Ubuntu :: Monitor Out Of Range Noob Dual Boot Pita?

Jul 6, 2011

I just installed ubuntu in a dual boot with Windows 7, I have a new emachines pc compact with 3gb ram 2.8 amd processor, and nvidia 6150 integrated. I cannot see the boot menu, so now I cannot go back into windows anymore becaue I am receiving the message "monitor out of range change to 1600x900" so it just automatically boots into ubuntu. I have searched alot on this topic, and have tried giving terminal commands specified for thiis issue, but the termnal does not recognize the commands. I am logging in and am typing "sudo" before I go into configutration. I am BRAND NEW to linux and am really struggling with this.

my monitor is a 4 month old HP 2010
Display size
50.8 cm (20")
Display type
Wide Thin Film Transistor Liquid Crystal Display active matrix
Aspect ratio

[Code]...

View 2 Replies


ADVERTISEMENT

Debian Multimedia :: Always Get A "Monitor Frequency Out Of Range" Error Whenever Boot?

Mar 6, 2010

I certainly do not consider myself a Debian power-user, but I do presently have 3 Lenny systems and 1 Squeeze system running fine in my home on "older" hardware. However, for the past week I have been trying to get yet another system running, and I have hit the wall. This is on a new home-built system with an AMD Athlon II X4 and an ASUS M4A785-M motherboard. The Lenny installation was done with a net install of the AMD64 variety.

I always get a "Monitor frequency out of range" error whenever I boot. I can do a CTRL ALT F1 to get to command line, but I have no success getting to GUI. I have read numerous posts of similar monitor frequency problems with various distros, and most point toward HorizSync, VertRefresh, etc settings in xorg.conf. I have played with a myriad of options there, but I still get the "frequency out of range" error after a reboot. I have swapped monitors to no avail (monitors that work on my other Debian 32-bit systems). I really don't think the problem can be the xorg.conf file, since I have tried the exact same file as on the other machines. (Also, those systems seem to be more than happy without custom HorizSync and VertRefresh options in their xorg.conf files.)

On this new computer, I am using the motherboard's integrated video output (theoretically a ATI Radeon HD5200).I don't know if special options are needed in xorg.conf for this???I am able to successfully boot to GUI with multiple differentCD Linux distros; however, no such luck with the Debian installation. I would prefer to stay with Debian if possible, but I cannot live by command line alone on this system.Please let me know if there is something else that I should try before punting and moving to another 64-bit distro.

View 8 Replies View Related

Slackware :: Boot Into Dual Monitor Setup ?

Jun 15, 2011

I created a dual monitor setup in Slack 13.37 using the KDE systemsettings -> Monitor Setup function. (Sadly I had to rebuild ~/.kde in the process, but that's a different story.)

I verify that ~/.kde/share/config/krandrrc contains the new monitor setup (both screens active). I have saved a startup session with krandrtray running. However, when I logon, the system always starts with both screens in clone mode. I always have to go into systemsettings or krandrtay and redo the dual monitor configuration.

Is there a better way? Do I have to create a suitable xorg.conf (which I will try when I get home) or is there another way to boot into the dual config automatically?

View 4 Replies View Related

Ubuntu Installation :: Dual Boot With Windows 7 - Blank Screen With My TFT Screen Displaying A Msg "Out Of Range"

Jul 8, 2011

I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"

Then suddenly Ubuntu loads without showing any option to load windows 7.

View 2 Replies View Related

Ubuntu :: Monitor Frequency Out Of Range - 10.04

Oct 16, 2010

I've recently reinstalled a computer with 10.04 for my parents to use, and it worked fine at mine, but after transporting it to theirs and hooking it up to their existing monitor it doesn't seem to work anymore!Well, it boots and I hear it login but I don't get a splash screen and at some point between the bios and the login sound it comes up with Frequency out of Range. On the warning message it displays a frequency of "72.9 kHz / 90.2 Hz" but in the monitor settings its reporting that its operating at horizontal 64,0 kHz and vertical 60.0 Hz. I also don't get any splash screen when starting up, just a flashing _ before the monitor stops things

What I can do however is drop into a the tty console (alt+ctrl+1) and login to the shell but don't really know what things to change from there.Having googled things a bit I've found references to xorg.conf but there's no such thing on my system so I can't edit that to fix this. Likewise I also have found references to fiddling with grub to get into the recovery, but grub doesn't even appear when I boot and I don't know what to press to get it to drop into its menu...

