I made mpg123 rpm for x86_64 architecture but i'm not able to install it!I used the rpmbuild from RPM v. 4.6.0.i tried this
Code:
sudo yum localinstall mpg123-1.6.4-10.fc10.x86_64.rpm
and i got
[code]....
Today is my first day to use ubuntu for my C++ programming. However, when I was trying to install build-essential, it failed. This is the output shown:
vie@vie-laptop:~/TestC++$ sudo apt-get install build-essential
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package build-essential is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package build-essential has no installation candidate
vie@vie-laptop:~/TestC++$ .....
I tried to upgrade my Fedora 12 machine using preupgrade to Fedora 13.I went through the initials steps of preupgrade and rebooted when requested.A number of packages were installed until I encountered the following error and the installation quit.
Error Installing Package..A fatal error occurred when installing the tzdata package.This could indicate errors when reading the installation media. Installation cannot continue. Exit installer.Note that before I started the preupgrade processes I updated all packages I had installed in Fedora 12 including yum.
When I try to play a .mp3 file with mpg123, e.g. with this command: mpg123 someCoolTune.mpg I get these error messages.
[module.c:110] error: Failed to open module alsa: file not found
[module.c:110] error: Failed to open module oss: file not found
[module.c:110] error: Failed to open module esd: file not found
[module.c:110] error: Failed to open module jack: file not found
[module.c:110] error: Failed to open module pulse: file not found
[module.c:110] error: Failed to open module nas: file not found
[Code]...
GUI audio players like Rhythmbox and Totem work just fine. I believe all of the audio on my computer depends on alsa. Another command that works just fine is aplay, aplay -q /usr/lib/openoffice/basis3.1/share/gallery/sounds/cow.wav
and aplay definitely uses alsa. My only other clue is, when I shut the machine down, one of the messages printed to the console during shutdown was something about /etc/default/timidity. Timidity is something that converts MIDI to WAV, and it may have nothing to do with my mpg123 problem. I am running Debian Lenny. How can I troubleshoot mpg123? Or would it be likely to help if I simply uninstall and reinstall mpg123? That might be easier than troubleshooting.
I'm trying to get a package manager working on my new VPS.
I didn't set it up The machine is running Fedora Core 5, so I came here.
Quote:
First I tried:
Quote:
What am I not doing? Then I tried compiling an older version from a tarball:
Quote:
Unfortunately when I entered "make" I got:
Quote:
So I googled and apparently I'm missing gettext too? So I downloaded that...
Quote:
Which is confusing as I thought I installed GCC a while back. Edit: Guess not.
Quote:
I have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
I am running Fedora 13 in VMWare. I tried doing a software update and I get this error message when tring to install the updated kernel:
Test Transaction Errors: installing package kernel-PAE-2.6.33.6-147.fc13.i686 needs 6MB on the /boot filesystem
how to increase the memory space required for installation.
I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)
View 2 Replies View RelatedThere is something wrong with the nvidia driver installation, but i dont know what is it exactly or how to fix it, when i try to install anything i get this errorinstallArchives() failed: Selecting previously deselected package gnomeradio. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading
View 2 Replies View RelatedI am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies View RelatedI'm logged in as root and want to run Add/Remove Software (Package Installer) but get the message telling me
Code:
Running graphical applications as a privileged user should be avoided for security reasons. Package management applications are security sensitive and therefore this application will now close.
How must I install applications? Surely the world is getting paranoid with all this hackers and viruses, because with every new version O/S, the security features gets more and more; up to the point that you can't fricken do and play around with your pc as you would.
