Fedora Installation :: How Big Should My Partitions Be
Jun 29, 2009
I going to dual boot Fedora 11 and Windows Vista (although Windows Vista is currently defunct) and have wrested about 120 GB from Vista and can't get any more. (This is an old computer, but when I tried to fix Vista by going in to make rescue and recovery discs, it did me the additional service of deleting my Linux partitions). I think I want the partition structure:
Correct me if I'm wrong. How big should the home and boot partitions be, and should I have a /home partition at all if I am going to be putting my personal data on the shared partition instead? I have 3GB RAM which I think means a 2GB swap is good.
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
I am happily running Fedora 8 on my Inspiron 6400 Laptop. I am looking to upgrade to Fedora 11 soon, and had a partitioning question.
Currently my disk looks like this:
My question has to do with using LVM's in Fedora... What are the benefits of LVM vs just regular partitions (even though in F11 they are ext4 ) ? Does it make mounting the drives from a live CD or backing up partitions more difficult? I use PartImage to backup the entire partition... with this work with LVM?
I'm trying to install Fedora 13 on the HDD of a notebook, currently used by Windows XP. I have several partitions used but have also about 18 GB of free space.If i try the "use free space" option to install Fedora i immediately get an error:
Quote:
Could not allocate requested partitions:
not enough free space on disk
So I have to create the partitions manually. My disk partitioning is that you can see in the image:For first i try to create a /boot partition (ext3, 250 MB). This operation is completed successfully. But from here any operation i try to create other partitions returns an error like the previous ("...not enough free space on disks")I have over 17 GB of free space, as you can see.Maybe my disk partitioning is somehow strange and the partitioning tool can't handle it properly.
ive bought a new laptop, dell studio 17, and now ive wanted to install fedora 14 (64 bit), but after a few minutes the first problem appeard. Ive wanted to add the partitions and it always tells me that it "Could not allocate requested partitions: not enough free space on disks."
the funny thing is this, that my hard disk has got 500GB memory space and 150GB is full
EDIT: Win7 is running at the hard disk... could this be the problem?^^
I got an old pc (pentium pro) with a harddisk of 150 Giga. I want to install several Linux distro's on it, to compare them. I was thinking on Fedora, Centos, Ubuntu, Debian, Gentoo, Slackware, OpenSuse, . Who can give me some advice how many partitions to create ? (what size and what filesystem) Can I share partitions between different distro's ? (to reduce the number of partitions to create).
Due to a combination of factors, if installing from the Live CD, you must have at least two partitions available. One will be a small (around 200 MB) /boot partition. The / (root filesystem) partition must be formatted as ext4 while the /boot partition must be formatted as ext2 or ext3.
The normal installation CD set and DVDs don't have this issue.
If you choose to install the Live CD and don't follow this scheme (you can, of course, have additional partitions besides /boot and /), the LiveCD won't install.
I'm trying to install 11 on my desktop from the live CD. I already have XP and Ubuntu installed, and I know for certain that I have an additional 25 GB left with my documents partition included. I am using a ~= 1 week old hard drive, so that last 25 GB is raw and unformatted.Anyway, here's what's going on: When I attempt to create a new partition in the "free space," I get an error dialog saying "Could not allocate requested partitions: not enough free space on disks."I thought maybe it was a quirk with the ext3/ext4 dilemma, maybe I had to create /boot prior to /, but I tried it both ways.
I decided to upgrade an old box I use as a server at home. I had been running F8, but after it's end of life and numerous patches since then it was getting a little shaky. I downloaded the KDE Live CD (picked that arbitrarily really since I don't run X on this box - just didn't want to do the whole install over the net) and off I go.
So I booted the CD and added "liveinst" as a boot loader option to kick off the install without starting X and KDE. Just as Anaconda was starting, I got the message "there is not enough memory for a graphical install" and the text based installer starts up. Kinda strange, I thought, since this box had the "recommended" amount of ram mentioned in the F12 release notes. Oh well, so their docs are wrong - wouldn't be the first time and anyway I'm used to doing text based installs from way back.
But this one wasn't like any I'd seen before. After the welcome screen there were only 4 questions - keyboard type, language, timezone, and disk options. Also, at various stages odd characters similar to the Russian alphabet started popping up in various areas on the screen. When it got to the disk options there were 3 - use entire drive, replace existing linux install, and use free space. I picked the 2nd one and moved on. The next screen said my choice was about to be written to disk blah blah blah - but gave me no option to specifiy which partitions to use or how to use them. I should mention here that this box had 3 partitions on it - 1 for swap, 1 for root, and 1 for var...........
I'm at the point where I don't know how to assign certain things for the partitions. When I was on windows I took out 25gbs out of my primary hard drive for Fedora. I also have a 200mb partition. I know I need to put the 200mb partition as the /boot but what do I put as the 25 gb one? I'm using the create custom layout.
