Fedora Installation :: F10 Setup Loads Image - Stuck On Blinking Underscore
Mar 6, 2009
I completed my dvd-burn for Fedora 10. I booted up from the dvd, and the automatic 10 second installation text shows up. The setup loads the images, and proceeds to a loading bar. After the loading bar I saw an underscore. That all I see.. I wait a couple of minutes and I still only see an underscore. This is my first time trying to install a Unix type O.S. Are there any commands I need to run for the installation to move forward? Or is there some type of corruption in the installation?
View 4 Replies
ADVERTISEMENT
Jun 2, 2011
I have downloaded the latest iso from the Fedora site (15 32-bit). I am using a netbook and so I have used the tool suggested on the site to copy the iso to my usb drive. Before this I formatted it to fat32 in Windows and then used the tool. When I rebooted with my USB drive, all that shows is a blinking _. I tried repeating the process again but the same happened.
View 1 Replies
View Related
Feb 14, 2010
So, to start of this is about a fedora 12 x86_64 installation from DVD media downloaded via torrent and verified by checksums and dvd verification tool
hardware is:athlon x4 620
4GB 2channel ddr3 1600mhz ram
1x 250gd sata2 hdd
asrock mobo with amd 785 chipset (radeon HD4200 128mb onborad mem + 512mb from ram) + raid controller (1,0,10,raid ready,jbod)
First of this is my first linux installation and even though I have read the installation instructions and documentation thoroughly, I can't exlude the possibility tha I messed up (BIIIIG). So, what happened in my
case:
installed fedora 12 from dvd on a raid ready sata disk.I should point out that trying to install with the default selection (selection 1 on dvd boot menu) resulted in a system crash/freeze, with the monitor displaying white/pink and green/black stripes, so I did the installation with the basic display driver instead (option 2 in the dvd's boot menu)during installation I left most things on default. Especialy grub I didn't even touch. It said that it would setup grub on the disk's MBR which sounded ok to me.Things I did change were:Partition Layout, 300MB boot on 1st primary partition, 32GB root on 2nd, 16GB swap on 3rd, /home and /tmp on Logical Volume (partition 4) wich is the rest of the disks space about 200GB Installed packages (added web development packages as well as java , eclipse etc.)
installation completed without showing any errors so the system rebooted.once booted from the disk (hdd) the installation was done in, the system would just freeze on a black screen with a blinking underscore. this freeze happened before grub showed any signs of existence
So after I checked and rechecked the consistency of the error and rummaged around the internet for info I thought that it would be wise to try and boot the installed system using some other procedure. (I should point out that at this point that I redid the Fedora installation a couple of times trying different setups but apparently nothing helped)So I tried the "Boot from local drive" option, which resulted in starting up the system with no errors.Leaving the, I assume, grub settup problems for later (I have no internet on that computer yet) I started looking around and familiarizing myself with the new environment and realized that the monitor driver was working only up to 1280x800 and since my monitor is a full HD TFT panel I went to find instructions on how to instal the ati display driver.finding these: gofedora.com/how-to-install-ati-catalyst-fglrx-98-drivers-fedora-11/I downloaded the .run file copied it from laptop to desktop via flash drive and started the above listed procedure I only got to step 5 (blacklisting) since when I tried to save the file the system said something about having to be root user So I logged out to try to login as root but something went wrong during logout because all colors went funny and high contrast and kind of blurry (text was quite difficult to read) and after I hit (panicked out of my mind) a few buttons I got a fullscreen console with the messages:Bridge firewalling registered virbr0: starting userspace STP failed, starting kernel STP I cand remember if I could type or issue any commands at that point but apparently I rebooted the system (again via the insallation media)Grub starts the boot sequence, fedora loading bar appears, only to issue the message:"lo: Disabled Privacy Extensions" At this point I can write to the machine but nothing happens and i can move around the mouse with a huge white rectangle for a cursor(for selecting stuff i guess)
View 14 Replies
View Related
Aug 26, 2015
After an aptitude safe-update my laptop doesn't boot any more.
