Ubuntu Networking :: Cannot Remote Vista Desktop Using RDP
Jan 26, 2010
i am a new user to Ubuntu and Linux for that matter. I am using ubuntu 9.10. I want to remote from my Ubuntu machine into my Vista desktop (Vista Ultimate).i can do so with ease using the various Ubuntu application through vnc. However, whenever I try to do so through RDP I am unable to do so. When I try to remote into the Vista machine through RDP it will launch the Vista login screen where I enter my user name and password. It always comes back saying that the password is incorrect even though the login is the same that is used to login everyday. It doesn't seem to be a firewall problem because I disabled it and get the same results. I also get the same results when using either a wired connection or a wireless connection on the Ubuntu machine.My normal network consists of the Ubunu notebook, my Vista Ultimate Desktop (wired to the router) and my Vista Ultimate Tablet PC on a wireless connection.
I might mention that I can remote using RDP from my Ubuntu notebook into into the Vista Tablet PC with no problem. But not the so with the Desktop. Always fails telling me that I am using an incorrect password. I am the only user on either Vista machine and as far as I can tell everything is set the same on both Vista systems (securrity, remote, etc.) unless I am missing something, which I apparently am.Not sure if it makes any difference but the Tablet pc has always run Vista but the Desktop was orriginally an XP and for the life of me I can't remember if I did an upgrade to Vista Ultimate or a clean install since it has been a year or so.
View 3 Replies
ADVERTISEMENT
Nov 11, 2010
i've been trying to connect to my stationary computer from my laptop. My stationary computer uses Windows Vista 32 and my laptop uses Ubuntu 10.10. I'm trying to connect to my vista computer without luck, i have installed RealVNC on my vista, opened port 5900, 5800 and 3389 on my router. My laptop is Wireless and my stationary is on cable. Tried using Terminal Server Client without luck, i get this message:
Code:
Connected to RFB server,using protocol version 3.8
Performing standard VNC authentication
Authentication Successful
vncviewer:VNC server closed connection
I've tried adding my laptop static ip on RealVNC in the config. I have shut down windows firewall, I'm running no security, i have opened for Remote connection by right clicking My computer and in network connection. Im Running a Linksys WRT54GL with Firmware: DD-WRT v24-sp2 (10/10/09) std
View 5 Replies
View Related
Mar 12, 2010
I have a PC running Opensuse 11.0 Linux. I currently login using ssh with putty. However this is a command line login. How to do a remote xserver login from windows to run a gnome or kde session. what software should I use?I have the root password for the Linux PC and admin privileges on vista.
View 2 Replies
View Related
Nov 20, 2010
I have my main box, Ubuntu 10.04lts, and I am trying to use remote desktop viewer to see the desktop on a Windows XP machine. The machines are side by side The Ubuntu box is hardwired to my network router, and the XP machine is connected via wireless. Both get to the internet fine, and I can ping the Ubuntu box from the XP box. But, I cannot ping the XP box from the Ubuntu box, and Remote Desktop Viewer won't establish a connection to the VNC server I have running on the XP box.
View 6 Replies
View Related
Nov 4, 2009
This is most likely a Vista config thing, but basically I'm using "net rpc SHUTDOWN -f 192.168.xxx.xxx -U username%password" to remotely shutdown both XP and Vista machines.
The XP machines shutdown fine. They have the same local user account names and passwords as the Vista machines. The Vista machines repond with NT_STATUS_LOGON_FAILURE.
I've checked (way too many times) that my usernames and passwords are correct, Ive disabled the Windows Firewall in Vista, and I've been googling for two days and can't really remember all the other things I've tried.I'm sure it's probably some kind of security thing in Vista, but I barely ever use Vista and don't know where to go from here.
View 2 Replies
View Related
May 10, 2009
I know how to connect from Linux Ubuntu to windows by command rdesktop .. but is their a similar command from Ubuntu to Ubuntu where I can type the ipaddress & the port number ..
