I have a dual boot of winxp and fedora 12 on a sata laptop hdd in an external USB enclosure. I need to use the hdd for something else, so I want to create a clone image of the drive that I can later restore to a different hdd I put into the enclosure. What is the best method of doing this? Can I boot up into Linux on my external and create a single cloned image and save that image to the internal hdd on my computer? If so how do I do this? Is it a native function of Fedora or do I have to install a separate program?
I have a 120 gig drive that I'd like to clone before it fails completely. I was thinking I'd pull the drive from the server and build a separate machine that has it's own os installed and the source and destination drive. Does anyone know of any linux tools will will do a full drive copy? Additionally, If possible, I'd like to move to a larger drive. how I'd migrate the 120 drive to a 400 or so? 1 idea I have is to install os on 2 new drives to where it they will boot, Then boot with one and copy source to the newly created destination drive.
My HDD crashed (it wasn't completely disastrous, though). I was able to get my Ubuntu 10.10 partition of the disk with dd_rescue. I can see all of the data in the partition and everything. dd_rescue reported that there were no errors.Now, I have a fresh HDD, and I copied the image that I created with Gparted, and turned the boot flag on. I turn my system on, and all I get is a flashing cursor in the corner of the screen.I get the feeling that this would be easy for a seasoned user, but I'm not sure where to go. I originally got some information about cloning partitions here: [URL] But, it doesn't tell you how to reload the image after you make it.
I just finish setting Fedora 10 system including all the config that I like. I back up the image by using dd command.
Code: dd if=/dev/sda of=~/disk1.img
Now, I already have an image. how do I clone this image to second unit by using PXE boot server? I already have PXE boot server and it works since I installed Fedora from network (PXE boot).
I'm working on building a pre-patched image of Linux and Windows. Windows I used sysprep and worked out pretty well but not sure what is the steps for Linux? I am planning to use CentOS and Ubuntu, is there a command or script that will recheck the MAC address and prompt for new machine name?
In the end, with much gnashing of my teeth, I just started over and created a new 4gb flash. And, as one helper told me, it was truly easier a second go around. Not quick, mind you, but easier Now that I've got my flash somewhat stable, I'd like to know how to make a mirror image 'clone' of this flash to another, just like it. Between my Broadcom drivers, nVidea drivers, updates and flash/java, I've gotten pretty protective of this little flash drive! I've head 'dd' will do it, but, as a newb, is their an application or tool that might make the job easier.
i have centos 5.3 , i want to clone or create image of my working servers having centos5.3 in another hardisk so that if my server down i can just put this another hardisk which having image or clone of the crash server and my server will up in small amount of time is it possible or not if yes then how
I am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
how to clone a hard drive i managed to change the drive (12G) on the wife's old laptop for a spanking new 60G where i will be able to install Slackware.Even though her operating system is Windows Millenium everything went smoothly for the transfer , i used an older version of Gparted (0-3.4.10 i think).
I was given a forensic Image which I now know is a DD image of the drive (Vista) and am trying to mount the image or extract the image to another drive. I'm not sure of the extention type or if the image is a partition or the entire drive. I think it is the entire drive.
Is it possible to mount a DD image to a device. If I can't do that I just want to extract the files to run some programs against the drive. Can I view the files under Ubuntu or do I have to remove the drive and stick it into a Vista computer.
I purchased a second drive today and was hoping the command line would be something simple.
Or am I on the wrong track, should I be doing this all in a windows environment. The reason I picked ubuntu was because of the reporting tools.
i'm trying to clone a hard drive using dd & netcat.
Quote:
on target: nc -l -p 1333 |dd of=/dev/sdb on source: dd if=/dev/sdb |nc 192.168.0.5 1333
However after a while since the process was initiated I get a
I/O error in filesystem ("....") meta-data dev ...block 0x..... ("xfs_read_buf") error 5 buf count 512 XFS: size check 2 failed
Further digging showed that the target hard drive was less in space by 100 kb. Both are 1 T drives seagte but different models, hence the diff in space maybe.The data on the original drive is only 900 GB.