I am trying to install kcachegrind and during the ./configure phase I got the following error:
Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following:
./configure --with-qt-includes=/usr/lib64/qt4/include
but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
So what should I do... for you info I am listing below the output of:
yum list *-devel | grep -i qt
qt-devel.x86_64 1:4.5.3-9.fc10 @updates
qwtplot3d-qt4-devel.x86_64 0.2.7-6.fc9 @fedora
PackageKit-qt-devel.i386 0.3.16-1.fc10 updates
PackageKit-qt-devel.x86_64 0.3.16-1.fc10 updates
PyQt-devel.i386 3.18.1-5.fc10 updates
PyQt-devel.x86_64 3.18.1-5.fc10 updates
PyQt4-devel.i386 4.6.2-3.fc10 updates
PyQt4-devel.x86_64 4.6.2-3.fc10 updates
QtRuby-devel.i386 4.3.3-4.fc10 updates
QtRuby-devel.x86_64 4.3.3-4.fc10 updates
SoQt-devel.i386 1.4.1-9.fc9 fedora
SoQt-devel.x86_64 1.4.1-9.fc9 fedora
avahi-qt3-devel.i386 0.6.22-12.fc10 updates
avahi-qt3-devel.x86_64 0.6.22-12.fc10 updates
avahi-qt4-devel.i386 0.6.22-12.fc10 updates
avahi-qt4-devel.x86_64 0.6.22-12.fc10 updates
dbus-qt-devel.i386 0.70-4.fc9 fedora
dbus-qt-devel.x86_64 0.70-4.fc9 fedora
dbus-qt3-devel.i386 0.9-1.fc10 fedora
dbus-qt3-devel.x86_64 0.9-1.fc10 fedora
libprojectM-qt-devel.i386 1.2.0-3.fc10 updates
libprojectM-qt-devel.x86_64 1.2.0-3.fc10 updates
php-qt-devel.i386 4.3.3-4.fc10 updates
php-qt-devel.x86_64 4.3.3-4.fc10 updates
polkit-qt-devel.i386 0.9.2-1.fc10 updates
polkit-qt-devel.x86_64 0.9.2-1.fc10 updates
poppler-qt-devel.i386 0.8.7-7.fc10 updates
poppler-qt-devel.x86_64 0.8.7-7.fc10 updates
poppler-qt4-devel.i386 0.8.7-7.fc10 updates
poppler-qt4-devel.x86_64 0.8.7-7.fc10 updates
qt-devel.i386 1:4.5.3-9.fc10 updates
qt-qsa-devel.i386 1.1.5-5.fc9 fedora
qt-qsa-devel.x86_64 1.1.5-5.fc9 fedora
qt3-devel.i386 3.3.8b-17.fc10 fedora
qt3-devel.x86_64 3.3.8b-17.fc10 fedora
qwtplot3d-qt4-devel.i386 0.2.7-6.fc9 fedora
zbar-qt-devel.i386 0.8-5.fc10 updates
zbar-qt-devel.x86_64 0.8-5.fc10 updates
Code:
Retrieving package faad2-2.7-1.pm.1.2.x86_64 (2/2), 37.0 KiB (82.0 KiB unpacked)
Retrieving: faad2-2.7-1.pm.1.2.x86_64.rpm [done (16.6 KiB/s)]
[code]....
I currently using Ubuntu 10.04 LTS.Whenever I try installing any new package(*.deb) it will display red error message that I don't understand.What happen? and how to solve this problem?
View 8 Replies View RelatedToday I tried to install the Tex system on my notebook butI encountered an error during installing texlive-base package
Code:
The following NEW packages will be installed:
texlive-base
[code]....
installing on linux i try to install VLC and get [user@localhost ~]$ sudo yum install vlc Setting up Install Process Parsing package install arguments Resolving Dependencies
--> Running transaction check
---> Package vlc.i386 0:0.8.7-0.8.fc8 set to be updated
--> Processing Dependency: vlc-core = 0.8.7-0.8.fc8 for package: vlc
[Code]...
I did the "yum update" today, the process was doing well but, the follow error appears:
Transaction Check Error:
installing package kernel-PAEdebug-2.6.31.12-174.2.3.fc12.i686 needs 9MB on the /boot filesystem
Look:
Code:
Transaction Summary
==================================
Install 10 Package(s)
Upgrade 33 Package(s)
Remove 1 Package(s)
[code]....
i tried running (yum update, also yum install vlc) and i get these error
Code:
Error: Package: abrt-1.0.7-1.fc12.i686 (updates-testing)
Requires: librpm.so.0
Removing: rpm-libs-4.7.1-6.fc12.i686 (@anaconda-InstallationRepo-200911081854.i386)
[code]....
i'm a newbie to Fedora 12. While d/l the updates and installing I got this error. Where do I start?PS...I'm weening myself off MS so be gentle.
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
[code]....