This is really urgent as I need to go home tomorrow at the latest and I want to get my parents system working before then. I also have no spare monitors here and I didn't think to bring with me a liveCD to fiddle with things (only a UNR netbook which I'm posting this from), so the console is the only access I have to the machine.Some specs: Ubuntu 10.04. ATi Radeon 9100 IGP, no proprietary drivers are installed. The monitor is an old CRT that still works beautifully and whose replacement is not an option.

View 3 Replies View Related

Ubuntu :: Monitor 'out Of Range' With Black Screen Msg

Mar 6, 2010

i tried to install linux mint, at first i got 'out of range' with black screen msg but used compability mode and got past it and installed mint on my HD. a moment after it updated my nvidia drivers and after reboot I got the out of range message again, which leaves me in the situation where i cant do pretty much anything I tried editing xorg.conf added VertRefresh 60-75 and Modes "1440x900_75.00"

View 4 Replies View Related

Ubuntu :: Monitor Input Signal Out Of Range / Fix It?

Nov 28, 2010

I basically destroyed my laptop a couple of years ago. Windows XP wouldn't even start but it didn't come with an installation disk. I tried recovering it but it just died. So a few months ago I put a box of thing on top of it which broke the screen! I was going to chuck it out until I stumbled upon a page which told you you could use it as a web server.

I decided to use it to host my website. I installed ubuntu without a problem however it wasn't until I was about to start it up I found out it was against BT's terms and conditions!! So since I installed ubuntu I thought I might as well make use of it and use it to render my files. When I went to turn it on for the second time and plugged it into the monitor it said input signal out of range!

I can see the login screen but I can't move the mouse or anything. I can't access the terminal, how can fix this?

View 9 Replies View Related

Ubuntu Servers :: 11.04 - Out Of Range Error On Monitor

May 7, 2011

I just installed Ubuntu server on one of my computers, but when I boot up the screen goes blank and the monitor gives me an 'Out of Range' error. I understand that this means that the resolution settings are too large for the monitor, but I don't understand how to change them, since there is no GUI installed. Details:

Monitor:

LCD
Recommended Resolution is 1280x1024

I have also tried it on another monitor with a recommended resolution of 1920x1080, This also gave me an OOR error. Ubuntu Server version 11.04

View 6 Replies View Related

Debian :: Starts Up Out Of Range From Monitor?

Jul 2, 2010

i just did a graphic install of debian lenny and when i finished the installation and restarted the computer the grub boot menu appeared and i selected debian and nothing happened the monitor just displayed a message saying "out of range" i have a dell studio xps 1800is it my graphics card (it shouldn't be) how do i start x server in a different resolution (if screen resolution is the problem

View 9 Replies View Related

Hardware :: Monitor States Out Of Range?

Aug 4, 2010

I have recently got the Linux bible 2010 and it came with a cd and dvd containing multiple distro's of linux. I have tried them all with the same problem. Everything until the actual GUI desktop shows up from the live disks as well as an actual debian install, when I get to the desktop however out of range shows up. I have a video card hooked up, figured that might be the problem, it was not. I tried the on-board video and it also did the same thing. I also tried a different monitor, which did not work.

View 3 Replies View Related

Hardware :: Out Of Range Error On Monitor

Oct 4, 2010

I am a Windows Server guy trying to stay afloat on this Linux installation I am doing so please bear with me. I have installed RHEL 5 and installed the updated NVIDIA 256.53 certified driver. Upon rebooting everything was great. I got to the X server login and entered my user name and password. The very next thing I see is "Out of Range" error on my monitor. I know that I needed to verify that my xorg.conf file had the proper refresh rates specified in it for my monitor, which I have done.

View 3 Replies View Related

General :: Monitor Resoluti8on - All Out Of Range

Mar 28, 2010

the electric went off and when it come back on my monitor picture was all out of range. I changed the resolution to bring the picture back in and now the words are almost unreadable.

View 1 Replies View Related

Ubuntu Multimedia :: Warsow: Monitor Says 'Out Of Range' On Start?

Mar 15, 2010

I am on ubuntu 9.04. I have nVidia 8500GT and I installed Warsow 0.5 today.When I start the game my monitor goes black with a message "Out Of Range"I can only hear the music.I tried hitting a few keys here and there and I could also hear the tutorial start.

View 1 Replies View Related

Ubuntu Installation :: Updated To 10.04 And Now Monitor Frequency Is Out Of Range

May 1, 2010

I just updated my Wubi install of 9.10 to 10.04 last night. Everything went well until it required me to reboot the computer. I rebooted, loaded Ubuntu from the startup list, and then the screen went blank and I got "H.V. frequency over range" on the monitor.