I recorded the following video of the boot process: [URL] ....
The disk is fine (I ran fsck), GRUB in OK. Could it be X?
I can boot in safe-mode and also have internet connection, so not everything is lost ...
View 10 Replies
View Related
May 14, 2011
My parents just upgraded from their 8+ year old desktop to a newer dell. The old one has XP on it and would barely run, lots of bloatware, viruses, etc.. I tried putting an ubuntu 10.10 disc to boot from it but the old desktop suddenly stopped recognizing mouse and keyboard input so I couldn't change the boot preferences. I took the hard drive out and plugged it into my desktop, copied all the useful files to my hard drive, then wiped it. I then installed ubuntu on the old -and now empty- hard drive by having it plugged into my computer.
I put the hard drive back in the old desktop and found that the keyboard now works. I can press F2 or F12 and change things around and whatnot. However, when I let it pass the screen that prompts me to press F2 or F12, it goes to a screen with a blinking underscore in the top left of the screen and gets stuck there.
what's causing it to get stuck on this screen?
View 5 Replies
View Related
Aug 29, 2010
I have been using Unix / Linux for quite some time now. But there is still one thing that annoys me. When I disable the GUI interface I get a blinking under-tow (see-below)
_
And I have no idea what button is used to get the computers attention / login.
View 4 Replies
View Related
Jul 10, 2010
Alright I installed Ubuntu fine, everything was working great. And I was able to shut down and startup the system once or twice. But now all of a sudden, when I power up, the screen stays at the DOS terminal with the blinking underscore at the top line. It never changes, won't load, etc. What in the world happened?
View 1 Replies
View Related
Oct 31, 2013
I installed Debian 7.2.0 (amd64) on a Toshiba Satellite C870D-121 with the graphic installer. It already has Windows 8.1 installed on another partition, and for Debian I'm not using the same partition of course. Actually, the Debian installation is replacing a Ubuntu 13.10 installation that was working fine.
After choosing Debian in the Grub menu, I can see the boot log entries adding and then the screen clears and all I get is a blinking cursor. After a while, some '^@^@^@' symbols appears. Of course I can Ctrl-Alt-F1 to get a virtual Terminal in order to login and try to investigate the problem, but so far I haven't been able to reliably identify the problem.
View 5 Replies
View Related
Oct 30, 2009
I ran into a problem the moment i installed 11.1. The GUI wouldn't show up (ctrl+alt+f2 yeilded a black screen with a blinking underscore). Failsafe worked fine, though.
So, i tried entering, one by one, every parameter that was entered in the failsafe boot options. Entering 'x11failsafe' gave me a flawless GUI. So, i opened the '/boot/grub/menu.lst' file and added this parameter in the 'showopts' of the normal mode, to make it permanent. Fine. Now, what exactly have i done?
Note- I use an NVidia 8000 series Graphic card. I'll post more details if you need them.
View 4 Replies
View Related
Apr 28, 2011
it has said "about 6 minutes remaining" for over an hour now at"installing upgrades", more specifically at "configuring gnome-power-manager"
touchpad and keyboard unresponsive ,should I worry? or just wait? also, the capslock indicator LED is blinking
computer is an HP Pavilion dv6500 from either 2007 or 2008 (don't remember)has an AMD Turion 64 x2 processor, but was always used as a 32 bit...and an nVidia N-Force Graphics card of unknown number.
View 5 Replies
View Related
Jun 21, 2011
I have currently installed the ubuntu 11.04 natty narwhal edition through the wubi installer alongside windows 7. I wanted to just check out what the kde environment had to offer differently from the default desktop environment which is gnome unity environment.
I installed the kde environment using some sudo command given by google. After using kde environment for a few hours, I just began to feel, I liked the default gnome environment better (in classic mode) as compared to kde as I was more used to the former.
So I uninstalled kde with another sudo command which I got by googling. At the final step of the uninstallation, I admit I am not sure whether what I did was right or wrong. There was sth related to 'daemon' that popped up eventually and I chose yes for that and kde was uninstalled successfully or atleast that's what I thought.