While installing fedora 14 from DVD, during the installing process started half way, the error message appear on the screen " The file ed-1.4-2.fc14.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. " I have download the fedora 14 iso twice the same problem i got while installing. I install fedora 10 or 11 it install successfully.
View 7 Replies View RelatedCode:
(with --nodeps --force) Error: Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
[code]...
i'm trying to install a plugin witch will let me watch movies in .wmv format. I can't seem to find it. also, i would like to get a converter that will allow to change the format of the video from .wmv to .divx.
View 1 Replies View RelatedTrying to launch Second Life gives the following error message:
You are running the Second Life Viewer on a x86_64 platform. The most common problems when launching the Viewer (particularly 'bin/do-not-directly-run-secondlife-bin: not found' and 'error while loading shared libraries') may be solved by installing your Linux
This problem was easily found using search with solutions for Fedora 11.
The following information has been found for adding the 32 bit support to Fedora 11 but it does not work in Fedora 12.
The file created in the instructions below is a list of the 32 bit libraries. It is then called as input to yum to simply install them.
"Add the Libraries Next, add the 32-bit libraries by copying the following list, and pasting it into a text file. Save it as �Fedora-ia32.txt�."
Another post says that was all unnecessary as the following commands would do the same thing.
Could have simply been achieved by calling:$ yum install SDL.i586...(Or by selecting SDL.i586 in add/remove programs.)
The problem I have with Fedora 12 are neither of these will install anything in Fedora 12. Looking at add/remove programs does not yield anthing that looks like it is 32 bit support when searching with the argument "SDL".
Does anyone know how to install 32 bit support into Fedora 12 64 bit version ? I like the simple yum expression rather than long lists like the first example uses, but I'll try anything if it works.
A side question to this entire experiment is what chance would you give to Second Life being able to be run remotely using VNC? I would think if it runes on the Linux machine, using a remote terminal would have little impact. Using VNC isn't the usual way this will be run, I just wonder if it would work at all.
When i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
It seems to me that I've got a dual package somewhere.
Quote:
Transaction Check Error:
file /usr/lib/libakonadi-kabc.so.4 from install of kdepimlibs-4.2.0-1.fc10.i386 conflicts with file from package kdepim-libs-6:4.1.4-1.fc10.i386
file /usr/share/config/plasmoids.knsrc from install of kdelibs-6:4.2.0-10.fc10.i386 conflicts with file from package kdebase-workspace-4.1.4-1.fc10.i386
file /usr/share/kde4/servicetypes/plasma-animator.desktop from install of kdelibs-6:4.2.0-10.fc10.i386 conflicts with file from package kdebase-workspace-4.1.4-1.fc10.i386
[Code]....
i accidentally pulled the power while an upgrade was going on. I felt bad, so went to do "yum-complete-transaction" only it was going to remove my entire system. Bad idea. So, instead, I tried to do yum update on my own. Well, it says that i need a package (glib2-some version-already-installed) to upgrade the glib2-devel package. The problem is that the version needed is already installed. I tried getting yum to reinstall it, but that didn't fix anything. Mainly because it says that is installed and not available. So the final error is "no package matched to install." I know that this probably looks weird and disjointed, so I am happy to provide info to try and get this fixed.
View 6 Replies View RelatedWhen I use YUM to install ICAClient it ends with the following message "Package ICAClient-11.100-1.i386.rpm is not signed" (see the code below). However, when using browser (Nautilus) to start installation of the same ICAClient-11.100-1.i386.rpm it completes with success (see the image below).
This happens when installing with YUM from the CLI:
Code:
[root@nc6000 boris]# yum install /mnt/temp/DAT/software/linux/INSTALL/ICA/ICAClient-11.100-1.i386.rpm
Loaded plugins: downloadonly, fastestmirror, presto, refresh-packagekit, remove-with-leaves, security, show-leaves, verify
Loading mirror speeds from cached hostfile
[Code]....
I prefer using CLI when installing packages. Which options can be use to sign a package during installation with YUM?
I just installed Fedora9 in my desktop. The installation was successful and it was doing security update and system update right after install. After all the update service finished, I do a manual update to see what happy (Sysem>Administration>Update System). It keeps coming up with Package Error with the message "failed to get a TID: Incorrect path with ';' returned!".
View 8 Replies View RelatedPackage Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?