Fedora :: How To Start Wireless Networks
Jan 22, 2011My wireless networks is disabled.How can I start it ? OS:fedora 14I can use it in vista.
View 3 RepliesMy wireless networks is disabled.How can I start it ? OS:fedora 14I can use it in vista.
View 3 RepliesI installed fedora 12 for the first time last night, and I have been having a lot of trouble with my wireless. It is a Dell 1395 WLAN mini. I followed the instructions from [UR], but I still can't see any networks. Moreover, when I boot into windows I can no longer detect any wireless networks.
View 6 Replies View Relatedabit new to fedora 9, the installation went ok but now i cannot get access to my network.what happens is that i can click on the wireless icon on the desktop but then i'm not allow to click on my network. there is an edit function available but not sure how to use it.
View 1 Replies View RelatedI want to add a user that can connect to wireless networks, use all the video and audio stuff etcetera.
i know to use the User and Group management application for that. but how do i enable their use of the wifi, video and audio stuff please?
I accidentally clicked on a wireless network once and now every time I boot up, it tries to connect to that network and asks for the password. I have to keep pressing cancel and then it connects to my regular network.
I tried fiddling around with the network settings but I couldn't see any place where I could remove that network from the 'List of preferred networks' or at least try to prevent it from connecting automatically.
How to remove this network from the list of preferred networks? Edit some file somewhere maybe?
I am just trying Fedora from a USB flash drive on my Toshiba Portege t110 netbook. But it does not seem to detect any wireless networks (although I definitely have a few available -- when I boot up with Win7 it can detect them without issues). I don't know if something is wrong or there are some special steps I need to do to get wireless networks working in Fedora...
View 3 Replies View RelatedThis morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.
View 4 Replies View Relateddoes it still support the madwifi driver. i have tried to compile madwifi 0.94 that i got from svn and from sourceforge and it was succes, but the problem is it doesnt work. when i compile the source from subversion, i get the ath0 on iwconfig command but i can't get any wireless network on list of network. if i use the one from sourceforge, the iwconfig list even doesnt contain any ath*
View 3 Replies View RelatedI have F15 and use networkmanager to connect to wifi networks. How do I edit the list of saved wireless networks that it tries to automatically connect to? I need to get rid of some networks that it is always trying to connect to.
View 2 Replies View RelatedI could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedI've read through the stickied thread about troubleshooting my wireless and I've made it to step IV 'Making a connection.'I installed the firmware that my BCM4306 required, then tried 'sudo usr/sbin/iwlist scan'
View 2 Replies View RelatedI have a wireless network at home. My home laptop connects without any issue.I have a wireless network at work. My work laptop connects without any issue.If I take my work laptop home, it can see the network but cannot connect to it. I've checked the passphrase and that's fine, I've deleted the network from the Network Manager profile and re-created it - no luck.
The only thing I can think of is that I had to change the wireless router network channel at one point. I think that the work PC could access the network before that (but it was a while ago). I've tried changing the channel back, but to no avail. I have to keep the channel at its new setting anyway to avoid a loss of signal.What sort of things should I be checking/changing to get home connectivity on my work PC? The wired network is fine, but my wife draws the line at me looming over her desk with a red cable plugged into the back of my laptop.
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I'm running fedora 13 but I'm having issues with the wireless connection, I can see all the networks in the area but when I try to connect it does not seem to accept the wep key.Its a Belkin receiver, could do with a little help as this is such a pain. I'm using a pc.---------- Post added at 05:24 AM GMT ---------- Previous post was at 04:59 AM GMT ----------This maybe some use but I don't know much about it.
[Barry@localhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:8B:90:19:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
I click the little icon (I think it's called Network Management?) to selct my home wireless network and it's doesn't show ANY wireless networks what so ever
View 9 Replies View RelatedI currently have a HP Pavillion dv-6 and when I go into networks no wireless networks show up even though I know there are wireless networks in the area that I have previously used o a different computer.