My Ubuntu system drive is starting to throw up S.M.A.R.T. errors. I have two partitions on the drive (/home and /) and grub in the mbr. Is there a way to exactly clone this drive to another one so I don't need to reinstall or re-setup anything?
I have not been able to clone my drive since the upgrade to Natty. This was never a problem for me in 'any' previous distro. I have a dual boot Windows 7/Natty system; and I never have a problem with the Windows partition getting cloned. partclone (Clonezilla) crashes about an hour and 15 min into the cloning of the Ubuntu partition. I'm getting a "buffer-overflow" error. I'm using clonezilla-live-1.2.5-35-amd64; and have been since Lucid. I've recently downloaded clonezilla-live-1.2.8-42-amd64.iso and am burning it to DVD now. I don't know if this is going to help; but I'm ready to try anything; as this is my only means of disaster recovery! During the reboot into Natty, I received some error messasges stating that there were inode problems. I don't know if this was on the source or destination drive; as I still had the destination drive connected to my USB port. Then I started thinking... What package, that wasn't there in Maverick, that is present in Natty messes with inodes???
Then I thought ZeitGeist So I ripped it and everything connected to it out-by-roots and tried running Clonezilla again; but no luck...Has anyone else had this problem; and what can I do about it I've replaced all of the relevant hardware; and two days and $500 later, I still don't have a solution.
however, I couldn't find a place in which it would really fit well. I have 2 hard drives, that I want to backup. I've heard of servers and things like that using a hard drive image. Is this similar to a disk image? What are the benefits of using hard drive imaging as opposed to using DVDs? And perhaps most importantly: how would I go about it using Fedora 10 (64 bit)?
I have two old windows 95 computers. The problem is I have files and programs that have specific settings that I need. The computers are old and I want to just make a copy of the hard drive and insert it into virtual box. How can I do this?
I'm looking to move my 10.04 installation from an 80 GB HD to a 250 GB HD.
Last week, I successfully moved a Windows system from an 80 GB HD to a 320 GB HD using Clonezilla. However, I must have missed a command option, as I wound up with only 80 GB used on the new drive, and the remaining space unused. I used PartedMagic to resize the partition to use the full space, and all is now well.
Back to my Ubuntu move, on the second machine, I currently have three partitions - /, /swap, and /home. I'd like to expand / just a small amount, leave /swap sized as it is, and give most of the drive space to /home (as that is where I am running out of space). I think I have two options:
Option 1: Use Clonezilla to clone the drive (3 partitions), and then use PartedMagic to move/resize the partitions as desired.
Option 2: Use PartedMagic to set up 3 partitions to the sizes I want, then use Clonezilla to copy to the new partitions.
Option 1 seems to be the easier way. But, is there another option, a better way? Perhaps there's a command option in CloneZilla that I'm just not seeing, which would allow me to do the move in one step?
I currently have a 160GB hhd running Ubuntu 11.04 and Windows XP, with the following partition configuration:
sda1 Windows NTFS (primary-active and boot and system) sda5 Linux Swap (logical) sda6 Linux Ubuntu ext3 (root) sda7 Linux Ubuntu ext3 (home) sda2 other
I have Grub2 installed, which provides me the choice at boot to start either Ubuntu or XP. This currently works fine.
I want to clone this hhd and transfer to a new, larger hhd, and have several questions, since I don't want to make a mistake with something so crtical. 1) Which software is generally considered the safest, most reliable and easiest to use (dd, Gddrescue, Clonezilla, Paragon, Macrum Reflect, Easeus, Drive Image XML, or something else)?
2) Which software will be able to copy and include both operating systems in the partitions to be cloned?
3) Will that software change the booting process or options in the cloned copy in any way? I've read where using Easeus corrupts Grub2 and thus requires re-installing Grub2!
Are there any other concerns, considerations or factors I need to consider in cloning the hhd; e.g. prior formatting an external hhd, and with what file system? I've also read where FAT32 would be the choice, but don't really know for sure.
