Fedora Networking :: Ganging Two Ethernet Conections Togeather?
Mar 12, 2010Is it possible to gang two Ethernet connections together as with dare I say Win 7?
View 5 Replies
ADVERTISEMENT
Ubuntu Networking :: Restarting The System / Wifi Conections Aren't Able To Be Detected?
Jan 3, 2011I have a problem with my BROADCOM BCM4311 802.11b/g WLAN... I made a clean installation of Maverick Meerkat and everything runs perfect except the card drivers... then I investigated almost a week on the net and finally the problem was solved (I made the installation of some drivers on Synaptics tool, then I wrote some codes on the Terminal to activate the light to turn it blue and the Wi-Fi IS ON AND WORKS!).
I thought everything was ok, but when I restarted the laptop, the wifi conections aren't able to be detected so I must re-install the card driver to get it active again :S. I really don't know why the card drivers works only when I install them, because restarting the system make them simply don't work.
I read something about changing my user's state (it was 'personalized') to 'administrator', but nothing happened.I searched on Ubuntu's web but nothing works.It's a Compaq Presario V3000.
General :: Ports Unreachable For Online Conections
Mar 21, 2011i'm trying to run a server for a game, that requires a few ports open (*since i connect to the internet with a router); for example one of the ports that needs to be open is "8888". But i tryed opening it thru my router localhost and it doesn't work (d-link DIR-400), so i was thinking if there's any way to open the ports of the router directly from Ubuntu; maybe console or program?for example for windows there's (Smart Port-fowarding) wich opens the ports you want without goint thru the router page.
View 5 Replies View RelatedUbuntu Networking :: User Interface Changed And It Defaulted To Ethernet And Now It Won't Letting To Go Back On Wireless - Disable Ethernet?
Sep 1, 2011My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies View RelatedFedora Networking :: Very Slow Ethernet In 11 X64 (NFS)
Jul 26, 2009I just installed a fresh copy of Fedora 11 x64 on my Dell XPS M1530. Last week I purchased a NAS device and backed up my entire Fedora 9 x86 system on it. I have an NFS mount that I'm restoring my data from.
The first thing I noticed after installing is that downloading of very large files (several MB to several GB) over my wired network is extremely slow. What I'm seeing is that it will download 3 - 5MB then pause for several seconds and download another few MB and so on. If I download a lot of small files from the NAS device it works fine and very fast. If I upload large files to the NAS they upload fast. If I boot into Vista and download large files from the NAS it is fast. If I use my wifi card to download large files from the NAS it downloads OK (not too fast but it is wifi so naturally slower).
In Fedora 9 I did not have this issue. I'm not sure if the issue is specific to NFS or if it is will all large files via the ethernet port (I don't have a way to test at the moment). lspci says 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12). dmesg doesn't indicate any issues.
Fedora Networking :: No LAN Using Ethernet Port
Jul 29, 2010I can't figure this out for the life of me. I am new to Linux too. Wireless works fine. I plug my Ethernet in and turn off wireless and I cant surf the web, download, etc...Network Manager finds the wired network under eth0 and it works perfect on my non-linux desktop (nervous to even mention Vista around here). Firewall was set up with basic setup (I didn't make any changes). I have a Sony vaio VPCCW21FX with fedora 13. Can anyone point me in the right direction?
View 10 Replies View RelatedFedora Networking :: Ethernet Is Not Working
Oct 28, 2010After installing fedora 13(x86_64) in my new acer aspire timelinex 4820T laptop , I have seen that the ethernet is not working. Network manager shows that "no network devices available".
View 2 Replies View RelatedFedora Networking :: No Ethernet On Live CD
Nov 3, 2010I have been learning linux for a year on ubuntu. well, it has been nice but I want a yum centric distro because I really need to learn redhat. anyway, I downloaded the 64bit fedora 14 and I neither get a dhcp or can get ethernet working manually. I can manually assign an address gateway and dns but I cannot ping the gateway, it has been the same address for 5 years so I am certain I am putting the correct settings in (plus I get no ethernet light on the linksys router). I am thus reluctant to wipe clean and move to fedora.I am not sure how to determine my card so I am including this dmesg info for you smart people. Btw ubuntu 10.10 had issues with the ethernet too, I had to use the kernel from 10.04 until a few days ago, after which a software update (of I don't know what) seemed to solve the issue. Are people not responding because I mentioned ubuntu?
