i am working with fedora 9 i need to turn on services such as telnet,ftp,dns,nfs,dhcp etc. but the problem is i dont even find xinetd based service when i am giving this command
Code:
#chkconfig --list|more
nd some command is not working for me as well like
[code]....
How can Vsftpd services & Xinetd.d services can be differentiated?
View 5 Replies View RelatedWhen I shut down or restart my computer, I can see there are some errors related to failed services (about xinetd, I think, which is NOT enable). But it scroll too fast and I cannot note them. Sorry for the "newbie" question: how can I see the log of what happened ? (dmesg only gives log about kernel, if I'm not wrong.)
View 5 Replies View RelatedWhen ever I have an issue with our LDAP server (which I was able to fix) we see the following errors in /var/log/messages and it causes problems with our services running on that box, e.g. httpd, nrpe, xinetd, etc. Aug 8 17:44:42 hostname httpd: nss_ldap: failed to bind to LDAP server ldap://serveraddress/: Can't contact LDAP server Aug 8 17:44:42 hostname httpd: nss_ldap: reconnecting to LDAP server (sleeping 64 seconds)... I am only wanting to authenticate SSH and Sudo and not services like httpd, nrpe, xinetd etc.
View 2 Replies View RelatedI can not find xinetd.conf on my server (CentOS 5.4 operation system).
View 2 Replies View RelatedI installed Subversion and xinetd and added Subversion as a service to xinetd.conf as instructed at http://www.codeandcoffee.com/2007/06...rver-on-linux/
I restarted the xinetd service using /sbin/service. however, Subversion does not end up being listed in /etc/xinetd.d nor does it seem to be running and occupying the port altogether.
I'd like to have an easy way to configure firewall, e.g. eable/disable what mythtv needs, or enable/disable what mediatomb needs. Basically open/close a few tcp and/or udp ports for all interfaces (I have two), or just one of them.
Is there a way to add my own trusted services for the firewall?
Other recommended ways to do that? Or just write a simple shell script?
How can i find web hosting services? I have my own site and want to web hosting for that.
View 2 Replies View RelatedI thought it was in the System>administration menu somewhere, but I just can't see it. What is it called, and where do I find it please?
View 9 Replies View Relatedhow can i find all services are installed or not in redhat linux.
View 1 Replies View RelatedI have a small stats program that I am using to get some sys stats. I am trying to launch this program on a particular port, using the xinetd system deamon. Here is what I am doing ...
[Code]///
I've been reading the RUTE Linux book and they recommend the use of xinetd to run services. However, this book is already a bit outdated, and I was wondering whether this still applies to today's circumstances?
View 4 Replies View RelatedSuppose I have a server, foo, that runs on port 5555. I can make one connection to it at a time on that port. I want xinetd to fork new instances of foo so multiple clients can connect to it.
Here's a configuration entry:
1) How does xinetd fork a new instance of foo when a previous instance is already listening on port 5555? Wouldn't the new process fail to launch because port 5555 is already in use by the previous process?
2) Suppose five clients connect simultaneously, and xinetd forks five instances of foo. When the clients disconnect, does xinetd leave all five instances running?
I read that xinetd listens on the service port and passes incoming traffic to the service (ftpd) via stdin. However, the ftpd source code reads its input from a socket not from stdin.
Am I to conclude that in order to be managed by xinetd, the source code for ftpd (or telnetd etc..) must be modified or recompiled to take its input from stdin??
I've recently setup a simple service application using xinetd, which runs a bash script to allow users to check for specific events into a log file. The contents of this logfile is not sensitive, so no need for SSL or password protection. Though, my concern about it is the possibility of a malicious request to cause execution of arbitrary code. I've seen similar bash issues discussed briefly a couple times, but never actually seen any solid point of how much of this is a fact, or myth. I've tested some obvious things, like sending tricky characters into the request, but so far it looks ok. So my question here is, considering the following code below, would be possible for an attacker to exploit it? How safe it is to have this sort of application running as a service?
# /etc/xinetd.conf
Code:
service logfile-search {
server= /home/guest/logfile-search.bash
socket_type= stream
wait= no
instances= 5
per_source= 1
user= guest
nice= 15
log_type= FILE /home/guest/logfile-search.bash.access.log
log_on_success= HOST DURATION EXIT
log_on_failure= HOST
}
# /etc/services
Code:
logfile-search30000/tcp
# /home/guest/logfile-search.bash
Code:
#!/bin/bash
trap "" 2 3 24
echo -n "Enter search string: " ; read -t 120
if [ "$REPLY" ]; then
echo "`date` - $REMOTE_HOST - $REPLY" >>/home/guest/logfile-search.bash.search.log
grep -i "$REPLY" /home/guest/logfile.txt
fi
exit
I would like some quick pointers to understanding service-daemon controlling and etc/initd.conf or /etc/xinetd.conf, if you prefer. read, a while back, I should be using...
[bash]# service "srv-dmon" start/stop/status/restart/reload/etc
and to stop using...
[bash]# /etc/init.d/"srv-dmon" start/stop/status/restart/panic/save/etc
[code]....
I am new to Linux i am installing cvs in it.
I am facing the below problem:sudo /etc/init.d/xinetd reload sudo: /etc/init.d/xinetd: command not found. /etc/init.d/xinetd restart /etc/init.d/xinetd stop.
