I just installed Fedora and had what appeared to be 2 panels showing so clicked on one 2 hide it, now I can't see anything on the other panel. If I move my mouse over the panel I see:
my name
the date
A note pad which disappears when I move the mouse over it and thats it. Sometimes when I point my mouse at them they disappear as well. How can I get my panel back? I thought maybe adding an application to the desktop to open a terminal session would be a good way to start, but i don't know where or what the command is for this. (I did mange to set one up so I could start Firefox). If I Open a terminal session then what do I do to get my panel back ?
Today morning i accidentally deleted the top gnome panel. I created a new one which was just an inch wider. But i am not able to change any of the properties of the panel except position. It says some of the properties are locked down. I have gnome-panel installed already in my system. How do i enable these locked properties.
I just installed Ubuntu 10.10 to try out right? Well, I tried to expand the height of the bottom task bar to 35, and when I did, it had an graphical issue happen. Its almost as though the image isnt large enough so it starting repeating it to fill in the height. I think I can do screenshots so I can show below. Is there anyway to fix that?
The other question I have is, why is GNOME and KDE both using such larger buttons and drawing then Windows or even MacOS? Can they be made smaller? I can include screenshots for those if I need to.
In a previous version of UBUNTU I was able to enter a NVIDIA control panel to adjust my RGB settings. Now I'd like to change it slightly but there doesn't seem to be a NVIDIA control panel. There used to be two of them. After installing the video driver, If I tried to go into UBUNTU video settings I would get a console message stating I now need to use NVIDIA control panel and would automatically open it for me.
I have the panel (taskbar) positioned on top. I then turned on "auto hide" in the panel properties (Gnome) to maximize the screen.The panel surely disappeared. The problem is that I cannot get it back no matter how much I hoover or click with the mouse - it is gone!...So how do I get it back??? I am rather new to Linux, but I figure that there should be a config file somewhere where I can set "auto hide" to false or something like this.
I'd like to know, what happened to this tool? Till F10 this tool was responsible for automounting Usb drives/Cdrom drives that were connected before I logged into the System via gdm. Since F11, this feature seems to be gone. I recently noticed that my external usb disk stopped to "automagically" appear on the desktop after login. Now I have to powercycle the disk (switch off, switch on) to have it appear on the desktop again. Is there an alternative tool to gnome-volume-properties, or do I really have to play around with hal to get this back? Doesn't really makes to me any sense to remove this feature.
This might seem like an odd problem, but I can't find gstreamer-properties on my system. Also I can't find a package that provides it. I have tried the following gstreamer gstreamer-tools gnome-media control-center control-center-extras control-center-filesystem
None of those seem to provide the file. can someone who has gstreamer-properties do a Code: rpm -f gstreamer-properties and let me know what rpm provides that file ?
i've recently switched from windows to fedora 15.....in windows i used to use "ALT+ENTER" to view file properties like size etc. what is the shortcut for the same in fedora 15....?
After a fresh install of Fedora 12 I'm delivered to the image on the attachment. Well aside from not being able to see icons on the left, or go to the any terminal and not seeing anything and be forced to blind type and hope for the best there are some other issues. Enabling panel transparency shows video artefacts on the panel.nouveau doesn't enable 3D(I use a NVidia GeForce 9600 GT 512MB and my monitor is a ACER LCD X223W)) kind and point me to resources about the nouveau driver and how to configure it so it starts to work?
I am unable to access the File Management properties.I go System > Preferences > File Management.I get a "Bug Buddy" window (I filed a report, details below).Or, it also happens if I type: 'nautilus-file-management-properties' in the terminal.
I'm trying to go through the ProLinga tutorial and it's calling for gnome-database-properties and my research says that it is in the libgnomedb packages. However, I can't find anyplace that has this package. Has it been removed from Fedora 13?
I just update the system, and the cpu frequency applet stop working. I can no longer lock the cpu frequency. Once I click the cpu applet icon, The whole applet just freeze right there. Does not matter if what I do with it. Well, at least I hope some one just offer me a bit help on how to lock the cpu frequency in terminal. Other wise I can not run Folding@home due to cooling issue.
Post added at 05:08 AM CST Previous post was Yesterday at 11:58 PM CST Well, it seems like the program take of authentication is mess up. I have the same problem when I tried to config my firewall. In the Firewall case, once I type in my password, the whole window just went blank. For the cpu applet case, nothing happen, the window ask for password does not show up. nothing. The system log did not have any entry...neither does the crash log. Which there are lot of entry there since I install F12
since yesterday when I open up an explorer style window, say I browsed folders in Gnome for each folder it opens a new window. However; when I go to change it so it does it in the same window either through edit properties or system/preferences/file management it does not open and instead a bugzilla window opens as it crashes (taking my desktop with it until it refreshes)
In gnome-network-properties I've set up two proxy locations: default and remote.