View 2 Replies View RelatedFedora Networking :: Ethernet Will Not Become Active
Jan 5, 2011Currently I am working at a college as a student worker, and one of the classes that needs to take place requires that Fedora 12 be installed. Now, this isn't greatly important, but so far on a few of the installs I cannot get the Ethernet device to actually become active. I've tried restarting the computer, reinstalling Fedora 12, and going into the actual network area to click on "Activate" but it is grayed out. So currently, a few machines cannot connect to the internet - including the professor station. I'm not entirely sure what to do here, since most other posts I have read reported that they were able to actually click on "Activate" and it would work.
Right now, the computers are connected to the internet. The jacks do work as they were tested with computers that are able to connect to the net themselves. These computers NICs do work too as we have separate hard-drives in them booting into XP, which do connect to the net without problem.Any help would be appreciated. If anymore information is required, please let me know. I'll do my best to provide you with this information.
Fedora Networking :: No Wireless Or Ethernet F14 Or F15?
Jun 4, 2011have used f14 since it came out with no problems, little niggles and whatnot have been sorted by reading these forums and googling but I'm now out of my depth.problems started when I installed f15 from disc and no ethernet or wireless was useable. Inserting wire leads to it announcing it's unplugged again a few mins later and trying to connect wireless never resolves.I thought it was a quirk and would go back to f14 for a few weeks but after re-installing that was now the same. So I tried live discs of crunchbang and debian6 -same. However puppy linux sees the ethernet fine.So my question is how do I enable ethernet and/or wireless in f15 (installed again after checking with puppy)?
View 8 Replies View RelatedFedora Networking :: Access Data Through SSH - Ethernet?
Jan 23, 2010A while back I've been playing with the idea of setting up one of my machines as some sort of data server and would like to access it through SSH. I've already conducted some tests through the wireless router and apparently on the software side there are no issues with the SSH thing. I also noticed that since the same adapter was in use (wireless) SSH 'fought' with the Internet for the bandwidth
In order to avoid the aforementioned problem and also in the spirit of enhancing security I am thinking of setting up the following network scheme with two laptops and two routers (a wired and a wireless one):Both laptops would receive the Internet service through the wireless router. Both laptops would be connected through their Ethernet ports to the other router. The wired router wouldn't be connected to the Internet. Would this set up allow me to use SSH only through Ethernet thus eliminating possible bottlenecks in the wireless network? I am operating in the assumption each machine would have two different IPs (one per router), is this correct?
For some weird reason (default network device?) when I connect the Ethernet cable to the laptop, although NetworkManager claims to be still connected to the wireless network, I can not connect to Internet (the wired router has no Internet BTW). But if I unplug the Ethernet cable the Internet continues through the wireless network.
Fedora Networking :: How To Rename Ethernet Interface
Jun 20, 2011I'm just installed Fedora 14 64-bits into a server which come with Multiple network interfaces, I'm found that the naming of each network interface is not in sequences in what I'm thought (e.g: the on board network interfaces name as Eth5 and Eth6, the additional card ethernet port name from Eth0 - Eth1 and etc). How to name the interfaces as what I wish to? What should I install to allow me to rename the interfaces.
View 2 Replies View RelatedNetworking :: Configure Ethernet Connection Between 2 Fedora 12 Pcs?
Mar 5, 2010I want to connect my pc to my laptop. I have fedora 12 installed in both system.How can I do this?
View 14 Replies View RelatedFedora Networking :: F11: Ethernet Is Enabled But Can't Make A Connection?
Jun 27, 2009I just fresh installed Fedora 11, and tried to connect via ethernet. I connected the cable and connection was started (in the network managed the two gray circled turned green) but then instead of connecting me the connection was aborted. I am behind a router if it helps and made sure eth0 is enabled. PS this is the output of "service network start":
Quote:
[root@Gal-PC subsys]# service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
[code]......
