I've got a nice new faster hard drive and want to move my system to it.Is there something that can clone the current drive AND update the menu.lst with the appropriate device ID's so I can just take out the old drive and carry on as before?
View 1 Replies
My Ubuntu system drive is starting to throw up S.M.A.R.T. errors. I have two partitions on the drive (/home and /) and grub in the mbr. Is there a way to exactly clone this drive to another one so I don't need to reinstall or re-setup anything?
View 1 Replies View RelatedI'm looking to move my 10.04 installation from an 80 GB HD to a 250 GB HD.
Last week, I successfully moved a Windows system from an 80 GB HD to a 320 GB HD using Clonezilla. However, I must have missed a command option, as I wound up with only 80 GB used on the new drive, and the remaining space unused. I used PartedMagic to resize the partition to use the full space, and all is now well.
Back to my Ubuntu move, on the second machine, I currently have three partitions - /, /swap, and /home. I'd like to expand / just a small amount, leave /swap sized as it is, and give most of the drive space to /home (as that is where I am running out of space). I think I have two options:
Option 1: Use Clonezilla to clone the drive (3 partitions), and then use PartedMagic to move/resize the partitions as desired.
Option 2: Use PartedMagic to set up 3 partitions to the sizes I want, then use Clonezilla to copy to the new partitions.
Option 1 seems to be the easier way. But, is there another option, a better way? Perhaps there's a command option in CloneZilla that I'm just not seeing, which would allow me to do the move in one step?
I have a very specific issue that I am having trouble resolving. I have an old laptop and a new laptop with a smaller HDD. I want to copy the windows partition from the new lappy to the old bigger HDD so I have room for Ubuntu. All of my files are on a Maverick install on the old lappy. How can I get all my files and windows to the old HDD and into the new laptop. I am a little stuck on this one because of my limited options.
View 8 Replies View RelatedI am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
View 2 Replies View RelatedI have a 120 gig drive that I'd like to clone before it fails completely. I was thinking I'd pull the drive from the server and build a separate machine that has it's own os installed and the source and destination drive. Does anyone know of any linux tools will will do a full drive copy? Additionally, If possible, I'd like to move to a larger drive. how I'd migrate the 120 drive to a 400 or so? 1 idea I have is to install os on 2 new drives to where it they will boot, Then boot with one and copy source to the newly created destination drive.
View 6 Replies View RelatedIs there was a way to update from 8.04 directly to the current version without going through all the others (8.10, 9.04, etc..)?
or ...
Will it be easier with the next LTS (10.04)?
about this ....!
Will it be possible to migrate directly from 8.04 to 10.04, one LTS to another?
I am trying to clone the hard drive to a slightly smaller hard drive in the same computer, same setup.What software or commands do you use to clone the entire system and resize the partition automatically?The original HD is a little larger than the destination HD. The source partition only has about 20 GB in use and the rest is blank.
I have 2 partition, a small 100MB boot partition and another 500GB LVM partition.I can't just clone from the original disk to the new disk. (for another long reason) I need to make an image of the original disk on an external USB drive first, then move that image onto a new disk.I have tried creating an image of the whole disk with Clonezilla, but then the restoration didn't work because the target drive is smaller than the original.
would it be possible to clone an IDE hard disk (on which I installed Fedora 10) on a SATA hard disk, and that programs can succeed
View 10 Replies View Relatedim having problems with update to new kernels..here is the error info: error is: Multiple packages exist that are not compatible with each other. This is usually due to mixing packages from different software origins. ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.30.5-43.fc11.x86_64 is needed by kmod-nvidia-2.6.30.5-43.fc11.x86_64-185.18.36-1.fc11.1.x86_64
kernel-uname-r = 2.6.30.8-64.fc11.x86_64 is needed by kmod-nvidia-2.6.30.8-64.fc11.x86_64-185.18.36-1.fc11.2.x86_64
kernel-uname-r = 2.6.30.9-96.fc11.x86_64 is needed by kmod-nvidia-2.6.30.9-96.fc11.x86_64-190.42-
[Code]....
I'd like to install Lucid on a spare hard drive I have, so I can do my bit for testing it. I have a feeling that if I just burn the latest alpha .iso and install from that, it will replace my current GRUB, whereas I would prefer to simply add the Lucid install as an option in my current GRUB.
Of course I might be wrong, I just wanted to check before I went ahead with it. I was unable to find the info I needed via searching.
When I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
i'm trying to clone a hard drive using dd & netcat.
