May I please have some help configuring wireless connectivity?I just moved and went from connecting to a LAN infrastructure to connecting with a wireless cable modem. The modem is dual-purpose, it has two ports, one for an Ethernet cable, and an access point for a wireless connection. The ISP is CableOne. My laptop, which I use most often, is wireless capable, and I want to use the wireless feature. The laptop is running Fedora 13 KDE, with a VirtualBox virtual drive running WinXP.
I have used NetworkManager to create a wireless connection and name it. I have also used WPA encryption for this because I don't want anybody else using my bandwidth. Moreover, I have tried no encryption and WEP, all to no avail.
Wife's laptop has AR5001 Wireless Adapter laptop model is Toshiba Satellite A215
Problem : Wireless networking randomly loses connectivity and can not regain connectivity, the only apparent solution is a full power down , this is not even certain to work. The card works under Windows, she hates Windows. (I love her for this) I know it's not faulty hardware , because it will work for days on end under Windows without problems.
Things I've tried : madwifi drivers (any and all versions available) : These increase stability of the signal and seem to delay the inevitable however it still happens. When using these drivers the only option is to unload them modprobe -r then reboot then remove them again and re add them. It makes no sense why this works, and if I don't remove them prior to rebooting it will not work.
ATH5K drivers : These are pretty much junk, results are unpredictable at best, sometimes it will work perfectly for a few hours, sometimes it will not work at all. Nothing is repeatable, I can't seem to force whatever condition is causing this. rfkill does not show the wifi being blocked (hard or soft), unblocking it anyway does nothing, only way to make this work and it's iffy is to fully power down wait 5-10 minutes turn it back on and it MAY decide to work.
Firmware update : Updated the Toshiba BIOS to the latest version of the firmware 2.0 no joy here either. Same issue both sets of drivers.
Tried different distros and kernels : I've tried Mint 9, 10 ,11 ; Ubuntu 10.10, 10.04 , 9.10 and 11.04 (which is currently installed) , Fedora and OpenSUSE. All are giving the same problems. I have also tried a slew of different kernels no joy from any of them (I'm not at the computer with the issue now I will post exactly what kernel versions I've used when I have access to the machine).
Another useful bit of information, the hard switch to disable/enable wifi WILL disable it but turning it back on does absolutely nothing. The hotkey does nothing at all. The bios does not have an option to disable or enable the wireless card.
I will also post the typical lsmod , lspci , iwconfig all that good stuff when I get back to the computer in question. I'm probably just going to buy a PC card for it and give up on that one, but this is driving me insane and I would really like to see it resolved even if I do replace the hardware.
The problem is I have a wireless Belkin router which I can connect to, but after being connected for a few minutes the net disappears (cuts from the router) and my laptop will have to reconnect again to the router for internet to work again. After a few minutes (or seconds in some cases) the connectivity loss will happen again over an over.
How to fix this problem or some things I can try, I've tried updating to two different firmwares, two different channels and resetting the router. The biggest problem I find is that this happens on both my laptop, another laptop in the house and also my tablet PC but doesn't happen on two other laptops in the house, I've also tested with windows 7 and Ubuntu with my laptop.
My laptop wireless card is Atheros AR9285 802.11b/g/n WiFi Adapter
As promised the finished (pretty much finished) wireless script can be downloaded here the wireless_script is a diagnostic tool for wireless issues. It will return all relevant information to help diagnose a wireless connectivity problem, return connectivity stats and attempt to fix common problems such as blocks. It comes in cli - wireless_script_1.2.sh or gui - wireless_script_zenity_1.2.sh'
Let me know any issues you have with it. My contact details are in the readme.txt (also the wireless results.txt generated by running the script includes code tags for forums - so please copy and paste the whole document when pasting on forums to enable this function)
I've been trying to use the wireless adapter that came shipped with my computer for a while now (it is NOT a USB adapter; it seems built into the computer). However, I can't seem to get it working.HP says that the driver is Lite-On USB Wireless 802.11 b/g Adaptor. I am currently connecting to the internet with my netgear USB adapter (I think the driver is something like prism_usb)
I am new to linux. I just installed linux on my PC and wanted to configure wireless network connections. I have entered SSID and mode is set to infrastructure. I don't know what is BSSID do I need to enter MAC address (of router?)?I need to connect to internet wireless can you please guide me ?
I have a Air-CB21AG-A-k9 cisco Card and trying to run it with Ubuntu 11.04. But this card doesnt seems to be plug n play device with ubuntu 11.04. As soon I inserted the card both the leds are flickering but no wireless conectivity.