But to my horror, when i tried rebooting my laptop to ubuntu gnome, the blue coloured kubuntu logo was popping once again and I had to go back to the synaptic package manager and delete sth called the 'plymouth' package to remove the kubuntu logo.
Now after doing all these, when I tried booting ubuntu, I was not able to get to the gnome login screen. The screen was just stuck with the ubuntu logo and the process bar blinking and gnome never started.
When I pressed the Esc key to check out what was happening from behind, I could see that some processes were being checked and there was a [ok] after everything and there was a [FAIL] next to "starting CPU interrupts balancing daemon". And the terminal screen ended with "stopping system V run level compatibility". I am not sure if this might be the root cause of blocking the boot-up. But I couldn't get a screenshot of those intermittent terminal screens as I was not in a position to type in any commands such as fbgrab which can be used to grab a screenshot of the terminal screen.
Eventually after intense googling, I figured how to manually configure gnome to start up. I pressed the Cnt + Alt +F1 as soon as the white ubuntu logo popped up and after logging in into my ubuntu account through the terminal interface, I typed in the following things:
And then voila I got the gnome login screen. I temporarily heaved a sigh of relief. (by the way I saw something flash quickly on the terminal moments before it went to the gnome login screen like "you need not init this way or sth"..I just couldn't catch sight of it properly as it flashed only for a few moments)
But I am not satisfied. Obviously there might be a way to set this problem right isn't it? Kindly someone pls throw some light on this issue. I want gdm to be automatically activated during boot. Its a big pain to manually configure it everytime I boot. Is it possible to do a windows restore to set the ubuntu right? But I saw in some forums mention that something called the boot.ini will botch up if we perform a system restore in win 7.
Method that does not involve uninstalling ubuntu and reinstalling it. This is because I have done a lot of tweaks, optimisations and installed lot of apps in it. I do not have a system image backup as well. So it will be a nightmare to do all these things over and over again. The mistake or rather the drawback from my side is I just have my laptop alone and do not have another standalone desktop to experiment with linux.
View 1 Replies
View Related
Jun 23, 2011
I have currently installed the ubuntu 11.04 natty narwhal edition through the wubi installer alongside windows 7. I wanted to just check out what the kde environment had to offer differently from the default desktop environment which is gnome unity environment.
I installed the kde environment using some sudo command given by google. After using kde environment for a few hours, I just began to feel, I liked the default gnome environment better (in classic mode) as compared to kde as I was more used to the former.
So I uninstalled kde with another sudo command which I got by googling. At the final step of the uninstallation, I admit I am not sure whether what I did was right or wrong. There was sth related to 'daemon' that popped up eventually and I chose yes for that and kde was uninstalled successfully or atleast that's what I thought.
But to my horror, when i tried rebooting my laptop to ubuntu gnome, the blue coloured kubuntu logo was popping once again and I had to go back to the synaptic package manager and delete sth called the 'plymouth' package to remove the kubuntu logo.
Now after doing all these, when I tried booting ubuntu, I was not able to get to the gnome login screen. The screen was just stuck with the ubuntu logo and the process bar blinking and gnome never started.
When I pressed the Esc key to check out what was happening from behind, I could see that some processes were being checked and there was a [ok] after everything and there was a [FAIL] next to "starting CPU interrupts balancing daemon". And the terminal screen ended with "stopping system V run level compatibility". I am not sure if this might be the root cause of blocking the boot-up. But I couldn't get a screenshot of those intermittent terminal screens as I was not in a position to type in any commands such as fbgrab which can be used to grab a screenshot of the terminal screen.
