I'm trying to set up the Remote Desktop and am not getting anywhere. No matter what I do it seems that I'm only able to set it up to be viewable locally, over the local intranet. Do I need to open specific ports on a router? If so, what ports? Is there anything else I need to configure?
View 2 RepliesSetting up desktop (9.04) behind router for remote access by latptop (9.10) I am setting up desktop (9.04) behind router for remote access by latptop (9.10). Rationale: All of my files are on my desktop HD, but I am often out of my home needing to work on my files. It is becoming labour intensive to keep track of the files I make/change and try to copy them on my non-connected desktop/laptop.
Dream: Able to remote access and modify my desktop files from my laptop (while the files remain on the desktop). Request: A simple, GUI, basic, non-technical guide how to set it up!
What I know: 1.I was going to use the 'Remote Desktop' VNC connection under System->Preferences. However, if I understand this correctly, this only secures my computer (i.e. Locks the front door of my desktop) and the data streamed between them is not encrypted.[URL]..
2.Then I need to set up my router to accept the connection from my laptop.
3.Then I will need to use SSH to secure the info sent between them. This is the bit I don't really have a good grip on.
[Code]...
I've done apt-get install kde-full on a server, and would like to know how to set up remote desktop control for it. As I've never done something like this before through a console, I'm rather stumped and can't seem to find any information on this matter.
View 3 Replies View Relatedhow to connect fedora 10 using remote desktop? i have a notebook and a desktop. both machine is in same LAN. and Both machines are using fedora 10. i would like to access my desktop from my notebook. how to do this? i have installed the remote desktop. and vnc viewer. but couldn't get thorugh it...
i have done this.
1. sudo yum install vino
2. intall vnc viewer.
New Fedora 13 Install. I have Remote Desktop Enabled. I can access the machine from itself but not others on the network. I stopped the firewall, that did not work. I looked in hosts.allow and hosts.deny, no entries there. The vino server is running. There is nothing in /varlog/messages, dmesg or /var/log/secure, at least nothing I could find related to vino. What else can I check? The conf file in my home folder looks exactly like one on another machine where it is working. forgot to add the message I get when I try it from a remote machine is "The connection to host 192.168.1.100 was closed". So it appears something is actively rejecting the login.
View 6 Replies View RelatedThis is a strange problem, 2 Fedora 11 machines, both Dell's. On machine A, remote desktop is okay. On Machine B, remote desktop display is corrupt/unusable.
However, prior to upgrading to Fedora 11, both machines had Fedora 10, and, remote desktop on Machine A was corrupt and Machine B was okay.
Any idea what happened? Why did the upgrade fix one and break the other? Both machines where upgraded with Pre-upgrade. The two machines are in to separate locations, un-related to each other.
I am trying to set up a remote server on an old desktop that i have and i am running into problems. I have the packet installed but i can not get it to run. When ever I enter /sbin/service sshd start
I get Generating SSH1 RSA host key:[FAILED] and i can not for the life of me figure it out. Running fedora 12
I am a Linux newbie. I am trying to see if it is possible to access a windows pc through some form of vpn/rdp setup. My machine is dual boot with Windows XP. On Windows XP, I am able to connect to my office via VPN client to connect to my office, then Remote Desktop to my local machine on the network.. Is there some way for me to do this with Linux? I find it really annoying to have to boot to Windows just to access my work pc.
View 9 Replies View RelatedMost discussion of lightweight desktops seems to focus on cpu and/or gpu load. I want to ask a different question (though it may have the same solution): how to set up a secure remote desktop server for students to minimise network load. My current setup (gnome plus vncserver, tunneled over ssh) is certainly a bad choice, but I'm having trouble finding the right information about what to choose. My current best guesses:LXDE (not too unfamilar to students used to gnome)NX (generally said to give better compression) Is this a reasonable compromise? Is there a better solution? host server settings to reduce network load client settings the students could use to minimise network load security implications of distributing the nx ssh session key widely
View 1 Replies View RelatedWe're in the final process of building a home, and I had them setup a wiring box where all the coax and cat5 terminates into one closet, which will also house my server. Once we get moved in I'd also like to add speakers in each room to have house-wide music, and ideally I'd like the audio to also run into this box with the master input coming from the server as well.My thought was to setup the server with some basic desktop manager like Fluxbox and use that to drive audio throughout the house, whether it be Pandora, Sirius Radio, or whatever. Since the server will be headless I'll need it setup so we can remote into it from our laptops, but I wasn't sure if VNC or some other RDP variant would work. Ideally we'll need to access a unified desktop so traditional terminal services where each users gets their own desktop might not be ideal
View 1 Replies View RelatedMy home linux box is behind a Linksys WRT110 router. I have enabled the Remote Desktop from System-->Preferences-->Remote Desktop. I then run TightVNC from my WinXP box. As I wish to run a secure connection, my first obstacle comes from PuTTY.