View 8 Replies View RelatedI have a fresh install of Debian 5.04 Stable. It detects my wireless card with a RT61 chipset and gives me the option to select a wireless network through the network-manager icon in the upper panel, yet no wireless networks are displayed. So, how do I fix this and get the ability to connect to my network? I have tried connecting manually but it refuses to connect. No errors, it just does nothing and reverts to roaming mode.
I believe the exact model of my card is an Edimax EW 7128G.
i have a printer with a wireless connection and a router with wireless capabilities can i use it some how?
View 3 Replies View Relatedjust downloaded ubuntu 10.10. I have a dell inspiron 1501. How do I search and connect to wireless networks?
View 4 Replies View RelatedI have a MSI A6000 laptop (the laptop that won't accept 10.10 because of the nvidia card) so finally I opted to get Ubuntu 9.10. I successfully installed with a dual boot.
There are two problems though that I have ran into.
1. Ubuntu 9.10 is not picking up wireless networks.
2. The Ubuntu graphics (icons, taskbar and windows) are much to large. I am guessing this has to do with the Nvidia card (nvidia GeForce 8200m G).
I upgraded to Ubuntu 11.04, and the wireless was working fine until now when it does not recognize anything and says "No wireless networks found".f I plug the cable into my laptop, then it works (that's how I am communicating right now). I am not sure what the problem is, hardware or software.
View 9 Replies View RelatedI just installed Lenny and I was getting settled in. The wireless didn't work, but I have this USB adapter and was going to use it as a stop-gap measure until I get the real wireless going, especially since I could use that connection for downloading, forum search, etc.However, the USB adapter isn't working either. It seems to detect the adapter itself, since the "appendage" that appears on the right-click menu appears, but there's no detected networks. I have Jaunty dual booting with Lenny, and I know both the network and the USB adapter are working, since I'm on the Ubuntu side using both right now
View 14 Replies View RelatedI have an Acer Aspire 3000 and just installed a Netgear WGR614ver9.I installed FreeSpire and it works great.{well except} I am online with Eth0 now. It says the wlan0 is working but it does not see any wireless network. I tried it at a couple of places other than here where I thought it should detect a wireless network but it did not. How can I determine if it is FreeSpire or the Wireless card at fault?
View 1 Replies View RelatedI am fairly new to linux, I getting to grips with the offline and I am starting to be converted. The major problem I have is that I cannot get it to connect to my wireless network. I am using Fedora and my wireless card is the Belkin Wireless G Desktop Network Card - F5D7000uk (version 3000uk).
I am able to see the network and pick up the essid automatically through networkmanager or iwlist scan. I have tried to connect using Network manager:
- it picks up the information and I submit my WEP key and the icon top right shows two green dots with a blue flame(?) rotating between them for a few minutes before asking for my key again.
And using the terminal commands.
Code:
$ sudo iwconfig wlan0 mode managed
$ sudo iwconfig wlan0 essid "BTHomeHub3-12GT"
$ sudo iwconfig wlan0 key 563865428
then tried to test the connection using
Code:
$ sudo ping www.bbc.co.uk
ping: unknown host www.bbc.co.uk
Code:
sudo iwconfig wlan0
wlan0
IEEE 802.11bg ESSID:"BTHomeHub3-12GT"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management: off
Link Quality: 0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have an HP Netbook that has Linux MintI have absolutely no issues with awired connection, however my internal wireless will not search and find wireless networ in range. It appears I have one saved (my home network) and I can connect to that, however, if I take my laptop to school or work, it will not find any networks to connect to. On a side note, I have no icon on the taskbar indicating wireless, and I used to have one. I have no idea where it went or what happened. I can answer most questions you may have but im a relatively new linux user (but I have a coworker that "knows all" and could help answer a question that I cannot.
View 2 Replies View RelatedI am running debian testing dist-upgraded to sid with the latest gnome-shell. All is fine, I have recently moved to a new house and noticed that network manager wont detect my home wireless network. It does scan for networks and locates SSIDS from other local networks including my neighbours wifi where I can connect but will not detect mine. The modem router used is a zte quite popular in Greece and I have the broadcom wl driver installed. By the way since it is a dual boot machine - nasty win7 connect just fine and so does my mobile phone...
View 3 Replies View Related