Fedora :: RAID Be Implemented On A Single Hard Disk?
Mar 25, 2010Can RAID be implemented on a single hard disk ? If yes, plz give a link for it.
View 2 Replies
ADVERTISEMENT
Hardware :: Fedora 11 RAID 1 - Disk Failure - Boot From The Single Working Disk?
Oct 16, 2009my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
Red Hat / Fedora :: Moving Install From Single Disk To RAID 1
Oct 27, 2009If you want a full run down as to WHY I want to do this, read here: webhostingtalk.com/showthread.php?t=899909Basically, my ISP could not get my server running stable on a simple raid 1 (or raid 5) so what it came down to was having them install my system on a single disk. I don't exactly like this, main reason being, if the system (or HDD) crashes, I'll end up with another several hours of down time..
View 1 Replies View RelatedUbuntu Installation :: Migrate Working Single Disk System To Existing RAID Array Using Disk UUIDs
Aug 1, 2010I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
Fedora Hardware :: RAID 0 With 4 Hard Disk - Adding New Partitions?
Jul 27, 2010We have a server with RAID 0 with 4 hard disks on it each 250 GB. Linux kernel must find one hard disk named: /dev/sda with 1TB capacity. right? And also we have 2 partitions on sda: sda1 and sda2. We want to add another partition but we don't have enough space.
Now the problem:
If we add another hard disk and run
Code:
fdisk -l
Will the /dev/sda space incremented automatically so we can add new partitions or we must do something?
Ubuntu :: Mdadm Raid 5 Single Disk Failure
Feb 2, 2010Recently, one the SMART utility said that one of the drives had failed and another drive was about to fail. I downed the box and hooked them up to my windows machine to run sea tools on them (They are all seagate drives). Sea Tools said that the drives were fine, while ubuntu said they were failing/dead. Yesterday I decided to try to fix one of the drives in the raid. I turned the server off, took the failed drive out, and restarted. Of course the raid didn't work because only 2 of the 3 drives were there, however it had been working w/ only 2 of the 3 drives for a couple months now (I'm a lazy college student). I turned it back off and back on with the drive there just to see if I could get the raid up again, but I havn't been able to get it to go. So far I've tried:
Code:
mdadm --assemble /dev/md0 /dev/sd[b,c,d]
mdadm: no recogniseable superblock on /dev/sdb
mdadm: /dev/sdb has no superblock - assembly aborted
[code]....
I'm looking for a way to trick the raid into working with just 2 drives until I can warranty the seagate and buy an external 1.5 TB drive to use as another backup. how to remove the bad drive from the array and replace it with a fresh drive, without data loss.
General :: Mount A Single RAID 1 Disk / Partition As Ext3?
Jul 7, 2011I need to copy data from a single HD, which used to be part of a Linux RAID 1. I've googled around, but can't find any clue how to mount partitions from this single HD.
Background: The HD comes from a linux based NAS box Synology DS207+. The NAS uses ext3 as filesystem. Both NAS disks are fine, but the other NAS hardware is dead and not worth repairing or replacing.
General :: Find Whether Raid Is Implemented Or Not?
Mar 9, 2010How to find whether raid is implemented or not ,without asking Linux Admin.
View 4 Replies View RelatedCentOS 5 Hardware :: Map Four Hard Disk As Single Volume?
Jul 1, 2010I need to install a voice recording application on a server.My problem is that I have four hard disks with 150 GB storage space each. So I have 150*4 = 600 GB Storage available as whole .I need all four hard drives (600 GB ) as single volume to store and retrieve recording .
View 1 Replies View RelatedUbuntu :: Get Hard Disk To Original State After Raid?
Feb 25, 2010i am currently trying to do software raid 1 on a running ubuntu 9.10 system with mdadm. I might have done something wrong and im trying to go back from the beginning. Does anyone know how to remove all the raid info from a harddisk and get it back to its original state.
View 2 Replies View RelatedUbuntu Installation :: Software RAID With Old And New Hard Disk?
Mar 24, 2010My system is installed on my main hd. Is possibile, if i buy a new hd, to setup a Software RAID, so with old and new hd without reinstall ubuntu?
