I have Centos 5.4 installed on my dedicated blade server.. (I thought I had some other OS - ignor SUSE 10.1 opps) I'm trying to install ImageMagick - I didn't find it on my server i did do what they said but not there..
1. I downloaded the file to the ROOT (i hope that the right Place)
2. cd ImageMagick-6.6.0-5
3. ./configure
4. This ERROR CAME BACK
[Code]....
I am trying to install Apache on my remote server. I've downloaded the latest Apache Http Server and when I configure it I get this error: configure error: No acceptable C compiler found in $PATH. So I download and extract the latest GCC Compiler and when I try to install that I get the same error:
configure error: No acceptable C compiler found in $PATH I am really stumped... Can anyone just offer ideas. My server is running CentOS 5.4 x64 and I'm remotely trying to download and install a running LAMP setup for Joomla. I'm using a shell to communicate with a cloud server type.
I am using Red Hat Enterprise 5 and have downloaded GCC 4.4.5 and trying to install or configuring the same, but getting some problem.
Code: # mkdir objdir
# cd objdir
# srcdir/configure Output of command
Code: checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
[Code]...
configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. this to install GCC package.
I'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.
The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the lm-sensors.org page (URL 2), but whenever I try to install anything (gcc, libtool,
libsysfs) it shows:
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in '/home/user/src/libtool-2.4':
configure: error: no acceptable C compiler found in $PATH
I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?
i'm a new on linux system and i have a problem with SUSE 9.1. I google for yast repositories to install "gcc" but i only see for release 10+. So i think 9.1 version it old version. The thing is that i can't upgrade the SO because it's a "sever" for some applications, and my problem is that i need to install Nagios, but when i type the ./configure command its says:
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
So I decided to install packages with yast, but i can't find any active repository. I very new on this, and i don't know if i'm doing right the things. Also i don't have too much practice on english.
This is the info of the SO
* uname -a:
Linux noc 2.6.5-7.111-default #1 Wed Oct 13 15:45:13 UTC 2004 i686 i686 i386 GNU/Linux
* cat /etc/SuSE-release
SuSE Linux 9.1 (i586)
VERSION = 9.1
Error: no acceptable C compiler found in $PATH.
I have an ubuntu 10.10
Install problem: no acceptable C++ compiler found in $PATH (Trying to install freeciv, game) ... checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking whether the C++ compiler works... no configure: error: in /home/peter/Download/freeciv-2.2.1': configure: error: no acceptable C++ compiler found in $PATH See `config.log' for more details. Other threads suggest install gcc which I thought I already did yet it didn't solve the problem!
View 9 Replies View RelatedI am running a server which is hosting a site where members can upload videoclips. I noticed that upon upload a thumbnail is not created for the videoclip. I found out that ffmpeg needed to be properly installed and in my case ffmpeg-php as the site runs on php. So far so good. I followed the instructions found somewhere to install ffmpeg-php but stall at the command: dot slash configure && make The error I get is:
checking for egrep... grep -E
checking for a sed that does not truncate output... slash slash bin slash sed
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
I presume it's because gcc is missing. how I can start tackling the problem and ultimately get gcc running so I can install the ffmpeg? I am really sorry I was hoping to elaborate a bit more but I get an error: You are only allowed to post URLs to other sites after you have made 15 posts or more. so I guess I need to wait and describe it differently.
I just installed RedHat and I need to install a compiler (among other things). When I go to 'configure' gcc I get:
configure: error: in `/Compiler':
configure: error: no acceptable C compiler found in $PATH
Why in the world would you require a compiler on the install of your compiler!? I may be dumb in many respects, and I'm sure that people will attest to that, but I'm not that dumb...How do I install gcc without a compiler? What, specifically, do I do with the configure script (or executable, I don't know what it is...)
While installing berkeley db on linux i m getting the following error:
"configure: error: no acceptable C compiler found in $PATH"
I m installing this for postfix.