In PuTTY, my settings are as follows:
Host Name(or IP address) Port
xxx.xxx.xxx.xxx 22
SSH-->Tunnels:
[code]....
I recieve "Network error: Connection refused" I have gleened all of this information from other boards and tutorials. I know there is something critical that I am missing.
I have recently installed fedora 14 and configured vpn to access my work network. I need to access some windows machines which although I can ping I cannot remote desktop into. When I go to Applications>Internet> Remote Desktop Viewer and put in the machine name (either just the machine name or the FQDN including the domain name) I get an error "Connection to <machinename> was closed".
View 4 Replies View Relatedis it possible in the standard remote desktop viewer in Fedora 14 to use RDP instead of VNC protocol? I know that Ubuntu provides this feature. I already installed tsclient and rdesktop but that didn't help.Before you say I have to use VNC: I know... I am just curious how I can set up RDP to connect to Windows based machines.
View 2 Replies View RelatedI have my main box, Ubuntu 10.04lts, and I am trying to use remote desktop viewer to see the desktop on a Windows XP machine. The machines are side by side The Ubuntu box is hardwired to my network router, and the XP machine is connected via wireless. Both get to the internet fine, and I can ping the Ubuntu box from the XP box. But, I cannot ping the XP box from the Ubuntu box, and Remote Desktop Viewer won't establish a connection to the VNC server I have running on the XP box.
View 6 Replies View RelatedFriday night I was working on some networking stuff between my two Fedora 14 boxes. I have my laptop and my desktop. on both machines I have "system-config-firewall 1.2.27" and "iptables" (i believe both come standard on F14?) I kept getting the same message as seen below before realizing perhaps I should check my firewall!
I added a rule for incoming and outgoing traffic on port 22 and was able to get in with no problems at all! however today I can't ssh into anything... I can't use "Remote Desktop Viewer 2.31.4" to vnc into the machine anymore. I can't remember the exact error message at this time, it's something close to "Connection was terminated" or "Unable to connect" I can update this message later.
last night I foolishly uninstalled the system-config-firewall and then uninstalled iptables to see if it was a simple firewall issue.... totally hosed my system <insert smiley!>
After reinstalling and realizing I didn't backup my documents <insert smiley!...again...> I started reinstalling all of my applications. I'm still unable to use ssh and I've tried to ssh my own computer.
Is this possible?
# ssh 127.0.0.1
ssh: connect to host 127.0.0.1 port 22: Connection refused
I know how to connect from Linux Ubuntu to windows by command rdesktop .. but is their a similar command from Ubuntu to Ubuntu where I can type the ipaddress & the port number ..
View 1 Replies View RelatedHow to configure Remote Desktop in CentOS 5.3 that allow desktop remote from Windows XP?
View 4 Replies View Relatedmy g/f was able to access her jobs computers from home in Windows. she'd go start->program->access->connect to remote desktop... (or something like that) in any event, i've found some programs in Fedora 14 that say they'd do the same, however i can't get it to work. in "remote desktop viewer" i'm trying to use 'VNC' protocol,and trying to put the ip in the first of the "Host" lines.
now, there might be another issue, is it possible she need more info than the ones she got in order to use LINUX remote desktop? she has (what she has written down as) Computer # 111.111.111.11 and then ';' and 4 additional numbers, so (for the sake of the example) computer#: 111.111.111.11;2222 she has a 'username' and a 'password'.
I recently started playing w/ remote desktop connections. W/ a lil persistence I have established connections over my network. Only thing is when connecting from my windows machine via (tightvnc viewer), to my linux desktop,(vncserver) I can only seem to get a remote "virtual login". I do not see and have access to the current login. I can however reverse the connection (starting vnc server) on the windows machine adding a client connect and have control of open over the windows system. Any idea's why I can only get a remote login to my linuz box?
View 6 Replies View Relatedi am a new user to Ubuntu and Linux for that matter. I am using ubuntu 9.10. I want to remote from my Ubuntu machine into my Vista desktop (Vista Ultimate).i can do so with ease using the various Ubuntu application through vnc. However, whenever I try to do so through RDP I am unable to do so. When I try to remote into the Vista machine through RDP it will launch the Vista login screen where I enter my user name and password. It always comes back saying that the password is incorrect even though the login is the same that is used to login everyday. It doesn't seem to be a firewall problem because I disabled it and get the same results. I also get the same results when using either a wired connection or a wireless connection on the Ubuntu machine.My normal network consists of the Ubunu notebook, my Vista Ultimate Desktop (wired to the router) and my Vista Ultimate Tablet PC on a wireless connection.