Eventually after intense googling, I figured how to manually configure gnome to start up. I pressed the Cnt + Alt +F1 as soon as the white ubuntu logo popped up and after logging in into my ubuntu account through the terminal interface, I typed in the following things:
And then voila I got the gnome login screen. I temporarily heaved a sigh of relief. (by the way I saw something flash quickly on the terminal moments before it went to the gnome login screen like "you need not init this way or sth"..I just couldn't catch sight of it properly as it flashed only for a few moments)
But I am not satisfied. Obviously there might be a way to set this problem right isn't it? Kindly someone pls throw some light on this issue. I want gdm to be automatically activated during boot. Its a big pain to manually configure it everytime I boot. Is it possible to do a windows restore to set the ubuntu right? But I saw in some forums mention that something called the boot.ini will botch up if we perform a system restore in win 7.
Method that does not involve uninstalling ubuntu and reinstalling it. This is because I have done a lot of tweaks, optimisations and installed lot of apps in it. I do not have a system image backup as well. So it will be a nightmare to do all these things over and over again. The mistake or rather the drawback from my side is I just have my laptop alone and do not have another standalone desktop to experiment with linux.
View 9 Replies
View Related
Jan 24, 2010
i am sort of newbie to linux,i recently installed opensuse 11.2. i also installed nvidia card via 1 click install..
after install compositing didnt work,it said "someother program is blocking it ,type alt ctrl f12 to enable" after i hit that,my screen was stuck at blinking cursor,
so rebooted went to init 3, typed sax2 ,it showed me the options ,it passed the test screen,but after reboot didnt work.rebooted and hit sax2 -r -m 0=nvidia,again showed me option ,but didnt work.
everytime i login i see nvidia logo flashing up,but after login compostiting is still not enabled ,i have no idea what is wrong help please..
my other option is to type nvidia-xconfig to
my config,
nvidia 6150 card,opensuse 11.2 32 bit,amd turion,
my xorg.conf
Code:
# /.../
# SaX generated X11 config file
# Created on: 2010-01-24T16:06:50+0530.
#
# Version: 8.1
code....
View 9 Replies
View Related
Apr 30, 2010
HP Pavillion m9340f.
View 2 Replies
View Related
Apr 26, 2011
In Ubuntu 11.04, grub skips directly to booting Ubuntu. I can't choose which kernel image it loads. Why is that and how can I fix that?
View 1 Replies
View Related
Jan 21, 2010
After fixing network issue (change to vanilla kernel) and configuring alsa sound drivers, I realise that I may be spending some time doing some more config before putting my machine to hardcore use!
So, is it possible or can anyone recommend a program that can do an image of the hdd which I can save on an external drive and install/reinstall it on hard drive if i ever need to?
View 1 Replies
View Related
Jul 29, 2009
i try to setup sun virtual box but it show there are no bootable image found.
How to attach my XP to this VM ?
View 12 Replies
View Related
Jun 18, 2009
I installed F11 without issue but after rebooting all i got is a blinking cursor with no error messages or indeed any other form of feedback.
To check i was even getting as far as grub i went into rescue mode from the dvd and edited the grub.conf to remove the hiddenmenu option and set the timeout to something a little larger. This confirmed that grub does in fact seem to be loading fine. Selecting the Fedora entry still however leave me with just a blinking cursor.
Next i tried removing quiet from the boot commandline. same result.
Just in case i had the wrong disks configured in grub i tried swapping root(hd0,0) with every combination available with as expected various errors about either partition not being suitable or files not found.
Using grub to boot manually to a usb disk worked fine so grub does seem to work.
With no feedback at all i tried all the common options people suggest just in case the kernel is booting but not getting far enough to output to the screen. So far i tried noapic acpi=off nomodeset.
I tried installing 3 times so far with slightly different configurations just in case but still no luck.
Basic partition layout in case it helps:
/dev/sda <-- boot loader installed here.
/dev/sda1 /boot ext3 2GB
/dev/sda2 swap 4GB
/dev/sda3 / ext4 634GB
Various other disks are present but not part of the configuration. I double checked they are not mentioned anywhere in the common places like fstab.