Quote:
on target:
nc -l -p 1333 |dd of=/dev/sdb
on source:
dd if=/dev/sdb |nc 192.168.0.5 1333
However after a while since the process was initiated I get a
I/O error in filesystem ("....") meta-data dev ...block 0x..... ("xfs_read_buf") error 5 buf count 512 XFS: size check 2 failed
Further digging showed that the target hard drive was less in space by 100 kb. Both are 1 T drives seagte but different models, hence the diff in space maybe.The data on the original drive is only 900 GB.
I have not been able to clone my drive since the upgrade to Natty. This was never a problem for me in 'any' previous distro. I have a dual boot Windows 7/Natty system; and I never have a problem with the Windows partition getting cloned. partclone (Clonezilla) crashes about an hour and 15 min into the cloning of the Ubuntu partition. I'm getting a "buffer-overflow" error. I'm using clonezilla-live-1.2.5-35-amd64; and have been since Lucid. I've recently downloaded clonezilla-live-1.2.8-42-amd64.iso and am burning it to DVD now. I don't know if this is going to help; but I'm ready to try anything; as this is my only means of disaster recovery! During the reboot into Natty, I received some error messasges stating that there were inode problems. I don't know if this was on the source or destination drive; as I still had the destination drive connected to my USB port. Then I started thinking... What package, that wasn't there in Maverick, that is present in Natty messes with inodes???
Then I thought ZeitGeist So I ripped it and everything connected to it out-by-roots and tried running Clonezilla again; but no luck...Has anyone else had this problem; and what can I do about it I've replaced all of the relevant hardware; and two days and $500 later, I still don't have a solution.
I downloaded and installed beta1 a few days ago but have just noticed beta2 is now available. Do I need to download beta2 and re-install or will my current beta1 update to beta2 via update manager?
View 6 Replies View RelatedI have two old windows 95 computers. The problem is I have files and programs that have specific settings that I need. The computers are old and I want to just make a copy of the hard drive and insert it into virtual box. How can I do this?
View 4 Replies View RelatedI currently have a 160GB hhd running Ubuntu 11.04 and Windows XP, with the following partition configuration:
sda1 Windows NTFS (primary-active and boot and system)
sda5 Linux Swap (logical)
sda6 Linux Ubuntu ext3 (root)
sda7 Linux Ubuntu ext3 (home)
sda2 other
I have Grub2 installed, which provides me the choice at boot to start either Ubuntu or XP. This currently works fine.
I want to clone this hhd and transfer to a new, larger hhd, and have several questions, since I don't want to make a mistake with something so crtical. 1) Which software is generally considered the safest, most reliable and easiest to use (dd, Gddrescue, Clonezilla, Paragon, Macrum Reflect, Easeus, Drive Image XML, or something else)?
2) Which software will be able to copy and include both operating systems in the partitions to be cloned?
3) Will that software change the booting process or options in the cloned copy in any way? I've read where using Easeus corrupts Grub2 and thus requires re-installing Grub2!
Are there any other concerns, considerations or factors I need to consider in cloning the hhd; e.g. prior formatting an external hhd, and with what file system? I've also read where FAT32 would be the choice, but don't really know for sure.
I want to clone an SGI IRIX hard drive over the network. The hardware is ancient, no usb, and the CD rom is shot, its scsi and Im worried I wont be able to get it to boot a live cd.
if I run dd on a running computer, what consequences might there be?
Code:
dd if=/dev/sda | gzip -1 - | ssh user@hostname dd of=image.gz
where /dev/sda is the local IRIX computer and of=image.gz is a free partition else where.
I wanted to back up my 4Gb boot drive and the new drive I had was slightly smaller. Couldn't find any info on here and precious little on the internet but I have previously used this technique to clone an 8Gb disk onto a 4Gb one. Since I have gained a lot of useful info from this forum over the years its probably time I contributed something. I used my netbook but this would work equally well from a live CD. Note the disk has to be unmounted so you can't use the live system. Firstly your USB stick probably has 2 partitions one for "/" and one for swap.
The first step is to reduce the "/" partition on the source drive to a size smaller than your target drive. I used gparted for this. Next create a partition on your target drive that is the same size or bigger than your newly shrunken partition. I formatted this although I'm not sure this is necessary. Personally I just used the whole drive and used a file on a hard disk as swap. Next you have to use dd to copy the partition.What is important is that you are copying the partition not the drive. So your source would be /dev/sdx1 and target /dev/sdy1 (you will need to find your own values for x&y).