I am trying to configure SNMP server using xinetd on red hat. I am using non-standard port for it. My connection to server fails. I see the following log messages in /var/log:
Jan 26 17:23:31 [userid] xinetd[15023]: START: my-snmp pid=15047 from=192.128.11.21
Jan 26 17:23:31 [userid] xinetd[15023]: EXIT: my-snmp status=1 pid=15047 duration=0(sec)
Jan 26 17:23:32 [userid] xinetd[15023]: START: my-snmp pid=15050 from=192.128.11.21
Jan 26 17:23:32 [userid] xinetd[15023]: EXIT: my-snmp status=1 pid=15050 duration=0(sec)
can anybody help to point out what is wrong in my config?
[Code]...
I recently installed Fedora 13 on VMware 7 environment without X window. sshd did work fine, but when I tried to put it into xinetd, it doesn't work any more. Here is what I have done so far :
I stopped sshd. #service sshd stop
and I configured xinetd.conf like below.
Quote:
#
# This is the master xinetd configuration file. Settings in the
# default section will be inherited by all service configurations
# unless explicitly overridden in the service configuration. See
# xinetd.conf in the man pages for a more detailed explanation of
# these attributes.
[Code]....
I don't know what I did wrong with them. I configured xinetd.conf, and I made service configuration file 'ssh' in /etc/xinetd.d, and I restarted xinetd.
What am I supposed to do to make a life on my sshd within xinetd ?
I have setup a vnc server using the "every imagineable server" thread which setups up VPN using xinetd. I have also installed Beesu and its associated scripts so I can easily open root privileged nautilus windows.
beesu works a treat on the actual display. However whilst vnc'd into the box I get prompted for my root password (which it accepts) but a nautilus window never opens. No errors, it just doesn't open.
So I want to get mount/umount option under right click services menu. I went to Dolphin -> Settings -> Configure Dolphin -> Services -> Download New Services and from there I installed KDE CDEmu Emulator and MountISO. But neither of them is showing up in actual context menu. Neither in Dolphin -> Settings -> Configure Dolphin -> Services for that matter. I tried to install them as normal user and as a root. I went to have a peak in /usr/share/kde4/services/ServiceMenus/ but they aren't there as well... It's just me or lots of things seems to be not quite working in 11.3?
View 9 Replies View RelatedUnable to start tftpd service after starting xinetd
View 9 Replies View RelatedI'm just trying to figure out what is going on with FC12
Here is the error:
[root@localhost bigmac]# rkhunter --check
Invalid XINETD_CONF_PATH configuration option - non-existent pathname specified: /etc/xinetd.conf
I can see this phenomenon on 2 different systems running 11.3 .In simple mode and also in expert mode.
View 9 Replies View RelatedI'm running xubuntu on two identical machines and both need to have file sharing working. the first installed no problem and works perfectly but the second machine will not work.
On the second machine i installed it with the install button when you click of shared folders. after it installed i rebooted and it asked me to install again. I tried to install again but it just kept coming up with the install windows afterwards. I tried purging samba and reinstalling and it did not work as well.
Im kind of lost on what to do now?
I have a RedHat linux server box connected to LinkSys router through ethernet port. I've assigned a static IP to the Linux box, which is out of range with router's DHCP range.
The Linux box has Apache, JBOSS, SVN and several other services installed, but none of these services are accessible through the WLAN. However, SSH and SFTP are accessible from WLAN.
Another interesting observation is that if I open a browser on the linux box (by exporting the DISPLAY to Exceed on my laptop on the WLAN) and point the browser's address bar to localhost:80 or localhost:9080, then I can access these services!!.. So, I suspect that something is wrong with accessing these services from a client on WLAN and I am looking for a solution for the same.
i would like to establish a VPN connection which can hold either 'two' hosts..and secondly if that's done i would like to go for more number of users..Can i do it using IPSec services??if yes then how?
View 9 Replies View RelatedXubuntu 9.10 on a DELL Inspiron 1150.I have a problem with intermittent dropping of my wireless connection ( see Belkin 7010 thread).Once dropped, the wireless will NOT reconnect (It just sits there saying "connecting" but never does) Same happens if I manually disconnect - I can never re-connect. On rebooting it will reconnect fine & all is well for sometimes 4 hrs.How can I kill all wireless services & restart them without having to reboot the laptop?
View 3 Replies View RelatedI installed Ubuntu 10.10 today Netbook Edition on the Asus Eee PC 1015PED. Specifications for Asus Eee PC 1015PED: Atom 455, 1.66 GHz, 1Gb ram, 250Gb drive, Bluetooth 3.0, 0.3 megapixel webcam, Gigabit Ethernet, WSVGA (1024x600), sound card compatible with the HD audio connector, d-dub, three USB 2.0 ports, 6-cell - lithium Ion - 4400mAh, WiFi 802.11 b/g/n.
solve the problem or an indication of the package to install. tutorial under the title, which services to disable to boost performance. first place to help you connect to the Internet. especially to the netbook'a - Asus Eee PC 1015PED. I updated everything on connection via cable. Detects the connection, but when it connects after a while.. "Wireless - Network Disconnected".
[Code]...
I am sharing some folders from my Ubuntu machine, using Netatalk and Avahi, over my network.I access these folders from my Mac using the AFP protocol.When all is well, my Ubuntu folders show up in Finder on the Mac and I can connect to them.But at random intervals, the Ubuntu folders will disappear. Sometimes they reappear a short while later.At other times, they wont appear until I go to my Ubuntu machine, and re-save (even if i don't change anything) the file:/etc/avahi/services/afpd.service.
View 3 Replies View Related