Fedora Networking :: Bonding Configuration Ethernet Fail Over
Oct 19, 2009I instaled HPML350 G6 server. I would like to configure ethernet fail over. I got the script from my friend and configured and restarted the network services. I am getting the error message that ""Deprecated configure file /etc/modprobe.conf, all config files belonging to /etc/modprobe.d". System automatically assigning IP address also.
View 2 Replies View RelatedNetworking :: Fedora 14 - Ethernet Interface Does Not Get Activated Upon Reboot?
Nov 19, 2010I have installed Fedora 14 about 4 days ago. I have set all the networking parameters like dns path, hostname etc. I have also ensured that I select the check-box for "Enable automatically when system starts" for eth0 interface. But weirdly, whenever I boot my system(or restart), I see that the interface eth0 is disabled. I have to manually enter as root and enable it, each time I boot/reboot my system. Why is this happening? Could you please suggest a way so that I have eth0 interface enabled always when I boot up?Also, my domainname also is not boot-persistent. What steps should I take to ensure that the domainname set once persists across reboots?
View 12 Replies View RelatedFedora Networking :: Finding Out If Cable Removed From Ethernet Connector
Feb 2, 2009How can I find out programmatically if a cable has been removed from an ethernet connector where the interface is "up" ??? Without using ping of course.
Sidebar question, if I have two interfaces on the subnet how can I force a ping out a specific interface? Say, I have 192.168.5.14 and 192.168.5.13 and I want to throw a ping out *.13 and not *.14 ..
Fedora Networking :: Ethernet Connection Sabotaged By SELinux - AVC Denial ?
May 26, 2009I installed Fedora to a desktop with a hardwire ethernet connection to my router. When I ran the live CD it connected fine. When I boot now I have no connection, and when I try to connect I get this "AVC Denial" message and some mumbojumbo about SELinux is preventing nm-dhcp-client to read libdbus-glib blah blah blah. The troubleshooter app is no help to me at all. This is extremely frustrating. A couple of weeks ago I did an install to this same computer and had no problem at all. The only difference is that this time I wiped all of my old distros from the HD, and made separate /, /var, /boot, /tmp, and /usr partitions (in addition to the old /home partition which I kept.) I don't know how that could be causing this problem, but it's the only thing different about this install. Should I just go back to putting everything but /home on one partition?
View 5 Replies View RelatedFedora Networking :: FC11 Not Auto Detecting Ethernet Interface
Jun 10, 2009On FC10, when system boots up, it would auto detect (from DHCP) and configure eth0.
This does not happen on FC11, but I can manually configure the interface. The entries in /etc/sysconfig/network-scripts/ifcfg-eth0 are identical on both OS releases.
Don't know if this is related, but when I run System->Administration->Bootloader, it fails system-config-boot - missing module kudzu.
Fedora Networking :: System Does Not Recognize Ethernet Card (Eth0)
Jan 17, 2011I had F14 up and running as a server working awesome. I shut it down and moved it. Now on start up, system doesn't seem to recognize my ethernet card...eth0. How to get my ethernet card back online?
View 14 Replies View RelatedFedora Networking :: Ethernet - Suddenly Lost Internet Connection
Jun 16, 2011I installed Fedora today, and I automatically had internet connection, I never had do configure anything myself. Then, I was playing around with VPN for a good while (trying to set up the VPN connection to my University), and now, I suddenly lost my connection to the internet!
But only Fedora can't connect anymore, the Windows PC has connection as well as my Mac OS X (I dualboot Linux on my MacBook). The Ethernet connection works as well, when I unplug the cable, Fedora gives me a message, but I just don't get into the internet!
Does anyone have an ides what I have to do? I don't know anything about network connections and I'm new to Linux...
I already restarted the Computer, but that didn't work, and Google didn't really held either.