I'm running Lucid Alpha 1. Installed it about two weeks ago. Until a few days ago, the wireless networking was the best I've witnessed on any o.s. However, after last Wednesday's updates, connectivity now lags about 10-30 seconds whenever I open any web-page or access the repositories via aptitude. Granted after it gets going, it's fine. I noticed this same behavior in 9.10. I tested my XP connection and found no problems. .
I recently formatted an old Dell D600 and installed 9.10 on a single partition. It connects to my Airport just fine hardwired, but I have had no success getting the IntelPro/Wireless 2200BG card to talk wireless. I've entered the SSID and WPA2 security ID with no success.
I just installed Ubuntu 10.10. I was using iBall N 150M USB adapter for internet connection with Windows XP. Let me explain about the present Windows connection :
I am using an Outdoor CPE Wimax. For mobility purpose I have connected this wimax to one LAN port of ADSL+ WiFi router ( Beetel 450 TC1 ). This ADSL+wifi router reset to Factosy settings and enabled DHCP. With this setting , I am perfectly able to connect my laptop to Internet.
When I connect my USB adapter to Ubuntu , intially it detected the signal and asked for credentials. I gave the same and network established. But I am not able to browse the net. If I give [URL]..., its going to the ADSL+Wifi's diagnosis page. With Windows , [URL]... was going to the Wimax modem. After 2-3 trial and error , now Ubuntu also not able to connect to the wifi network.
Just recently I've been having strange connectivity problems with my wireless network. The connection has previously worked fine and haven't had any problems with it. I haven't installed anything that would have affect it as far as I know. how do I go about testing the network to see where the problem lies? I'm running Ubuntu 10.10 with a Netgear WG111v2 wireless adapter and my guess is it is some strange configuration problem or a rogue application is eating up packets because the system works fine when I boot it up into Windows.
When I try to ping my router I'll usually get something like 98% packet loss. However in the output below, the network sprang to life half way through my pings so it went up to 63%. What other tools can I try to find out what's going on?
Code:
alex@obsidian:~/dev $ ifconfig eth0 Link encap:Ethernet HWaddr 00:1a:4d:4e:03:3f UP BROADCAST MULTICAST MTU:1500 Metric:1
I have just upgraded to 10.04 and can't get wireless connectivity because the STA driver for bcm4312 fails to activate. Does this sound familiar to anyone? I had had similar problems in 9.10 and tried to install bcmwl-kernel-source which apparently caused errors in the upgrade process. Not sure if this is part of the problem.
I am looking to reinstall Ubuntu on my desktop computer, in a dual-boot configuration. The system I am installing to should prove no hassle, but my biggest concern is my wireless card. It's a D-Link DWA-510 wireless card. Checking the D-Link website, they do not seem to have Linux-specific drivers available for that model, so I am wondering if there are compatible drivers available in Ubuntu?
I have Redhat 5.5 and want to configure my TP-LINK TL-WN321G 54Mbps USB Wireless Lan card with it. when i plugged my TP-LINK TL-WN321G 54Mbps USB Wireless Lan card into my system my /sbin/lspci is
Where i should start configuring with? when i plugges this in my windows machine. it works fine
I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
I got ubuntu working fine on my netbook and wanted to play around with opensuse. I have it installed and everything works fine except my wireless connection. I have updated everything since the installation through a wired connection, that didn't help. I have read the stickies, but to be honest, I'm so new to this stuff I'm kinda lost. So my wireless network has a WEP encryption and I have entered that password as a 64 HEX Key in the Wireless Manager widget. It connects to the network and says is labeled as active, however there is still the yellow exclamation shield next to the connection. Firefox and other apps don't have access to the internet.
I have a Fedora Linux machine and a Windows XP machine and I want to enable TCP/IP connection between them using a cross-over cable. I have a type of middleware server running on the linux machine and I want to be able to run the client for the application on the windows machine and work that way. I have heard Samba as a solution but my understanding is SAMBA is mainly for file sharing.. and is not necessary for establishing TCP/IP connectivity. Is this a correct statement? How can I go about setting up TCP/IP connectivity between the two machines?
I've just installed Fedora 10 to basically work as a NAS for another machine - but also serve a couple of web pages. After having alot of issues with network manager (with it changing the subnet so nothing would work), I'm now almost there:
I have two network cards connected in the server: 1) eth0 connects to a switch that ultimately connects it to the net (on a 10.0.0.* network) 2) eth1 connects directly into another server for backups (192.168.0.* network).