I might mention that I can remote using RDP from my Ubuntu notebook into into the Vista Tablet PC with no problem. But not the so with the Desktop. Always fails telling me that I am using an incorrect password. I am the only user on either Vista machine and as far as I can tell everything is set the same on both Vista systems (securrity, remote, etc.) unless I am missing something, which I apparently am.Not sure if it makes any difference but the Tablet pc has always run Vista but the Desktop was orriginally an XP and for the life of me I can't remember if I did an upgrade to Vista Ultimate or a clean install since it has been a year or so.
Alrighty, I have a couple of questions regarding use of the TSC for remote desktop connections. I'm connecting from my Ubuntu Desktop (Lucid) and i'm connecting to my Laptop (Windows 7) i'm running PC Tools Firewall Plus on the windows machine. The window's machine has remote assistance allowed. At the moment i'm just trying to get the TSC to work on my home network. I filled it out as follows:
Computer: Lappy's IP
Protocol: RDPv5
Username: ZachAdmin
Password: *My password*
Domain: Blank
Client Hostname: Blank
Now the first time I tried to connect, about 20ish seconds passed and "The connection has timed out" appears. So I went into my Firewall and sure enough it was blocking the UDP/TCP packets that my desktop was sending. So I temporarily allowed all UDP/TCP packets. Now when I connect "Connection Refused" immediately pops up. I go into my firewall and it's allowed both inbound and outbound packets from my laptop to my desktop and vis versa. So now i'm really stumped.
I have been trying and trying to get remote desktop to work without using a monitor connected to the server. I have the server set up to where it can be rebooted and everything perfectly fine remotely (as long as it has a monitor). Unfortunately, I need this to be not connected to a monitor-PERIOD. I would think this would be something to be working out of the box, but I guess not.
View 5 Replies View RelatedI have Ubuntu 10.04 (fresh install) and it is my work computer/Server and i'd like access to this PC from my home. But with Remote Desktop it only says i can do local.
I've look around and opened up port 5900 in my router. Set this IP to to static and forwarded the port to this computer.
I've read that unchecking the "configure network automatically to accept connections" as it seems to cause an issue in ports i've read. Still nothing.
Here is a screen cap of my settings
Uploaded with ImageShack.us
How can i allow access from my Windows Based PC to this computer over the internet?
I've been trying to work out a way to connect my kubuntu workstation at home into my kubuntu server at the office so I can control the desktop as I've no other way to control it (kubuntu server is installed on hyper-v server and cannot for the life of me get the mouse to work in the virtual environment)Anyway, I'm trying to use krfb via a SSH tunnel.I've read various posts, forums and how to guides and am stuck at what looks to be the, or almost the final hurdle.
View 9 Replies View RelatedWhat are the pros and cons of windows remote desktop compared to X-windows over SSH on linux?
View 1 Replies View RelatedIs there a way to only accept SSH Tunneled VNC connections from localhost? I would like to close port 5900 on my router and only have SSH open.
View 2 Replies View Relatedinstall ubuntu 10.04 desktop, configure remote desktop so I can connect from my Mac or Windows machine without being physically be at the ubuntu machine, and I won't have a dedicated monitor for the ubuntu box either. And I want to have root access to everything via remote desktop or VNC.What I have tried: system->preferences->remote desktop to enable remote desktop, I can connect and see the desktop, the mouse clicks would only show on the directly connected monitor, not in my VNC session.Then I tried to install TightVNC server, start a at display :1, I can also connect, but every time any action requires a root access, such as installing a package using Ubuntu Software Center, the root password prompt would only show up on the directly connected monitor.
I also install xrdp package, and followed instructions here: [URL]It actually worked using Remote Desktop application from my Mac or Windows box for a little while until I restarted the machine, thinking I can unplug the monitor and connect via remote desktop from then on. Then it stopped working.
I actived Remote Desktop on my ubuntu laptop and i want it to be reacheable from remote out of LAN so i installed hamachi but i'm not sure how to make it work..
i installed it on the laptop and i create the network (id+pwd) then i installed hamachi on the pc (with windows) and i login to the network and it gives me the ip (5.225...etc) as you can see from the client i cant ping at this point could i acceed at the remote desktop with that ip?
I have a Laptop with Ubuntu 10.04 and a Netbook with Remix 10.04. I'm trying to connect by Remote Desktop from the Laptop to the Netbook. Remote Desktop wasn't installed by default in Remix so I installed it via software centre. I then configured Remote desktop in both machines. When I do Connect on the laptop all I get is a black screen and then it closes with the message "Connection to host was Closed". This happens when I try either VNC or SSH. The other thing that's odd, although both machines are on the same WLAN and I checked "configure networkautomatically to accept connections" on both machines, the Laptop doesn't find the other machine in Remote Desktop. What am I/have I done wrong or have I ommitted something?
View 4 Replies View RelatedI just set up Remmina the other day to be able to access my desktop remotely. However, I can only do this when I am connected to my home network. Is there a way to set up Remmina so that I can connect to my desktop remotely from outside my home network?
View 4 Replies View Related