I'm trying to configure Apache, however I have some problems..
linux-top:~/appli/httpd-2.2.14 # ./configure --prefix=/root/appli/
checking for chosen layout... Apache
checking for working mkdir -p... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
Configuring Apache Portable Runtime library ...
checking for APR... reconfig
configuring package in srclib/apr now
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
Configuring APR library
Platform: i686-pc-linux-gnu
checking for working mkdir -p... yes
APR Version: 1.3.9
checking for chosen layout... apr
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/root/appli/httpd-2.2.14/srclib/apr':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
configure failed for srclib/apr
no acceptable c-compilier found when installing vlc offline. mozzilla can't connect to internet but I can ping my server
View 3 Replies View RelatedI have had problems trying to use ./configure when compiling fvwm95. I get a error that says this
Code:
checking for cc... no
configure: error: no acceptable cc found in $PATH
for some reason I don't know how to install *.tar.gz files, I ommitted some of my files listed in the code after the ls command for simplicity
[Code]....
I have been trying to install MPICH2 on a server node for a cluster I am building running RedHat 5.5, and when running the "configure" shell file, it gives me the error message: "configure:4533: error: no acceptable C compiler found in $PATH." I tried to install the gcc c-compiler from the installation disk, but it had the dependency "libgomp.so.1()", which I cannot find on the disk nor on any web site. Where can I find this dependency or get a different c-compiler?
View 5 Replies View RelatedJust upgraded from UBUNTU to FEDORA 11. Installed most add on programs such as cacti & mysqld using YUM INSTALL. With help of 'scottro', I finally got cacti running, but still finding errors (most problems caused by different directory locations in this particular distro).
snmpwalk Binary Path
The path to your snmpwalk binary.
[ERROR: FILE NOT FOUND]
snmpget Binary Path
The path to your snmpget binary.
[ERROR: FILE NOT FOUND]
snmpbulkwalk Binary Path
The path to your snmpbulkwalk binary.
[ERROR: FILE NOT FOUND]
snmpgetnext Binary Path
The path to your snmpgetnext binary.
[ERROR: FILE NOT FOUND]
Does anyone know where are these directories located in Fedora (11)? Is there a way to find where a directory is located (normally i use 'whereis' )? No such problems when using UBUNTU...
I am trying to compile x264 but ./configure returns just Quote: No working C compiler found. Yes, I have installed build-essentials and yes, I have installed gcc Already tried update and upgrade... so I dont know whats wrong my c++ compiler works normally.
View 1 Replies View RelatedI have installed CentOS 5.5 and included the java development package. When I typed java -version, I got java 1.6.0. The problem is with the javac command, which is not found. I tried the following:
Didn't work!
I tried to install JRE to my remote Suse 11 SP1 linux.After i finished with files i typed like
export PATH=<my jre path>
now i have no bash commands - typing ls causes
-bash: ls: command not found
i think that i should re-export my PATH to the right value but i don't know what it should be. I tried differend values
/etc/profile
/usr/bin
i can download but i cant run anything because there is no ar file path for ark. please dont tell me to download something to get the ar file path because if i download it i can't open it
View 1 Replies View RelatedI'm setting up a RHEL 4 VM and have installed Oracle Java 1.6 from a bin file to /opt. I've added it into the PATH but when I try to run a installer that needs Java to run it says that it can't find a Java installation in my PATH but when I execute a which java I get the following:
Quote:
how to add a path to PATH variable permanently so that it remains persisent even after closing shell and rebooting the system when i added a path, to variable it remained there as long as i didn't closed the shell. but when i reopened it ,changed were undone.
View 2 Replies View RelatedI try to install some scientific software from source and get the following warning, when I run ./configure:
...
checking for javah in user's PATH... not found
checking for javah in known locations... not found
configure: WARNING: Invalid JNI include dir, exit!
[code]....
I just installed Netsurf, but I was confronted with "libnsbmp is not installed". So I installed libnsbmp.