It's a bit of a fag having to change between them via the gui depending on where I am. Can the proxy be changed by command line because then I can set up a script to use the right proxy automatically? - e.g. use remote proxy if my mobile is connected via usb.
Had a google but don't think gnome-network-properties has command line options so I might be approaching this from the wrong tack.
in fedora 10 things were pretty simpler . all i had to do was double click the volume icon and i could change the volume of each of my speakers individually ...
in fedora 11 that was not possible , this adjustment of volume had become more complicated, however there was this "advanced volume control" or something ... i dont quite remember its name , but thanks to that i could still adjust volume of each of my speakers individually ...
in fedora 12 i m not able to find that application - "advanced volume control" ... how do i adjust the volume of my each of my 5.1 speakers in fedora 12 ?
Running F14 on Dell Studio 14 with LCD screen and US keyboard selected. After initial power on the keyboard selection of "Windows Key" + F4 will dim the screen and the "Windows Key" + F5 will brighten the screen. When being used, either combination will also show a meter on the screen to display the adjustment of the brightness. When the lid is closed the computer is set to suspend by default. After the computer is brought back from suspend the keyboard short cuts no longer control the brightness and the meter does not appear on the screen. I have not found any other way to control the brightness and I have to restart to get the keyboard short cuts to work again.
Does any one know how to get the name back on the gnome panel. It seems to have disappeared , I tried using the add to panel feature by right clicking on the panel but cannot locate it in the list.
I am trying to install blueman on fedora 12. I am compiling it from source. Because their is no rpm file for this. In configuration their is error
bluez is not find..but I have installed bluez-4.57... Error is:- Consider adjusting PKG_CONFIG_PATH environment variables if you installed software in non standard prefix.. set evn variables BLUEZ_CFLAGS and BLUEZ_LIBS...
How can I set these variables..to get rid of this error. I want to connect to internet through GPRS enabled phone through bluetooth. Any other way to connect to internet through bluetooth. I am using fedora 12.
I'm writing a script to toggle LCD backlight on my laptop between minimum and previous/current level. I will then assign this script to a button. For this I need to be able to adjust backlight by using some command line utility. Also, this must be possible to be performed by a regular user.
What I have already tried:
1) The "xbacklight" utility. This didn't work. Program reported something like "no outputs found".
2) Used "acpitool -l <backlight_level>". This didn't work either.
3) The "echo -n 100 > /proc/acpi/video/VGA/LCD/brightness" works only when I am root. Changing permission of the file to allow writes by a user only valid until reboot. After reboot I need to change permission again, so this approach is not good either.
What works on my laptop, but with GUI:
1) Adjusting LCD brightness in "System->Preferences->Power Management" works.
2) Adjusting brightness with Gnome Brightness Applet works. However, after changing brightness with applet it says "Cannot get laptop panel brightness" and shows red crossed circle icon. Even after applet shows this message, it is possible to change the backlight level. It seems like the brightness level cannot be retrieved by the applet/system, but it can be set.
I can see that it is definitely possible to adjust LCD brightness through software because of the 2 things above, but how do I allow any user to change it from command line?
So, what are my other possible choices for changing backlight from command line?
I've done the usual edit of /etc/sysctl.conf to include the parameter, but it just tosses errors. I haven't had to tune a kernel in a very long time, what's different about it nowadays (or have I simply forgotten how)?
edit: Added "kernel.semmni = 2048" to the tail of /etc/sysctl.conf and then ran "sysctl -p". End result is an unknown key error (apparently kernel.semmni isn't the valid name anymore?).
I've had this problem since I fresh installed Fedora on my laptop: I can play sounds fine, but I can't mute/make it louder or softer. I couple days ago (right after I installed) there was a notification saying there was an error with something in the sound and it was "falling back to default". Recently, the notification stopped popping up but the problem persists.
I'm not 100% positive as to what type of speakers my laptop has. I know they're made by JBL, but on Windows they're handled by "RealTek HD Audio Manager" and in Device Manager there's 2 different audio devices: Realtek High Definition Audio and ATI HDMI Audio. Neither of them say they're JBL brand. The most information I can get out of the specs of my laptop found on Newegg is that they're "JBL stereo speakers (1.5 watt x 2)".
When I right click a file or folder in the Nautilus file manager (Gnome3 on F15) and choose "Properties", I no longer get a Properties dialog. Instead, Nautilus just sits there, frozen.I tried running it from a terminal, and this is the output it generated:
Code: $ nautilus Gtk-Message: Failed to load module "pk-gtk-module"
If I: 1. Add drawer(s) on the gnome panel 2. add items to one or more of those drawers 3. reboot then: 1. all empty drawers can operate normally 2. drawers that have stuff in it cannot be opened.
Im trying to run a program but my system won't let me.i used to be able to run executable files without a problem but i can't anymore when i double click the file i get "there is no application installed for executable files" i am unable to check "allow executing file as program" in file properties there is a script file which runs the program but all i get from the terminal is "permission denied"