View 2 Replies View RelatedUbuntu Installation :: Raid 0 - Two Hard Disk Array
Jul 8, 2010What is the best way to install Windows and Linux on two-hard-disk array? In fakeraid there are no problems in Win, but linux installation is almost impossible (i've tried unsuccessfully...). In software raid it would be impossible to share files between win and linux? And finally hardware raid is possible, but cheap controllers have low performance. Is there any other way (apart from spending a lot of $$ for adaptec controller) ?
View 1 Replies View RelatedUbuntu Installation :: 10.10 - Mirroring Hard Disk Using RAID
Jan 5, 2011I am using Ubuntu 10.10. I have a system set up with 1tb HD. I also have another 1tb HD which I'd like to use to mirror the other drive. So if the primary HD fails I can boot and operate from the mirrored drive. I've read that this is possible by using Raid. however I am confused if it is possible to set-up with a HD which is already set-up Ubuntu system. Also what what I can make out the mother board does not have a raid option.
View 2 Replies View RelatedSoftware :: Possible To Boot From Hard Disk Having RAID Partition?
Mar 28, 2010I wanted to implement raid5 such that one partition is from my laptop's hard disk and others from other hard disks. After making one partition a raid partition, I rebooted the system. The computer stopped mid-way during booting, and brought me to the shell. On typing fsck -p, it told me an unexpected error occured in the partition which I had made for raid. Is there some condition that we cannot boot from a disk containing one of the raid partitions ?
View 1 Replies View RelatedHardware :: Master Hard Disk Error After Installing Ubuntu 8.10 / Hard Disk Died
Apr 8, 2009after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedFedora :: Dual Boot Single Hard Drive Off USB
Oct 5, 2010I currently have Windows 7 installed on my laptop and I would like to dual boot w/ Fedora on the same hdd.I have two NTSF partitions, I shrunk my D drive 50GB for ext4 & swap.I've tried both liveusb-created & unetbootin to create a bootable USB to install Fedora.Anaconda starts up and I get through most of the install configuration, I set up GRUB & the partitions. Once I proceed to the next screen I get missing ISO image 9660 error My laptop doesn't have a DVD drive. It seems like a lot of people are getting this error, but I have found no concrete solution though.
How do I put the image on the drive? Windows can't read ext4 and I haven't been able to find a program that can.I have a USB to SATA adapter that I could hook up a DVD-ROM drive too, but I don't know if fedora will pick up on it.
Ubuntu Installation :: Copy Hard Disk Have 10.04 And Ext4 To 1000 Hard Disk?
Sep 23, 2010I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedHardware :: Adding Second Hard Disk With Windows To Boot With Grub On First Hard Disk
Jul 7, 2009I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedGeneral :: Changing GRUB From An External Hard Disk To The Internal Hard Disk?
May 14, 2010I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedHardware :: Check Hard Disk For Errors. Possible Hard Disk Failure?
Jun 21, 2011I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
General :: Use Hard Disk Image Like A Regular Hard Disk?
Apr 6, 2010If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
Red Hat / Fedora :: Configure A Set Of Hard Drives As A RAID Configuration?
Apr 21, 2010I am currently trying to configure a set of hard drives as a RAID configuration. My system is running with Red Hat Enterprise Linux Client release 5.1 as the base OS. I am booting from CD. I am trying to image a set of drives that have not been imaged before. When the GUI dialog window for disk setup is displayed, it shows a default disk layout including a LVM slice. In the disk layout is a /boot partition already. It is not what I would like so I edit it to be the size for my system and make it the primary partition. I also select it to be a software RAID. I then add three more partitions for my drive 'A' all of type software RAID and NOT primary partitions.
At this point my drives have the correct number of partitions except for showing the LVM slice. I select 'RAID' again, followed by selecting 'Clone a drive to create a RAID device ...' followed by 'OK'. I then get a dialog to select the source and target. i select my drive 'A' to be the source and 'B' to be the target followed by 'OK'. An error dialog is received stating that all the partitions are not of type software RAID. The disk partitions are all type software RAID except the extended LVM slice. I can not get past this point and I am following a procedure written some time ago by a person that is not available.