I can load the GRUB options, but recovery mode using the most recent kernel does not work. I am entirely unexperienced with using the terminal and command prompt options.

Here's what I have attempted so far:

$ sudo dpkg-reconfigure xserver-xorg this did not do anything, the command was not recognized

$sudo nano xorg.config I don't even know what to do when I get to this screen

and I am about to try $ sudo displayconfig-gtk

I have an ATI Radeon 9100 IGP card

View 7 Replies View Related

Ubuntu :: Error Resolution Out Of Range On Computer Monitor

Oct 14, 2010

I have an hp vs17e monitor and I am running slax linux But I have absolutely no idea how to fix the error resolution out of range on my computer monitor.it then shuts off and I can turn it back on and it'll do the same thing.

View 1 Replies View Related

Ubuntu Installation :: Can Not Run Live Cd Monitor Input Out Of Range?

Nov 7, 2010

this has happened with a few different attempts of ubuntu based distros lately ... i try to boot a live cd it gets to where it starts loading and the monitor pops off and says input out of range ... im aware that this is a known bug with xorg choosing either the wrong resolution or refresh rate ... but what the heck are we supposed to do , i can't get far enough into the boot process that i can open a terminal and try to bypass xorg ... so will all future distributions of ubuntu just be out of the question for me ? if you ask me what needs to be done is make the installer ASK what resolution you want to attempt to boot at .... similar to what puppy does

View 2 Replies View Related

Debian Installation :: Monitor Out Of Sync Range?

Jan 18, 2010

My last Linux install was SUSE 6 on an early ISA based Pentium clone. I'm used to Unix / bash from OS X, MinGW, QNX & BeOS... none of these rely heavily on X. But I'm thinking that Linux is so popular, I'm doing a lot of my Windows stuff under MinGW, why not just stick Linux on and be done with it.So I've polled the various distros, I'm a power-user / dev so Ubuntu doesn't seem like me, and I'm not familiar enough with Linux to go Gentoo just yet, but the way I slim Windows and OS X installs down to just what I need. I love apt-get and like FreeBSD installs I've seen, but want some Linux kernel goodness for my self, so I have chosen Debian.

I grabbed the amd64 build of lenny DVD 1, partitioned up and installed a bare system that I can apt-get the bits I want later.Here's the problem... When the install completes rebooting sends the graphical login to a frequency my old Hanns-G TFT can't handle.I can Ctrl-Alt-F1 back to the terminal or boot in single user mode, and everything seems to be good until you go GUI.Here's what I've tried.

I've renamed /etc/X11/xorg.conf to /etc/X11/xorg.conf.oldI ran dpkg-reconfigure xserver-xorgI've reinstalled using both simple GUI and Expert GUI using both kernelsI've tried adding nvidia-* packages with apt-get and aptitudeI remember there used to be a frequency tuner app for SUSE 6 and XFree86, but it seems that sort of thing is depreciated in modern Linux.Info? My GFX card is an nvidia GT 220, the motherboard is an ASUS P5QL Pro, the Monitor (Hanns-G) is attached via RGB HD-15 D-Sub (sadly that's all I have access to right now) and it's native resolution is 1280x1024 4:3 @ 60Hz, but in heXPee it will sync at that resolution at 60, 70, 72 or 75Hz, though it does get fuzzy at 75Hz.I'm fairly certain that X is working, just not at a frequency my screen can display... how can I fix this from single user, or regular bash terminal?

---edit--- Forgot to mention I ran dpkg-reconfigure on the XServer. :s It didn't offer video drivers, only to change from gb 105 keyboard layout and ps/2 mouse. I set the META key to the logo key while I was there, but it wasn't really helpful in any other way.

View 14 Replies View Related

Hardware :: ATI Driver Install / Monitor Out-of-range

Jun 15, 2009

I have tried installing the ATi drivers via the 1-click install process, however when I get to init 3 and try to run sax2 (sax2 -r -m 0=fglrx) my monitor just goes out of range. I have tried this in both OpenSuSE 11.1 and 11.0 - both the same. I have tried running sax2 with the -l switch for low resolution - no change. I have also tried the switch "--vesa 0:800x600@60" and "--vesa 0:1024x768@60" which are known resolutions/requencies that this monitor supports (the latter is the native resolution) - no change.

I have tried another monitor but it's exactly the same. My video card is an ATi Radeon HD2600AGP and is correctly identified by OpenSuSE, and displays video fine using the default driver.