I just installed Fedora 10 on my machine that have windows xp already installed on it. I chose "Remove all partitions on selected drive." by mistake. Is there a way to get back windows xp?
I have windows 7 and ubuntu on my computer they were working fine together, so i decided to get fedora. now when i go to the boot menu on fedora it has a list that says fedora (numbers), and other. so i clicked on "other" but it says partitions were not found.
I resized all of my partitions using GParted, I got Windows 7 and Vista to boot up again ok but I can't get F11 to boot. I am not using GRUB nor do I want to, I tried using the install disks and doing a repair and "chroot"-ed my filesystem and everything is still there, there is just something small missing that I am not remembering to do. I have the NST files on my Windows drives and it tries to boot but F11 complains that there is no boot disk. I'll try to boot once again and write down the exact error message.
I'm trying since days to set up my netbook with Fedora and FreeBSD dual-boot and leave some space for a third OS. Most guides suggest to install first FreeBSD and then Linux, that attempt ended up in a disaster (BIOS hangs with the FreeBSD formatted HD connected; disconnect it => boot from USB => reconnect HD => format HD solved that). So I tried the other way around but the installer doesn't like my partitioning all to much.
[Code]...
after the installation sda2 is 300.000MB (the 50G unused were added to /home). Furthermore cfdisk can't open sda anymore (FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder). at my last try the installer canceled due to an error from python. But apparently after it wrote the partition table, cfdisk could display the HD partitions without error and it even was correct! "replace existing Linux systems" didn't work after that either - the partition manager suggested the usual partitioning (using the whole disk), however, "using free space" was able to display the real partition and after repartitioning (suggestion was to keep the old partitions on sda1 and 2 and create the new system in
Code: rest (~50.000MB) unused ) I could for the first time install the system on the partitions i actually told it to. Unfortunately this doesn't mean the problem is solved for me because I (I did not censor that!! =>) ****ed my HD again with the next try to install FreeBSD (same scenario as mentioned above, but that's a story for the FreeBSD forum) so I'll run into the same issue after I restored my HD (unless i can reproduce the exception).
My laptop has 80GB HDD Space, and sometime ago I installed fedora 13 inside windows with 15 gb space for it. Now, I have removed windows and the disk space is recovered. So the disk space is split up like this. 15GB for Linux + 42GB + 21 GB. I just want to know whether I can extend this 15gb so that the full of 80GB can be used without having to mount it. Or in other words can I remove the partition and make it into one single drive.
I'm stuck trying to install f13 on my trusty old eeepc 701 4g. It has a 4GB SSD and 32GB of usb flash memory. The plan is to replicate how I had f9 installed: / and /boot on the ssd with /usr/share and some /home/<user> data directories on the usb flash. I had a hacked f9 kernel that supported persistent usb, allowing me to suspend to ram with this arrangement. It looks like that's now built into the stock kernel. he problem I have is that the Live CD image (I've tried the stock Fedora and the XFCE spin) can't deal with installing to ext2 (only 3 and 4) and the boot.iso image flatly ignores the "lowres" and resolution=800x480" options. I can work my way through the first few screens blind, but can't deal with repartitioning.I'm sure this is a Standard Problem, but I haven't hot on the magic google search to find it all afternoon
I have F14 live on a USB stick and the PC boots fine from this.Now I want to install to the HDD but I need to get a handle on the existing partitions.I don't need too much space for linux, can I delete the 3rd and 4th partitions (D drive and EFI partition) and add my linux partition in this space?Investigation so far suggests that the EFI partition is not used and the D drive is empty.
I'm trying to dual boot F14 along side of Win7 and I'm running into partitioning errors - "Could not allocate requested partitions: not enough free space on disks" I used the Win7 Disk Management to shrink the C: drive by 100G, and the Disk Utility in F14 shows the unallocated space. Here is what the current layout looks like:
--210Mb bootable (sda1) --168Gb (sda2) --Win7 --105Gb unallocated -- Future home to F14 --31Gb extended (sda 3) -- not sure what this is used for --31Gb (sda 5) -- Lenovo drivers --16Gb (sda 4) -- Lenovo restore
Am I running into the partition limit I have been reading about? If so, is there a way to get around this? I really don't want to delete the partitions yet.
i already make a copy of all my data and i already download the live cd of fedora 15
here is my computer specifications of my netbook
AMD SEMPRON SI-42 2.10 GHZ 2,00 GB OF RAM 32 BIT SYSTEM ATI RADEON HD 3200 GRAPHICS 232 GBS OF FREE SPACE DVD-RW
this pc works good in Fedora 15 ? I do not know how much space to allocate for the partitions to be created, and I do not know which partitions must be created. I need a very good performance, my computer is able to give it to me with Fedora 15?