Fedora Networking :: Ethernet Connection Stopped Working - Cannot Find Server
Jul 23, 2009After using fedora 11 for a month or two now the ethernet gave out on me tonight. However if I switch to my ubuntu or windows XP install it runs fine. I made no recent changes to network connections, and no installed programs that should effect it.
kernel version: 2.6.29.6-213.fc11
default connection: eth0(and only connection)
ifcfg-eth0:
# Networking Interface
DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:1F:C6:DB:05:0C
ONBOOT=yes
TYPE=Ethernet
IPV6INIT=no
USERCTL=no
NM_CONTROLLED=yes
NAME=eth0
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
DNS1=192.168.1.254
PEERDNS=yes
PEERROUTES=yes
I have tried, restarting, older kernel, restarting services, and clearing the DNS Cache. The specific error I get is that "Firefox can't find the server", and most other applications return similar. I can however ping websites still. All other computers on the network are running fine, and booting into another system the internet will work. Just not for fedora.
Fedora Networking :: Make The Ethernet Connection By Hand In The Command Line Mode?
Apr 12, 2010The GUI for network configuration of Fedora is marvellous such that the configuration is almost fool-proof. But how can I make the connection by hand in the command line mode? It goes okay except the very last step. When I disconnect the eth0 interface from the right-hand side of the desktop GUI, I tested how to bring it back by command line but I failed. When disconnected, the ifconfig still shows the eth0 interface, with just the ip address portion changed.
I tried "ifconfig eth0 192.168.1.xx" to give it an ip address but the connection is still down even if the ifconfig shows an ip address for the eth0 interface. Then I tried "/etc/init.d/network restart" and "ifup eth0" and also "route add defaut gw 192.168.1.1" but none of these could accomplish the same work as a single click on the GUI to connect. I am very curious about how to do it in the terminal.
Fedora Networking :: DHCP Lease Renewal Failing On Wired Ethernet Connection?
Aug 1, 2010I'm running an up-to-date Fedora 12 machine with the Gnome desktop (meaning with Network Manager). My network connection is a wired ethernet to a switch which then connects to a Netgear router. For some reason, this machine can't renew its leases with DHCP, so NetworkManager deactivates eth0, taking my machine off the network. I have to click Network Manager and enable eth0, which seems to work every time.
How can I fix it? Here are the relevant bits from /var/log/messages showing a failed DHCP request and then the successful renewal.
Code:
Aug 1 04:00:08 ironton dhclient[12452]: DHCPREQUEST on eth0 to 192.168.1.1 port 67
Aug 1 04:00:08 ironton dhclient[12452]: DHCPNAK from 192.168.1.1
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): DHCPv4 state changed reboot -> expire
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): device state change: 8 -> 9 (reason 6)
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> Marking connection 'System eth0' invalid because IP configuration expired.
[Code]...
Fedora Networking :: Network Manager Didn't Recognize NVidia MCP67 Ethernet [10de:054c] (rev A2)?
Oct 25, 2009The Network manager didn't recognize my eth0 device as a maned device.In shell I can use my eth0 but not by Gnome Network Manager.My device is nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2) and I'm running a Fedora 11. On previous version like, Fedora 10 an 9 this board was managed normally by network manager.Anyone already set up this board on Network Manager ?My Notebook is a HP dv2736us and I'm using a Fedora 11 64bits.
View 6 Replies View RelatedFedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card
Dec 4, 2010Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
Fedora Networking :: Configure ADSL Using Use Fc10 - Ethernet Cable <Asus Am608 ADSL Modem>
Aug 6, 2009I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedUbuntu Networking :: Crosswire Or Ethernet - Make A Server Box My Entrypoint To My Networking
Mar 1, 2010Im trying to make an ubuntu server box my entrypoint to my networking. Meaning itll function as a server, a firewall, and a gateway. so i already installed dhcp3 and a dns server.
I have 2 ethernet cards in it. So now i wonder, should i the second card into a router's modem/wan port and make the router a switch? or should i plug it into one of the routers lan ports?
Ubuntu Networking :: Dual Ethernet Networking - Lose Internet Connectivity?
Apr 18, 2011I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
Ubuntu :: Share Internet From 1st Ethernet AND To 2nd Ethernet And Wifi Card?
Feb 8, 2011I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.
DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)
The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).