Red Hat / Fedora :: RAID And Disk Transfer For Copying Contents
May 5, 2011I had used DELL 1950 with 300 GB raid disk. Now, I purchased Dell 2950 with 450 GB (6 disk - 3 pairs of raid). I wanted to pull out old 300 GB from 1950 and put it in 2950 (temporarily) to copy all contents to the new system. How do I know which HDDs I need to pull out from 2950 so that I can replace them with 300 GB HDD to mount. I do not know how raid setup (I know unix alone - not raid commands). Is this possible? How to do it?
View 5 Replies View RelatedFedora Servers :: RAID 6-like Setup With Dissimilar Disk Sizes?
Jun 7, 2010I'm looking to set up a bit of a home server, and am wondering about storage. What I'd like is something like RAID 6, which has good redundancy built-in, but with this being a home server, I'd prefer to start a little smaller and leave room to build it up in future. I'd been looking at commercial products like the 'drobo', which seems fairly ideal, but I'd really like to see if I can do it myself. I understand that throwing the RAID into an LVM will allow for some expansion, but the last time I checked, most RAID setups called for the same sized disks, or at least limited the array by the size of the smallest disk present.
What I'd like is the ability to build a basic framework with a few cheap disks, and then as things start filling up, to be able to add larger ones (perhaps eventually pulling out smaller ones as though they'd failed and replacing them with big ones)
Fedora :: Keep Getting "A Hard Disk Is Failing" Warnings From The Disk Utility
Jun 8, 2011I am on F15 32-bit with GNOME 3. I keep getting "A Hard Disk Is Failing" warnings from the Disk Utility, very frequently. Is this a serious issue? Because I knew this to be a bug in Palimpsest DU back in F13/14. Also how can I disable any notifications from this application?
View 4 Replies View RelatedFedora Installation :: Install F13 On A Server That Has A 2-disk RAID Setup In The BIOS?
Jul 8, 2010I'm attempting to install F13 on a server that has a 2-disk RAID setup in the BIOS. When I get to the screen where I select what drive to install on, there are no drives listed. The hard drives were completely formatted before starting the 13 installation. Do I need to put something on them before Fedora will install?
View 3 Replies View RelatedUbuntu Servers :: HW RAID Disk Shows Up In Fstab But Not In /dev/disk/by-uuid?
Jun 28, 2010I have an SiI hardware SATA RAID card, with two 500GB disks in mirrored RAID configuration. When I first plugged them in and set it up, things seemed to work ok, but on boot the raid controller told me that the RAID needed rebuilding, and it would happen automatically after POST. So I didn't worry about it, and the drive mounted fine, and it's been that way for years. I just went in and manually on-line rebuilt the RAID in the controller's BIOS, and now when I boot into Ubuntu, both disks show up in fdisk, but neither show up in /dev/disk/by-uuid. Am I missing something?
View 9 Replies View RelatedHardware :: Why The OS Would Not Be Seeing The Raid As A Single Drive
Mar 4, 2010I have the H8dmu Supermicro mother board with the MCP55 RAID. CentOS 5 is detecting the four hard drives separately. The operating system resides on a hard drive not defined as a part of the RAID. The RAID was setup as striped.The sata_nv driver is loaded.why the OS would not be seeing the raid as a single drive?
View 2 Replies View RelatedGeneral :: Mount From The Old Hard Disk To The New Hard Disk
Jun 30, 2010mount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedFedora Installation :: Using The F10 Live CD To Setup Software RAID 1 Between 1 Hard Drives For Redundancy & Fstab
Apr 15, 2009I have been battering with FC10 and software RAID for a while now, and hopefully I will have a full working system soon. Basically, I tried using the F10 live CD to setup Software RAID 1 between 1 hard drives for redundancy (I know its not hardware raid but budget is tight) with the following table;
[Code]....
I set these up by using the RAID button on the partition section of the install except swap, which I set-up using the New partition button, created 1 swap partition on each hard drive that didn't take part in RAID. Almost every time I tried to do this install, it halted due to an error with one of the raid partitions and exited the installer. I actually managed it once, in about...ooo 10-15 times of trying but I broke it. After getting very frustrated I decided to build it using just 3 partitions
[Code]....
I left the rest un-touched. This worked fine after completing the install and setting up grub, reboot in to the install. I then installed gparted and cut the drive up further to finish my table on both hard drives. I then used mdadm --create...etc to create my RAID partitions. So I now have
[Code]....