I installed Fedora 11 on a server with 2 equal sized disks. I used the gui installer and didn't make custom setting changes to the partitions. One of the steps asked for me to choose the disks i wanted to use for this installation. I selected both disks and after the installation Fedora only sees one volume the size of both disks combined.Do I now have software raid0 or do I have something else?
I'm trying to install from the Live CD. I read the sticky about needing a /boot and a / partition. I think that sticky applies to me but I'm not sure; once the Live CD loads, I click the "Install to Hard Drive" icon on the desktop. It thinks for awhile but ultimately doesn't display anything.What I'm not sure about is how exactly I go about making those partitions. My current HD is a Ubuntu system (Karmic Koala), and its network slowness has prompted me to try FC12. I've backed up everything already, I don't need to preserve anything on the existing drive.
I'm looking for the easiest way to get FC12 installed. Should I fool with the partitions? I just download a different install CD i.e. a non-Live one? If so, which one? Do I need all 5 or so CD images? I don't have a DVD burner so downloading the DVD isn't an option. I'm comfortable working from a Linux command line once the system is working, but I don't have much experience "close to the metal" i.e. actually getting a system up and running.
Two nights ago I installed the KDE Spin of F15 and it all went smoothly. Then, I decided to try and use Windows' bootloader (it was a dual-boot) instead of GRUB. So I booted into Windows, spun up EasyBCD, added the correct entry for Fedora, and overwrote the MBR. I rebooted and tried to boot into Fedora, only to realize that the Windows Boot Manager had a failsafe that sensed when it didn't boot into Windows, and it stopped me from booting into Fedora.
At first, I booted into my live USB and tried to get GRUB back. After a couple Konsoles full of GRUB telling me that it couldn't mount the drive and install itself, I decided I was probably doing something wrong and it would be much easier to just reinstall Fedora.
I deleted the Fedora partitions I had made earlier from Windows (because it was already running). Then I booted into my live USB and tried to install Fedora. I clicked "OK" to make a partition (that would mount at /boot) that was 500 mb. It told me there wasn't enough space, but sitting right next to one of the already installed partitions was more than 190000 mb of space. So I tried to redo the partition with 250 mb, then I tried to make the swap partition and the main one (that would mount at /). I kept getting the error. I decided maybe it was a problem with the USB, so I rebooted into Windows and reinstalled the ISO onto the USB (with unetbootin) and repeated the process, only to get the same error.
P.S- I tried to use the option to "Use Free Space" as well as doing it manually and got the same error. Also, I saw another thread where a person with my same type of compute (a Lenovo Y560) had a similar problem. It might be possible there's a hidden partition for Lenovo's purposes? Anyways, the other user's solution was to move the an extended partition somewhere. I'll be posting an fdisk soon, in case I have the same problem as the other user. The other user used GParted, but it looks like I can use Easeus too, which I already have installed.
P.P.S- Here's the fdisk in case it will help:
Code: Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes
Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:
50MB for Dell Diagnostics **GB main vista partition 10GB recovery partition 2.5GB MediaDirect partition
I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.
Installation fails with PartitionException: Can't have overlapping partitions I am trying to install Fedora in my Laptop as a dual boot. I tried to create partitions like root ext4 then /home & /var lvm and swap but after applying write changes to disk I am getting PartitionException: Can't have overlapping partitions. So I tried several times just normal partitions etc. but didnt work. I found this on net
when i install fedora 11 after windows 7 ,i can not partition and takes errors,it is of primary partitions that is about 77GB that windows 7 had installed on it ,but when i install ubuntu ,it can be installled without any error ,when i asked for this one said me that ubuntu has grub installer that reference to another where for primary partition ,
I am trying to install Fedora 12 x64 on my 27" iMac 10,1. I have tried both the installation dvd and the gnome live cd (both x64 i did not try the x86). On the installation dvd I get as far as the menu giving me the boot/install options - I have tried to install both with a basic video driver and the regular install/upgrade option - both times it begins loading components for the installer program (/sbin/loader) etc. After it loads sbin/loader and mounts the partitions it freezes with half the screen being the terminal txt beforehand and the other half being just a standard fedora logo w/blue background. It is not much different when I try the live-cd the only different is it does the exact same thing when the timer for automatic login is done. Any possible command line arguments that I could use to stop the graphical corruption?
I've been running Fedora Core 3 on a P4 450 as a personal Samba server and domain controller. It's worked so well that I never gave any thought to upgrading. The other night, I noticed that Up To Date wasn't working, and that Firefox was acting strangely. I made the FC 13 installation disks, whereupon I found out that the system didn't have enough memory.
Rather than mess with the P3 450 any more, instead I swapped main boards and decided to do an upgrade. it even possible to do an "upgrade" from 3 to 13? Is it possible to maintain my existing partitions/settings. I've backed up everything that I'd be too unhappy to lose. It's a two drive system and the second is nothing but data, none of it catastrophic to lose, but at least disappointing. I'd like to keep the data and settings on the primary disk, but won't cry if I can't.
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