View 1 Replies
View Related
Jun 17, 2010
Alrighty, I have a couple of questions regarding use of the TSC for remote desktop connections. I'm connecting from my Ubuntu Desktop (Lucid) and i'm connecting to my Laptop (Windows 7) i'm running PC Tools Firewall Plus on the windows machine. The window's machine has remote assistance allowed. At the moment i'm just trying to get the TSC to work on my home network. I filled it out as follows:
Computer: Lappy's IP
Protocol: RDPv5
Username: ZachAdmin
Password: *My password*
Domain: Blank
Client Hostname: Blank
Now the first time I tried to connect, about 20ish seconds passed and "The connection has timed out" appears. So I went into my Firewall and sure enough it was blocking the UDP/TCP packets that my desktop was sending. So I temporarily allowed all UDP/TCP packets. Now when I connect "Connection Refused" immediately pops up. I go into my firewall and it's allowed both inbound and outbound packets from my laptop to my desktop and vis versa. So now i'm really stumped.
View 7 Replies
View Related
Jun 20, 2010
I have been trying and trying to get remote desktop to work without using a monitor connected to the server. I have the server set up to where it can be rebooted and everything perfectly fine remotely (as long as it has a monitor). Unfortunately, I need this to be not connected to a monitor-PERIOD. I would think this would be something to be working out of the box, but I guess not.
View 5 Replies
View Related
Jul 13, 2010
I have Ubuntu 10.04 (fresh install) and it is my work computer/Server and i'd like access to this PC from my home. But with Remote Desktop it only says i can do local.
I've look around and opened up port 5900 in my router. Set this IP to to static and forwarded the port to this computer.
I've read that unchecking the "configure network automatically to accept connections" as it seems to cause an issue in ports i've read. Still nothing.
Here is a screen cap of my settings
Uploaded with ImageShack.us
How can i allow access from my Windows Based PC to this computer over the internet?
View 1 Replies
View Related
Aug 2, 2010
I've been trying to work out a way to connect my kubuntu workstation at home into my kubuntu server at the office so I can control the desktop as I've no other way to control it (kubuntu server is installed on hyper-v server and cannot for the life of me get the mouse to work in the virtual environment)Anyway, I'm trying to use krfb via a SSH tunnel.I've read various posts, forums and how to guides and am stuck at what looks to be the, or almost the final hurdle.
View 9 Replies
View Related
Aug 3, 2010
What are the pros and cons of windows remote desktop compared to X-windows over SSH on linux?
View 1 Replies
View Related
Oct 19, 2010
Is there a way to only accept SSH Tunneled VNC connections from localhost? I would like to close port 5900 on my router and only have SSH open.
View 2 Replies
View Related
Oct 20, 2010
install ubuntu 10.04 desktop, configure remote desktop so I can connect from my Mac or Windows machine without being physically be at the ubuntu machine, and I won't have a dedicated monitor for the ubuntu box either. And I want to have root access to everything via remote desktop or VNC.What I have tried: system->preferences->remote desktop to enable remote desktop, I can connect and see the desktop, the mouse clicks would only show on the directly connected monitor, not in my VNC session.Then I tried to install TightVNC server, start a at display :1, I can also connect, but every time any action requires a root access, such as installing a package using Ubuntu Software Center, the root password prompt would only show up on the directly connected monitor.
I also install xrdp package, and followed instructions here: [URL]It actually worked using Remote Desktop application from my Mac or Windows box for a little while until I restarted the machine, thinking I can unplug the monitor and connect via remote desktop from then on. Then it stopped working.
View 7 Replies
View Related
Feb 4, 2011
I actived Remote Desktop on my ubuntu laptop and i want it to be reacheable from remote out of LAN so i installed hamachi but i'm not sure how to make it work..
i installed it on the laptop and i create the network (id+pwd) then i installed hamachi on the pc (with windows) and i login to the network and it gives me the ip (5.225...etc) as you can see from the client i cant ping at this point could i acceed at the remote desktop with that ip?
View 6 Replies
View Related
Feb 16, 2011
I have a Laptop with Ubuntu 10.04 and a Netbook with Remix 10.04. I'm trying to connect by Remote Desktop from the Laptop to the Netbook. Remote Desktop wasn't installed by default in Remix so I installed it via software centre. I then configured Remote desktop in both machines. When I do Connect on the laptop all I get is a black screen and then it closes with the message "Connection to host was Closed". This happens when I try either VNC or SSH. The other thing that's odd, although both machines are on the same WLAN and I checked "configure networkautomatically to accept connections" on both machines, the Laptop doesn't find the other machine in Remote Desktop. What am I/have I done wrong or have I ommitted something?
View 4 Replies
View Related
Mar 13, 2011
I just set up Remmina the other day to be able to access my desktop remotely. However, I can only do this when I am connected to my home network. Is there a way to set up Remmina so that I can connect to my desktop remotely from outside my home network?
View 4 Replies
View Related
Apr 18, 2011
I'm trying to configure my machine to allow remote desktop connections from outside my home network so i can connect at school, work etc. However, when setting up my remote desktop it says "Your desktop is only reachable over the local network. Others can access your computer using the address localhost." (see attached screenshot) My other linux machine has the same problem, but provides the IP address, is there something i'm missing?
View 2 Replies
View Related
Apr 22, 2011
I have an Ubuntu Desktop machine that I have to frequently access remotely - sometimes after it has rebooted. I'm not concerned about physical security for the machine but I am concerned about remote security.
Since normal VNC isn't activated until after the login, what is the best way to go about remotely accessing this machine's desktop without having hands on it?
I've tried setting auto-login but then I run into the keyring not unlocked problem. Disabling the keyring or setting a blank password seems like a bad idea.
View 1 Replies
View Related
Jun 21, 2011
Iv just installed 10.10 desktop 64bit to a laptop with drobo attached that i'll be using as a fileserver for the household.Im using VNC for remote administration since it comes baked into Ubuntu already.When connecting to the machine from Windows clients using Real/Tight/Ultra VNC, all clients experience a large amount of screen artefacts after any sort of gui interaction takes place.Iv already disabled compiz effects since VNC still doesn't work with them enabled.Iv included an image of what im seeing from the RealVNC Viewer, though both UltraVNC and TightVNC display the same issue.
View 2 Replies
View Related
Feb 1, 2010
For a Secure Remote Desktop on Ubuntu 9.10 here is how I did it using OpenSSH, FreeNX and a router with DD-WRT v24. Pic of it in use at bottom of post, transferring a file and remote desktop at the same time.
For the purposes of this guide I will use a Desktop as the Server (Host) which is at home. The Client will be a Laptop that I can use to control the Desktop remotely. First you should already be familiar with the Terminal which is where you enter commands (anything in a "Code:" box).
In Ubuntu it is in Applications > Accessories > Terminal In Kubuntu it is usually on the lower left taskbar and is called Konsole I am using Ubuntu so you may have to make some adjustments to this guide if you are not using Ubuntu. Installing OpenSSH (for the rest of this guide I will refer to it as only SSH)
[Code]...
View 9 Replies
View Related
Feb 17, 2010
I have 4 boxes on a local network: 2 with XP only, 1 with Ubuntu 9.10 only, and 1 with both. All boxes can share folders, set up with share-admin instead of using Nautilus right-click properties for each folder. I can see and control the remote desktops on all boxes, to all other boxes, from all other boxes,with one exception: I can only access the XP desktop on the dual boot box, not the Ubuntu desktop. When I try I get: "Connection to host 192.168.1.102 was closed." I am refused access to the Ubuntu desktop in this manner from both the other Ubuntu machine, and from both XP machines.
My setups are basically plain vanilla with routine installs of Ubuntu 9.10. On the XP machines I am using TightVNC on the XP machines to view both other XP desktops, and the Ubuntu desktop that is accessible. On both Ubuntu setups I am using (I suppose) vino and vinagre, and have completely re-installed what I think is the relevant software. There is no firewall running on the Ubuntu dual boot, when I check ufw. For reasons I cannot determine the inaccessible Ubuntu desktop is not providing its own address but instead in the Remote Desktop config dialogue it identifies itself as 27.0.0.1 which I think is the loopback id. I know so little about this sort of networking that I am not giving all relevant info, but I still thought I'd try.
View 1 Replies
View Related
May 27, 2010
I need to remotely control my parents' computers to tech support them.My parents use Windows (XP) while I use Linux (Sidux) intuitive application since this is my first attempt at this:
-free
-preferably thru browser
TeamViewer and LogMeIn turn up in my search. Seems like these two are the most popular. How do they stack up to each other?