I want to clone an SGI IRIX hard drive over the network. The hardware is ancient, no usb, and the CD rom is shot, its scsi and Im worried I wont be able to get it to boot a live cd.
if I run dd on a running computer, what consequences might there be?
Code: dd if=/dev/sda | gzip -1 - | ssh user@hostname dd of=image.gz where /dev/sda is the local IRIX computer and of=image.gz is a free partition else where.
I wanted to back up my 4Gb boot drive and the new drive I had was slightly smaller. Couldn't find any info on here and precious little on the internet but I have previously used this technique to clone an 8Gb disk onto a 4Gb one. Since I have gained a lot of useful info from this forum over the years its probably time I contributed something. I used my netbook but this would work equally well from a live CD. Note the disk has to be unmounted so you can't use the live system. Firstly your USB stick probably has 2 partitions one for "/" and one for swap.
The first step is to reduce the "/" partition on the source drive to a size smaller than your target drive. I used gparted for this. Next create a partition on your target drive that is the same size or bigger than your newly shrunken partition. I formatted this although I'm not sure this is necessary. Personally I just used the whole drive and used a file on a hard disk as swap. Next you have to use dd to copy the partition.What is important is that you are copying the partition not the drive. So your source would be /dev/sdx1 and target /dev/sdy1 (you will need to find your own values for x&y).
Once again be very careful that you get these the right way around or you will destroy your souce disk. Even better do it in two stages - copy your source to a file and then the file to the target. Now you have a replica of your original disk but it is not bootable. If you are planning to use a swap partition you may as well create it now. Remember you will probably have to change /etc/fstab to read the new swap - at least on my system this was referenced by UUID. No need to change anything for the replicated partition as the UUID came over with everything else.
I have a 3 weeks old PC which I've just finished getting set up with Ubuntu 11.04 and W7 in a Virtual Box. Now the drive has started making rumbling noises and doesn't always boot.The engineer from Dell is coming tomorrow to replace the drive, but what can I do about transferring the whole old drive to the new one in full working order, quickly?
I've been using rsync to keep backups of my home folder, so I've got the data side covered. But I don't really want to spend the next couple of weeks re-installing all the software, printers etc all over again. So is there a quick, easy way of replicating the old drive with partitions, VB, etc (I'm not that good at using the terminal) ?
I'm trying to install Fedora 12 on my EeePC 901 from a 8GB USB stick. However I get the error each time after clicking Next on the boot loader setup screen. Code: Missing ISO 9660 Image The installer has tried to mount image #1, but cannot find it on the hard drive. Please copy this image to the drive and click Retry. Click Exit to abort the installation. I tried this with the DVD as well as the net install image. I tried setting up the USB stick with unetbootin and semi-manually [1]. I still get the same error.
I've set up the first 4GB SSD (sda1) as / ext4 partition and the second 16GB SSD (sdb1) as an encrypted /home partition. sdc1 is the USB stick and sdd1 is a 16GB SD card in the card reader. They are not used in the installation. I realize, that the 4GB / partition will probably be too small etc, but I'm just trying to get the installer to go the package selection page.
This probably is something simple, and may have already been addressed on here.I have a 1.4MB floppy disk image file that I would like to mount as a drive.
I have an image fiole of a hard drive which has been encrypted. When i load the file in to software to view the disk in a hexidecimal format, i need to find there the boot sectors are etc I also need to find out the "md5 hash" which is used?
I am running Fedora 10 and would like to move from my 40gb hard disk to a larger (320gb drive). I would like to take an exact image of the smaller drive and put this on the bigger drive.
I've got a nice new faster hard drive and want to move my system to it.Is there something that can clone the current drive AND update the menu.lst with the appropriate device ID's so I can just take out the old drive and carry on as before?
I have a very specific issue that I am having trouble resolving. I have an old laptop and a new laptop with a smaller HDD. I want to copy the windows partition from the new lappy to the old bigger HDD so I have room for Ubuntu. All of my files are on a Maverick install on the old lappy. How can I get all my files and windows to the old HDD and into the new laptop. I am a little stuck on this one because of my limited options.
