = /home/spool/
browseable = No
read only = Yes
printable = Yes
print command = /usr/bin/lpr -P%p -r %s
lpq command = /usr/bin/lpq -P%p
lprm command = /usr/bin/lprm -P%p %j
# print command = /usr/bin/lpr -U%U@%M -P%p -r %s
# lpq command = /usr/bin/lpq -U%U@%M -P%p
# lprm command = /usr/bin/lprm -U%U@%M -P%p %j
# lppause command = /usr/sbin/lpc -U%U@%M hold %p %j
# lpresume command = /usr/sbin/lpc -U%U@%M release %p %j
# queuepause command = /usr/sbin/lpc -U%U@%M stop %p
# queueresume command = /usr/sbin/lpc -U%U@%M start %p
[print$]
path = /home/printers
guest ok = No
browseable = Yes
read only = Yes
valid users = @"Print Operators"
write list = @"Print Operators"
create mask = 0664
directory mask = 0775
[public]
path = /tmp
guest ok = yes
browseable = Yes
writable = yes