View 17 Replies View Related

Ubuntu Installation :: Clean Install Of Karmic - Monitor Out Of Range?

Jan 30, 2010

I've just installed Karmic and get an Out Of Range message on my monitor when starting.I had to use the alternate install in order to get Karmic on there in the first place.I have an Nvidia GeForce 7600 GS, and a BenQ FP767-12 TFT.

Output of lspci;01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a2)Not sure how to get my xorg.conf as I can only get to a shell. Here are (what I think are) the important bits;

Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "screen0" 0 0
EndSection
Section "Module"

[Code]...

View 1 Replies View Related

Ubuntu Installation :: 2ond Monitor Does Not Detect - Shows Out Or Range

Feb 15, 2011

My brother got a new 120hz monitor, but can only get the old one to work. If he boots up with both of them connected in windows xp they work fine, but in Ubuntu 10 only the old one works. If he tries to detect the monitor in Display Preferences, nothing happens. The old monitor is connected to vga output (lcd with vga only) the new monitor is connected to dvi with a dual-link dvi cable. We know the graphics cards cannot provide 120hz, for now we run the monitor at 60hz until he upgrades the rest of the pc (sandy bridge i guess).The 120hz monitor worked fine until he changed graphics card from a ATI radeon 9200 to a geforce 3 ti 500.

He has tried

sudo dpkg-reconfigure xserver-xorg

and detect monitor in Display Preferences but no dice. Could he try restricted drivers?

System specs:

Ubuntu 10.04 32bit
athlon xp 1700mhz
1GB ram
ati radeon 9200
geforce 3 ti 500
lg w2363d

View 1 Replies View Related

Ubuntu Multimedia :: Fglrx Driver For ATI Card Pushes Monitor Out Of Range?

Feb 21, 2010

fglrx driver for ATI card pushes monitor out of range

I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600

Heres my issue:

When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.

Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.

My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.

View 9 Replies View Related

Ubuntu :: Change Default Monitor When Dual Monitor Is Enabled

Nov 19, 2010

I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.

View 1 Replies View Related

Ubuntu :: Compiz - Dual Monitor Wallpaper On Single Monitor ?

Dec 10, 2010

Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.

View 2 Replies View Related

Debian Installation :: Monitor Signals Out Of Range On Reboot

Mar 15, 2010

I am running an AMD Athlon 64 with an NVIDIA 6600 video built into the motherboard (PC Chips). My monitor is a 19" LCD with a standard VGA connector. I tried installing Lenny and everything went smoothly. However, when I rebooted, the monitor said "Signal out of range." I had this happen with a live CD of another distro too.

View 1 Replies View Related

Fedora Installation :: Cannot Install Core 10 Monitor Out Of Range?

Jan 15, 2009

I cannot install Fedora core 10. It boots up and it gets to the Fedora 10 loading screen. After that it complains my monitor is out of Range and that's as far as I can go. I had originally thought I could get to some text install mode, but I don't make it far enough to do that.

View 1 Replies View Related

Fedora Installation :: Monitor Setting Caused Out Of Range

May 12, 2009

I think the settings in /etc/X11/xconf.org are wrong. I do know what the settings should be and have SSH access, (root plus password). Being new to linux I cannot figure out how to save the file after editing. I have been using: vi /etc/X11/xconfig.org to get to the file, but haven't been able to save the file.

the edit and save commands I need, I hate to do an entire install since this is about my 6th install.

View 2 Replies View Related

Hardware :: Dual Monitor - 2nd Monitor Not Coming Up - Xorg.conf Missing Something?

Oct 19, 2009

This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.

Is my xorg.conf missing some vital line(s) or setting?

My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.

I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?

lspci:

Code:

Code:

View 3 Replies View Related

OpenSUSE Hardware :: Nvidia 19.29-22.1 Suse 11.3 Dual Monitor Mouse Flickers When Moved To 2nd Monitor?

Jan 15, 2011

just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010

[code].....

View 9 Replies View Related

Software :: Option For Encoding Wmv3/VC1 (PITA)?

Jan 12, 2010

I'm trying to get my kids' DVD's backed up and converted for use on their little video players. The players as best I can tell will only play movies encoded in wmv3 (I think essentially the same as VC1?). ffmpeg apparently isn't capable of encoding to either format and mencode seems to have the same issue. Does anyone know of a Linux option for encoding into this PITA format?

View 7 Replies View Related

Fedora :: F14 Dual Monitor - Firefox Starts On Wrong Monitor

Jan 27, 2011

I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor

When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.

About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved