the latest kernel 2.6.40-4.fc15.x86_64 is somewhat buggy !It does not the include module for the USB Atheros chip 9170.As a result the TP-LINK TL-821N wireless N (very good) does not work !The previous kernel 2.6.38.8-35.fc15.x86_64 does include them as modules.grep AR9170 config-2.6.38.8-35.fc15.x86_64CONFIG_AR9170_USB=mCONFIG_AR9170_LEDS=yHopefully a version including those will be posted soon as an update.
View 14 RepliesI generally check what updates are being installed. This time sadly I didn't and again this kernel had one missing module. VirtualBox-OSE stopped working. It had been working fine with other upgrades. No it's not a problem with dkms or other stuff. This kernel doesn't have vboxdrv module like other kernels...i verified it...
[Code]...
The 2.6.38.8 version doesn't have vboxdrv module!....hence again I have to roll back to older kernel. So before blindly upgrading....read this message!
Epson R285, good as gold on FC14, and intially onFC15. Entering the cups admin tool, localhost:631, the printer is set up, the correct drivers are slected, paper size OK.
Cant get it to print a test page, its wants the password for CUPS and wont accept root, but root login can change all other params.
On the gnome printer applet , you can unlock it, add printer select local, and it goes away and finds the Epson R285, click on "add" it queries the printer and immediately drops back to the original printer applet. Without adding a printer. I haven't succeeded with network printing, the firewall is open on port 631, yet any attempt to find it from another computer fails. The gnome printer appet which interfaced with Gnome 2.x was nice, you could select everything needed. Not with this thing.
Whenever I update my kernel, I have to re-install the NVIDIA drivers, and this has always worked for me so far. I have the latest version of the Developer Drivers for Linux (270.41.19). After updating to the 2.6.40-4.fc15.x86_64 kernel, the nvidia installer fails with the error (/var/log/nvidia-installer.log):
Quote:
If you are using a Linux 2.6 kernel, please make sure you have configured kernel sources matching your kernel installed on your system. If you specified a separate output directory using either the "KBUILD_OUTPUT" or the "O" KBUILD parameter, make sure to specify this directory with the SYSOUT environment variable or with the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the kernel headers) were installed, you may need to specify their location with the SYSSRC environment variable or the equivalent nvidia-installer command line option.
ERROR:
The kernel sources are installed. Installation works properly in 2.6.38.8-32.fc15.x86_64
I tried installing the VBOX additions. But after running the VBoxLinuxAdditions.run file, building of the kernel modules failed. It gave following message: The headers of the currently running kernel were not found. If the current compilation fails then probably this could be the reason. The missing package can be probably installed with yum install kernel-devel-2.6.40.4-5.fc15.i686.
But when I tried installing the above kernel headers and devel package, it says no such package were found.kernel is 2.6.40.4-5.fc15.i686 but the kernel headers are not available for this version. They are available for previous versions i.e 2.6.40.3-0.fc15.i686.should I downgrade my kernel version (if it's possible) or is there any way things can work out. I have enabled 3D accelaration and given the memory of 128 MB for display. The memory for Virtual Box is 1 GB and hard Disk is 8 GB. The host system is windows 7.
I'm I seeing this wrong or is the initrd file in kernel-2.6.27.25-170.2.72.fc10.x86_64 a zero byte file and that's why I can't boot with it( get this "kernel panic not syncing VFS unable to mount root fs on known -block (0,0)" message)
View 2 Replies View RelatedI noticed that in Fedora 15 Beta when you choose a minimal install then add ONLY the defaults of the "GNOME Desktop" package, you will get this error: gnome-desktop3-3.0.1-2.fc15.x86_64 has a required package:
system-backgrounds-gnome
When I look for gnome-desktop3-3.0.1-2.fc15.x86_64 it is not on any installation menu list. I prefer gnome, but installed KDE and that worked. Any ideas of getting gnome to work?
The latest update changed the default boot from 0 to 1 and added extra parameters to the new kernel boot line.
default=1
timeout=8
splashimage=(hd0,7)/boot/grub/splash.xpm.gz
# hiddenmenu
title Fedora (2.6.31.6-145.fc12.x86_64)
root (hd0,7)
[Code]...
I have just updated my kernel and immediately struck trouble. The kernel update is marked as security update.
When booting I get a multiple warnings " deprecated config file /etc/modprobe...", then "no root device found" followed by "boot has failed, sleeping forever"!Clearly something is amiss with this update, so figured the best thing might be to remove it and wait on a fix, but attempting to remove the kernel via the package manager would cause a whole lot of other packages to be removed as well.Instead, I edited grub.conf, commenting out all the kernel-2.6.34.7-63 lines, so that the default is now the previous kernel (2.6.34.7-61).
I tried to update my f12 today. In the list it showed an update for kernel-2.6.31.6-145.fc12.x86_64 It all seemed to go OK but when I restated my computer it spit up an error and wouldn't boot"Could not load /lib/modules/2.6.31.6-145.f12.x86_64/modules.dep: No such file or directory"Luckily the old kernel still works.
I do have the disk encryption set, could this be related to that? Updated my laptop today with the xx.6-145.f12.PAE kernel and now it's borked to. Same problems.12/07/2009OK today's kernel update seemedto fix the problems and now all is well, execpt for my inkscape not working problem. But I put ubuntu 9.10 in a VBox and it works. So for now that's my work around.
I have an issue with kernel-2.6.31.9-174.fc12.x86_64. I ran the updates on Christmas Eve and it updated from kernel-2.6.31.6-166.fc12.x86_64 to kernel-2.6.31.9-174.fc12.x86_64. When I rebooted, I no longer received the Fedora Bubble boot screen. It comes up with the Fedora boot bar (across the bottom). Also, I receive failures during boot with the following:
[Code]...
I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:
[Code]...
In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
Keep trying update the packages (36 in total) and every time I keep getting this error
ERROR with rpm_check_debug vs depsolve:
kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64
kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64
Please report this error at [URL]
I just built some machines with the Intel 82574L gigabit ethernet chip, loaded Fedora 14, and discovered a problem with the e1000e driver dying after a few minutes. A little time spent perusing the web told me that the same driver had problems in Fedora 12 and Fedora 13 as well. Congrats to Fedora for the hat trick.As of kernel 2.6.35.10-74.fc14.x86_64, e1000e driver 1.0.2-k4 still had bugs.[URL]
View 6 Replies View RelatedSo I completely fail at making a kernel x86_64, used to make them fine for just x86 but I haven't a clue on how to make them specifically for 64-bit systems.
View 3 Replies View RelatedI suffered a kernel crash today - then noticed a newer kernel was available, so I updated to it.However, it's since crashed again! Here's the message - can anyone tell me what's going on, is this a known issue or is it bad hardware?
general protection fault: 0000 [1] SMP
last sysfs file: /devices/pci0000:00/0000:00:00.0/irq
CPU 2
[code]....
I am trouble trying to get vpnc to work on my laptop.
Using the same computer via Ubuntu, it works fine.
I used to use an older kernel with the cisco vpn client, but had to go through the motions of turning off cpus in order for it to work. I gave that trick a try and it does not work.
I pretty much followed the instructions from: Gentoo Linux Documentation -- Gentoo vpnc HOWTO
The machine completely locks up right after I enter my password...
I don't see anything relevant in the /var/log/messages file.
Is there another log file to look into specific to the vpnc?
i have lot of google search and make lot of suggestion found in google but without any solving for the problem. try to install vmware workstation any verion on my vps which have openvz and kernel 2.6.18-164.15.1.el5.028stab068.9-x86_64 when try to install for exampil vmware workstation 5.5.3 found this problem
root@server [~]# vmware-config.pl
Making sure services for VMware Workstation are stopped.
Stopping VMware services:
Virtual machine monitor [ OK ]
Configuring fallback GTK+ 2.4 libraries.
In which directory do you want to install the mime type icons?
[/usr/share/icons]
[Code]...
Recently installed FC15 XFCE on my new hard drive in my laptop, bring it home from work and it wont boot up.
Only changes I made at work were removing the standard package manager, replacing it with yumex, and slightly changing the panels to more suit how I like to work. Other than that just a little browsing the web on work's wireless connection.
Now it will not boot at all. Pressing Ctrl+Alt+2 and the last command I see is "Started SYSV: Late init script for live image.."
Tried booting into the original kernel (rather than the updated one from when I first installed) and the writing is smaller so I can see an earlier message where it failed a process. This is relating to akmod_nvidia but I installed that a couple of days ago and have restarted a few times since without problems before.
"Starting LSB: Builds and install new kmods from akmod package failed, see 'systemct1 status akmods'service' for more details"
I do not even get a command like where I can type with Ctrl+Alt+2 to try running anything.
I tried adding "runlevel=3" to the end of the kernel line in Grub. Is that the correct way to try and force into command line?
I have just upgraded my FC14 laptop to FC15 and although tsclient was 'transferred', it would not run and so I did not have a working graphical interface to make RDP connections.
As the app wasn't running, I removed it and then discovered that tsclient is listed as 'orphaned' and 'deprecated' in the repos, with the latest working version being for FC13.
Is there really no GUI interface for using RDP in Fedora 15 - I can't believe I have to drop down to a command prompt to run rdesktop!?
I'm going to remove Gnome3 from FC15 and, possibly, install KDE. I'm not sure about the options I have for it:I saw I can remove just the gnome-shell package. This makes me wonder if it is possible to replace the gnome-shell functionality with a gnome-2 equivalent, getting some of the gnome2 back how much of gnome-related packages can I remove? For example, is it advisable to remove gdm in favour of kdm? Are there gtk/gnome programs that are "better" than kde equivalents and are thus best left untouched, along with their dependencies? finally, somewhat unrelated, do you know good tutorials for gnome2.X expatriates to learn modern kde?
View 14 Replies View RelatedI recently installed FC15. When I try to execute a binary file, it shows permission denied message even when I login with the root user through "su -" command. It also give me the same message when I try to run a python script. How can I execute binaries in FC15?
View 1 Replies View Relatedwhere can i put the request for the [ FC15] build of:
alien [URL]
dependencies for po-debconf:
Code:
perl(Debconf::AutoSelect) is needed by po-debconf-1.0.16-5.fc15.noarch
perl(Debconf::Config) is needed by po-debconf-1.0.16-5.fc15.noarch
perl(Debconf::Db) is needed by po-debconf-1.0.16-5.fc15.noarch
perl(Debconf::Template::Transient) is needed by po-debconf-1.0.16-5.fc15.noarch
[Code].....
I currently have an FC15 KDE, set up as I like it as a media server, and with squeezeboxserver (for Logitechs media system) running fine. But I'd like to set it up as headless - and it presently needs to have a monitor attached. No keyboard or mouse and it will boot to the login screen (so not a BIOS issue). I need to get it to boot without needing a monitor or requiring a graphical log in. I can administer via SSH and Squeezebox server puts up a webpage. FC15 doesn't use inittab any more, so changing run levels is fraught. I don't want to play with targets without a safety line ...
View 4 Replies View RelatedI have been trying to compile a package and I am having some difficulties linking to libX11.so. It seems that it reports that XFree is undefined. Is there some work around for this?
View 4 Replies View Relatedi just installed fc15 on a virtual machine and since i wanted to learn how to configure it manually, i chose minimal installation. i have referring the deployment guide, now im trying to configure the network interface. what are the steps i have to follow when i install a new network interface manually? no GUI tools are available here because of the minimal installation. im stucked
View 2 Replies View RelatedI have used preupgrade to moved from fc14 to fc15. With fc14 I had my two usb 3.0 ports working. However, with fc15 my usb 3.0 ports are disabled. I have read the instruction at the common fc15 bugs doc and removed the kernel parameter xhci.enable=1 and also erased the file /etc/pm/config.d/xhci. Still the usb 3.0 ports are not working. I am using kernel 2.6.38.6-26.rc1.fc15.x86_64. I cannot use the 2.6.38.6-27.fc15.x86_64 since there no nvidia drivers for it.
View 5 Replies View RelatedHow to make plasma KDE activated in FC15 i have ZOTAC NVIDIA GE force 8400 GS graphics card. i have installed it as given in one of thread in this forum. But now how to make KDE windows transparent in FC 15.
View 1 Replies View RelatedI'm using FC15 and Xfce4 desktop, as gnome3 does not work well with my ATI 5770HD graphics card and the proprietary catalyst 11.4 driver.When I start gnome-terminal from xfce, there is some (animation?) and the gnome terminal appears normal size then shrinks horizontally.Is there a way to disable this re-sizing ?
View 4 Replies View Related