Now when I setup eth0, I get network access can ping/ update/ surf the net - absolutely no problems, but when I connect eth1 in - the net dies and nothing works, I can ping devices on both the 10.0.* and 192.168.* networks, just nothing past the gateway. I presume this is either a route or DNS issue, but am unsure about where its falling foul - both the resolv.conf file looks fine as do the ifcfg-ethx scripts.
I just installed F14 on my thinkpad R61 notebook and I am not able to completely browse the web. By that I mean that I can connect and access and browse fedora.org (from firefox) and I can install software and updates but no general browsing. I can successfully ping [URL] in a terminal but I am blocked in a browser.
I tried both hardwired and wireless connections to my router, same issues with both and my desktop machine running F14 works just fine (hard line) on the same router.I also tried disabling the firewall and it does not change anything.
I'm new to Fedora 10 and still a newbie with Linux in general. I installed F10 on an old PC I had....and the install went well..however, I'm having Internet Connectivity issues.
Here is what I did so far: Did an ifconfig command and I have the following: pan0 Link encap: Ethernet HWaddr D2:30:36:AF:61:95 inet6 addr: fe80::d030:36ff:feaf:6195/64 Scope: Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes: 0 (0.0 b) Tx bytes: 8676 (8.4 KiB)
When I go to the Network Configuration Panel I see the following: Status: Device: Nickname: Type: Inactive pan0 pan0 Ethernet
Tried to activate and it states Activating network device pan0, please wait... determining IP information for pan0.... A few minutes pass by then. It indicates it failed. Cannot activate network device pan0! I have disabled the Controlled by NetworkManger and enabled the Activate device when computer starts.
On one of my F10 boxes yesterday, I installed several NM packages with yum update after being advised of their availability. Today, (the first reboot since installation) I no longer have network access on that box.
I just installed F15 on a laptop that previous had F12 working well. During install, it finds my wireless card and seems to set it up fine. The full install ran with the wireless active without any problem that I could see. Now, when I start up, I see Network Manager tells me that the wlan is active, but it doesn't show my specific network. If I click on the NM tray icon and open up the panel, my network is shown but it is not "active".
I can double click on it and it will become active - shows the little globe next to the antenna. This works fine for about 2 web pages worth and then FireFox 4 stops being able to find web pages. If I go back to the panel, double click on my wireless network (which looks like it is active already), and reactivate it, I can get the page I was looking for in FireFox, but within a couple of minutes it will stop.
Likewise with yum, while I'm installing software, I'll occasionally get errors like this: [URL]: [Errno 14] curl#6 - "Couldn't resolve host" If I reactivate my wireless network in the NM panel, it continues fine. Other computers/phones connected to this network seem to work fine. Is NM known to be problematic in F15?
I have an older Gateway with model number: 4024GZ, and I just installed Ubuntu on it and I am not able to connect to my home's wireless network. I am assuming that this is because of a driver issue, whether there is none or the old driver isn't compatible. So is there a website that I can go to to maybe find a driver that will work with both my wireless card and ubuntu? My wirless network adapter is internal and is a Broadcomm I believe. (btw I am a beginner here and if I have posted this in the wrong section,
My reinstalled OS Linux Lite ( version 1.0.9.E) connects fine with cable but Broadband BT hub does not support the protocol for wireless.Is there a Linux download which will solve this?
I just completed installing openSuse 11.1 I followed the detailed steps given in Getting Your Wireless to Work When I try to scan for available APs in the vicinity, I get the following error.
~> sudo /usr/sbin/iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
Can someone guide me in configuring my wireless connection. Also, since I do not happen to have a wired connection, I am alternating between openSuse and windows everytime i need internet.
i have to work at my home in my office. For that purpose i use a laptop with Windows (i really don't know why) XP. As i moved to Fedora 10 i want to make the same thing in Fedora.. Really don't know how. i have a cable connection and a router at my home ( i posted another message mentioning the fact of my wireless connection).
At my office i have a router , a firewall and 2 servers that i am allowed to use and i have to work on them (one is an AS/400 from IBM).
I've tried both the firewall interface that comes with Fedora and Firestarter, neither can configure as I want. So I think I'm going to have to do it by hand. In this laptop I have one 10/100 Nic and one wifi connection, at times either of them can be connected to the network. How can I configure IPtables so that any traffic is allowed out, nothing is allowed in (other than std stateful firewall replies), no icmp and that the fw logs any attempts to connect to the laptop?