Once again be very careful that you get these the right way around or you will destroy your souce disk. Even better do it in two stages - copy your source to a file and then the file to the target. Now you have a replica of your original disk but it is not bootable. If you are planning to use a swap partition you may as well create it now. Remember you will probably have to change /etc/fstab to read the new swap - at least on my system this was referenced by UUID. No need to change anything for the replicated partition as the UUID came over with everything else.
sudo ddrescue /dev/sda /home/custom/user/sda_image.img /home/custom/user/logfile
problem is would not mount under /mnt to see if it worked
sudo ddrescue /dev/sda /home/custom/user/sda_image.iso /home/custom/user/logfile
the sda_image.img file is 55gb the other one tht is .iso is 0gb so now trying
dd if=/dev/sda of=/home/custom/usr/sda_image.iso
waiting to see what is going on any body got any advice on how to make the image work?
I have a dual boot of winxp and fedora 12 on a sata laptop hdd in an external USB enclosure. I need to use the hdd for something else, so I want to create a clone image of the drive that I can later restore to a different hdd I put into the enclosure. What is the best method of doing this? Can I boot up into Linux on my external and create a single cloned image and save that image to the internal hdd on my computer? If so how do I do this? Is it a native function of Fedora or do I have to install a separate program?
View 11 Replies View Relatedhow to clone a hard drive i managed to change the drive (12G) on the wife's old laptop for a spanking new 60G where i will be able to install Slackware.Even though her operating system is Windows Millenium everything went smoothly for the transfer , i used an older version of Gparted (0-3.4.10 i think).
View 1 Replies View RelatedI need to clone LVM encrypted to a bigger size hard drive.
Need help with MBR, how should I do it?
I have a laptop with a sata drive that is almost full I need to get a bigger hd for it.Is it possible to clone an encrypted FC11 drive?
View 1 Replies View RelatedI upgraded my main box to Ubuntu 10.04 and everything runs fine, except for a problem with grub: I can't modify the boot menu in any way, I'm stuck with what grub2 thought was the optimal setup at installation time (and it got it wrong, btw). The current boot menu lists:
- my older 9.10 install in sdb2 (one kernel)
- legacy windows XP install on sda1
- my even older 9.04 install in sdb1 (two kernel versions)
- my new install in sdb3, with only one kernel (the one coming with the distro CD)
I tried anything I could think of to modify this menu:
- modify the /etc grub config file then running sudo update-grub
- using a specific app (system manager? don't remember its name)
- upgrading to the latest kernel
- removing and reinstalling grub
to no avail: the menu is still there in the above form, and I have to manually select the 10.04 (old) kernel by hand every time I reboot.
I have a 3 weeks old PC which I've just finished getting set up with Ubuntu 11.04 and W7 in a Virtual Box. Now the drive has started making rumbling noises and doesn't always boot.The engineer from Dell is coming tomorrow to replace the drive, but what can I do about transferring the whole old drive to the new one in full working order, quickly?
I've been using rsync to keep backups of my home folder, so I've got the data side covered. But I don't really want to spend the next couple of weeks re-installing all the software, printers etc all over again. So is there a quick, easy way of replicating the old drive with partitions, VB, etc (I'm not that good at using the terminal) ?
After upgrading to 11.04 from 10.10 they were there, but now I see no panel, no menu. Just desktop with icons with 1200 screen resolution. I can change keyboard with shortcut. No other shortcuts working.
View 1 Replies View RelatedI have a mini ITX computer that runs a software that I have been trying to clone to another hard drive as back up. When I do clone it, it is the exact same copy down to every byte. When I try to boot from the cloned hard drive, it starts booting, then displays some text:
Then is says some of the files are not found including a encryption signer key not found.
I do no know the next step I need to take. Is this becasue it is running off a different hard drive? I do not understand a bzImage too well, but does it have anything to do with that file?
I have an old Dell Dimension 2400, currently running winXP. It has a second hard drive attached onto which I'd like to install ubuntu. The drive is visible in My Computer, but when I began the install process, ubuntu didn't give me any option to install on the second drive; it doesn't seem to see it's there. I went into the Setup menu and the drive isn't found there. Does anyone know what I need to do to configure things so that I can get ubuntu onto the second HD?
View 2 Replies View RelatedI have Ubuntu 11.04 on a hard drive that has Windows 7 as well. I just obtained another hard drive and want to move Ubuntu and all of the contents therein to the new drive, so I can have one drive dedicated solely for Windows (for the family) and Ubuntu on the other. The current drive is a SATA drive and the new is an IDE if that makes a difference.
View 6 Replies View Related