View 5 Replies
View Related
Nov 23, 2009
I used the F12 DVD to upgrade my system, before all the NVIDIA warnings were posted. I have a Geforce 7100 (7 series) card and used the rpmfusion drivers on Fedora 11. After the upgrade, I get a blinking cursor at boot time. What I should do to repair the mess.
View 5 Replies
View Related
May 1, 2010
I had a dual boot working fine with XP and F12 on two physical drives, all was well. Last night my friend helped upgrade my system, I now have 3 drives (20gig F12) (60gig XP) and (320gig Win7) now the PC only loads Win7 as I think my friend told bios to boot from 320gig. Has anybody here got experience with triple boot from 3 drives? Here is my guess, tell bios to boot from other drive and add Win7 to grub. Not sure how but that's my guess. Also what worries me is that win7 does not "see" the other two drives.
View 5 Replies
View Related
Aug 28, 2011
I am having trouble booting the install CD for Fedora 15? As soon as I select a boot option I get a grey screen with a blinking cursor even if I pick the option to use basic video. I have tried using the intel_iommu=off parameter which makes no difference.
I also seem to have a similar issue when trying to install Ubuntu 11.04 on this machine too. I am using a Athlon x2 5200+, 5GB Ram, ATI 3850 if that's.
View 1 Replies
View Related
Jan 14, 2009
I'm trying to install Fedora 10 on my samsung HDTV with my PC hooked up via DVI-HDMI. All the text screens look fine, but when it loads the graphic installer, the video gets corrupted, but i have a mouse, but a few seconds later it freezes and hangs, and I can't do anything. Nothing loads. This happens with the livecd's as well.
View 3 Replies
View Related
Jun 29, 2011
I have just installed Fedora 15. I have tried both the desktop edition and the LXDE Spin on an AMD X2 64 5800+. It's hard-drive so I select "Use All Space", meaning all the partitions will be removed and recreated. The installation completes normally, when I reboot without the CD, I get the screen with blinking cursor same as [URL]... Adding intel_iommu=off to the grub.conf did not help. I presume the default installer works correctly however the installed boot configuration puzzles me. The boot partition is /dev/sda1 and the mount point is /boot. If boot from the cd after the installation, I mount:
[code]...
Is this how it should be? This is me being new to Linux probably, but I should /boot contain the boot information if that's where the boot partition is mounted? Is there any way to "turn on debugging" so I can get a better insight on what's not happening?
View 2 Replies
View Related
Jun 5, 2011
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies
View Related
Feb 22, 2010
so I installed fedora 12 last night, everything was fine. Installed some things, moved music over, etc. (Dual booting with windows vista btw) So I install my graphics card driver, (ATI Radeon HD 3200) and I reboot. When I open the bootloader (I think thats what it is), It starts to boot, then just has a black screen with the flashing underscore. I can type and stuff but nothing happens.
View 6 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Mar 12, 2010
I've just installed ubuntu 9.10 from a live cd on to a 2nd HDD, with vista on the 1st. When I turn my PC on GRUB comes up and I can select ubuntu or vista, vista works but when I try to boot ubuntu the screen goes black with a small flashing underscore in the top left and then just goes completely black, nothing else happens after this. I've tried reinstalling from the live cd but when I go install nothing happens and the screen goes black again. When I was installing I changed the boot to something like scsi?
My PC's specs are:
Dell inspiron 531
HDD1: Ubuntu(300GB)
HDD2: Vista(1TB)
OS
Windows vista
Graphics card.
ATI radeon HD 4700 series
CPU
AMD Athleon 64 x2 6000+
Mainboard
Manufacturer : Dell
Model: 0RY206
BIOS: dell 1.0.13
View 3 Replies
View Related
Nov 3, 2010
I installed 10.10 of the live boot CD. It said everything went fine, now when I go to boot into Linux it just flashes the underscore on a black screen. What do I do from here?
View 1 Replies
View Related
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Aug 6, 2009
I did the yum preupgrade install, all went well, did preupgrade -gui ; did everything fine, then i got the REBOOT now to start updating, clicked and i have just
View 5 Replies
View Related