The error "libnsgif is not installed" appeared when installing libnsbmp.
The error "libpng is not installed" appearded when installing libpnf.
...
I installed all that I was asked to install. However, when I was installing libcss, it said that "Package libparserutils was not found in the pkg-config search path. Perhaps you should add the directory containing 'libparserutils.pc' to the PKG_CONFIG_PATH environment variable". I have already installed libparsercutils but not in the /usr/lib dir.
What should I do to continue my installation? And anyone could tell me what are those lib stuff? I installed zlib with the apt-get install command.Can I get other lib stuff with the same command?
I logged into my Red Hat Enterprise Linux machine at work (use it for software development) and the primary GUI does not load. Instead, widgets appeared for xclock, xterm, and Firefox. In the terminal, I start typing in commands to try to figure out what's going on, but all commands are not found except pwd and echo. I 'echo $PATH' and that returns just an empty, blank line. 'echo $SHELL' lets me know I'm using cash.
The likely cause was my attempt to install Adobe Reader Firefox plugin yesterday. After it downloaded, I ran the binary but Firefox didn't seem to recognize that I had installed it, so I went into my .cshrc file and added the adobe folder to the path. That didn't seem to work, so I gave up, deleted the binary and the folder I installed to, and removed that directory from the path in the .cshrc file. This last thing (the export PATH line in that file) I'm certain is back exactly as it was before.
I have successfully added the /bin and /usr/bin back to the path from command line via
setenv PATH /usr/bin:/bin
but of course it doesn't stick after reboot nor does it magically load the primary GUI. I'd rather not go through the effort of creating a ticket for our company's Global Service Desk cuz there's no telling how long that could take to resolve. In the meantime, I can't do any programming.
I am using CentOS5.5 & everytime it is showing command not found. If I export the path as below it will be working fine until a reboot. Again same error i.e command not found if I open new terminal. Every time I am exporting as below:
#export PATH=/sbin/:$PATH
#export PATH=/usr/sbin/:$PATH
#export PATH=/usr/bin/:$PATH
#export PATH=/bin/:$PATH
How can I set these permanently as that the paths should automatically be exported for everyone user whenever the system boots. And command completion also should happen for eg. #fdi (press tab), then it should show available options such as fdisk, etc.
I am having problems with symbolic links and the $PATH variable.I have a directory:# /usr/rulerX/squarewhere /usr/rulerX/square is a symbolic link such that:
# ls -la
square --> square.hg.current
My path variable is set as:
[code]....
I just tried installing another version of libc6 (2.10.2-6) with kpackage. It didn't work so I had a broken package on my system. I then wanted to fix it with synaptic package manager which then told me in order to remove it, I had to pretty much uninstall all of linux. I then tried installing the older version of libc6 (the one I'm supposed to have: 2.7-18lenny2). That gave me the error code
dpkg -i '///home/sam/torrents/libc6_2.7-18lenny2_i386.deb' ;echo RESULT=$?
dpkg: `ldconfig' not found on PATH.
dpkg: 1 expected program(s) not found on PATH.
NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin.
RESULT=2
I already checked my path and it was: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin (I found it with echo $PATH)
I guess my path is okay so the problem is in ldconfig but how can I get ldconfig in the path and where could it be now?
I would like to know if there is a fairly easy "How To" for setting up my home network. I have 2 XP SP3 computers and 2 Linux with ver. 9.10. The XP boxes can see each other and share files and folders. I can see from an XP box one of the Ubuntu machines, but can't access any of the files or folders.
I get the following when I try: \Lstoragemusic is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.
I installed vbox and windowsXP as guest and fedora13 as host. As discussed in [URL] i have run: Quote: $ VBoxManage sharedfolder add "WinXP" -name "Downloads" -hostpath "/home/rudra/Downloads" --readonly but in guest, as i prompted Quote: net use x: \vboxsvrDownloads it gives error: Systemerror 53 has occured the network path was not found
View 6 Replies View Related