View 5 Replies
View Related
Jul 7, 2010
Does anyone know what could be causing a Remote Desktop connection to a 10.04 box to be closing after some period of time? I have three systems all running 10.04 with Remote Desktop enabled. I'm using UltraVNC on Windows 7 to connect to them. If I open a connection and leave it open for a long time (like overnight, for example), when I come back in the morning, I still see the VNC window but as soon as I click on it, it closes. I can immediately open a new connection to the box but it now shows two active connections. At first I was thinking maybe there's an idle timeout value but given that Ubuntu still seems to think that the original connection is active, maybe the problem isn't on the Ubuntu side but on the UltraVNC side?
View 1 Replies
View Related
Aug 12, 2010
I have a mate who runs the IT in his office. He has recently set up and secured the network but now has an issue logging in to the network from home. Here is the message I got from him regarding the set up and what he is having specific issues with.
I was really pleased with the results on my Pen Test; the office itself is a pure MS environment but the testers all use Ubuntu 9.10 to hack with. The main tools of choice are Nessus and Ophcrack with a bit of NMap. It's pretty scary what you can do with just these tools. I had a Wireshark trace running all the time and it's fascinating to watch how these guys crack open a system. The only really major change I've had to implement on my network is to force the use of SSL as a transport layer for our remote desktop sessions. This has forced me to start using MS RDP Client 5.2 because it can use certificates on the session. The problem I've got now is that the Terminal Client in Ubuntu can't do this so I can't remote in from home on my Ubuntu laptop.
View 1 Replies
View Related
Nov 9, 2010
is there any apps compatible with remote desktop? So my xubuntu system can connect to my windows system using the existing set up for remote desktop... or do I need to install a new client/server or thing on both systems? I do not mind doing that if you can recommend a good client/server but would prefer to just connect to the existing remote desktop if possible
View 9 Replies
View Related
Mar 8, 2011
I have a remote desktop app for my ipod that i use every now and then, but after about a week and a half of not using remote desktop on either my ipod or my computer, it seems to have stopped working. the problem is with my computer rather than my ipod. when i go to menu>system>preferences>remote desktop, the area where it is supposed to give you the ip address, or whatever it is to connect remotely, is no longer a number, but just the word "localhost". i only saw this after my ipod told me it could not find the host, so i checked and thats when i saw localhost. putting that into the remote desktop app did nothing, so i tried my ip address and that didnt work either. clicking on "localhost" brings up evolution mail which wants me to send it as an email, strangely. not sure whats going on here.
View 2 Replies
View Related
May 4, 2011
i just slammed ubuntu 11.04 onto a spare server i had and im having a real issue with remote desktopping from my Win7 computer, ive checked the settings for the remote desktop server on 11.04 and all seem fine, i go to connect to it using tightVNC from my win7 machine, ask's for password, fill that out then click connect, and as soon as i hit connect it connects for about 1 second, then says there was an error contacting the server, i checked 11.04 and it then says that i can only connect via local host and not the IP address anymore.
View 5 Replies
View Related
Jul 18, 2011
I need to securely control my home computer from work. My home computer is connected to the internet via a wireless router using Tomato. I'm using the latest Ubuntu on both ends. Is the Remote Desktop that's installed by default good enough? What settings do I need for my home router to safely allow my remote connections and not leave it open to intruders?
View 1 Replies
View Related
Feb 8, 2010
How to configure Remote Desktop in CentOS 5.3 that allow desktop remote from Windows XP?
View 4 Replies
View Related
Feb 23, 2011
my g/f was able to access her jobs computers from home in Windows. she'd go start->program->access->connect to remote desktop... (or something like that) in any event, i've found some programs in Fedora 14 that say they'd do the same, however i can't get it to work. in "remote desktop viewer" i'm trying to use 'VNC' protocol,and trying to put the ip in the first of the "Host" lines.
now, there might be another issue, is it possible she need more info than the ones she got in order to use LINUX remote desktop? she has (what she has written down as) Computer # 111.111.111.11 and then ';' and 4 additional numbers, so (for the sake of the example) computer#: 111.111.111.11;2222 she has a 'username' and a 'password'.
View 1 Replies
View Related
