Fedora :: Permissions - Properties If Not Root ?
Apr 17, 2010I cannot change things in files because I get, you do not have permission, you are not the owner. Root is the owner, so how can I get permission ?
View 4 RepliesI cannot change things in files because I get, you do not have permission, you are not the owner. Root is the owner, so how can I get permission ?
View 4 RepliesI have a usb port problem. I am trying to set up printers to usb port. When II have setup printer to connect to usb. When I test connection, it prints. Any other part of printer setup, shows up in the Que, but will not test print.Seem that my usb port does not have permissions set up properly. How do I set up permissions and keep them setup?
View 7 Replies View RelatedAfter I edit /etc/group and I add a user to groups it didn't belong to, the user will not be able to use it's newly acquired privileges unless it starts a new session. Is there a command to refresh user/group properties in an ongoing session?
View 2 Replies View Relatedafter a fresh install of fedora 13 I was expecting a few niggles and here's one, I've googled and read man chmod and chown and there seems to be plenty of conflicting advice, oh yeah the problem, I installed a package called get_iplayer (allows downloading of bbc iplayer content) via yum, only thing is I can only run it as root whereas in f12 I could as a normal user. It's probably the simplest command to change permissions, also I can't find any info on what the different numbers mean (775 777 etc)
View 11 Replies View RelatedNew to Linux, want to tinker around but cannot figure out how to get root permissions to my login, or login as root (can do this in terminal, but that is not much help for the rest of the environment I am working in!).
View 19 Replies View Relatedwhen i move to /usr/share/backgrounds/ and after right click when i go to properties then in tab of Permission it says I am not ROOT user. through TERMINAL I changed the root password using commands (sudo passwd root ) tthe changes has been made succesful eventhough it does not give me root user status.When i connect to internet then after click of connect button ,a pop up appears and says "Enter password to unlock your login keyringThe password you use to log in to your computer no longer matches that of your login keyring."
View 1 Replies View RelatedGet Fedora 11 and Apache installed. Open web browser and enter http://localhost and I get a "Fedora Test Page" that shows Apache is working (according to the info on the page). It says to put my web documents in /var/www/html/ ... however, as a user I cannot access it (put anything there) and I can't change the permissions (belongs to root) I'd like to run this as an intranet web server in our small ( <100 users) company.
View 6 Replies View RelatedI'm Ubuntu ex-fan (because of gnome-shell).
On Ubuntu, there was this very sane feature (for laptop/desktop user): when you insert a thumbdrive or external usb media, the system mounts the media and sets all the correct permissions for the current non-root logged in user.
What do I have to change/edit/configure to make Fedora 15 behave like this?
I have the file for Conky Wizard ver.1 but in order to run it to make it executable. From what I know, I'm supposed to right click the file and press properties thego to permissions and check "allow executing as program" However, this option is missing. Here is the link to the ConkyWizard Ver1 Beta 1 file.
View 9 Replies View Relatedi borrowed an external hard drive from my friend to back up a load of stuff on my windows partition before reinstalling it. I am doing this through ubuntu. I am trying to zip up folders like My Documents etc and chuck them on the external hard drive but it always comes up with errors to do with read/write permissions. In the permissions tab on the folder properties of the ext hard drive it says I am owner but i have no file access (only folder access is create and delete files). When i try to give myself read/write permission it just goes straight back to nothing when i look at it again.
View 2 Replies View RelatedAccidentally I changed the ownership of all the directories under / to my own instead of root:root. Now I am unable to use sudo and many bad things are happening. Is there a way to revert the changes or change the permissions again to root:root or make sudo work ?
View 3 Replies View RelatedI'm very new to Linux, i'm running Ubuntu and i'm trying to install a program. In the instructions it says "Check that you ARE NOT root, never run similar tools as root! just change file permissions". How do i check if i'm root or what am I supposed to do here?
View 7 Replies View RelatedHow to enable Root login...i cant copy or move something on the HDD...I have administrator rights and password for root but i cant change permissions for the HDD without login on root and root login are not allowed .
View 10 Replies View RelatedA bit of an oddity that I've recently run into with my storage folder in my system; it's a newly installed drive that I've set to mount at /storage. When I first tried to use it, programs that I used that attempted to write to it tossed Access Denied errors at me in their own way. Checking the permissions (at the Terminal, ls -l / | grep storage) showed that /storage was set to 'rwxrwxr--'--Owner and Group were given full read/write/execute, but Others could only read. However, my logon to my system is a member of group root. Why, then, with the above bits set, would I not be able to write to it? Changing Others permissions to rwx (and presumably rw would have worked out for me since I don't leave anything executable there) allowed me to write to it, but I don't understand why that would have been necessary. So far as I'm aware, the prior drive that was in my system--mounted at the same location--did not need this treatment.
View 7 Replies View RelatedI need to add some files in /usr/local/include but the folder properties says "you are not the owner"
I guess I have to be root to perform it. now how do I get root permissions to copy files to that folder using Nautilus? using the terminal would be a bit of messy..
I've got some troubles when I try to install Vim on Linux while I don't have a root account. The error information is shown below: How can I solve this? Can I install it in another directory other than /usr/local/bin/vim?
View 2 Replies View RelatedHow would I change the permissions for a specific program(xsane)? For some reason Xsane only works now if I run as root. It was working fine before the latest kernel update, now I get "cannot start scanner: invalid argument" unless I run the program as root. Also images that are scanned are nor accessible unless I am root
Epson Stylus NX215
Ubuntu 10.04 64 bit
The printing feature works fine still.
Iscan is installed from avasys.jp
Rolled back to old kernel and problem still exists
I use netbeanse as a development suite, but to edit/save file correctly it should run with root permissions. When I do run file or debug them, it launches firefox, but due netbeans have been opened by root user, it tries to open firefox as root also, and it seems to be something that should not do. Either I now upgraded to ubuntu 9.10 karmic koala and sudo firefox does not work anymore, giving me no errors even from CLI.
View 1 Replies View Relatedhow to use permissions. I ran into a weird problem in which I am unable to change permissions as root. I have a file I've been testing commands on, and somewhere along the line I think I gave it zero permissions. Now I'd like to restore some permissions, but can't. Here's what I'm looking at:
Code:
jeremy@jeremy-laptop:~/test$ ls -l
total 16
-rw-r--r-- 1 jeremy jeremy 235 2011-05-17 13:15 onelink
-rwxr-xr-x 1 jeremy jeremy 27 2011-08-02 18:05 threecopy
-rwxr-xr-x 1 jeremy jeremy 27 2011-05-09 17:10 three.txt
[Code]....
How do I add root permissions to my user account?
I want full permissions for all computers in my house, without having to get up and go to the other room and change permissions for the file, then go back to the other room again.
I just created a partition, as THIS user, THIS machine, rebooted, and cannot create a folder on the partition I just created. UGH. No more of this stuff...
How do I add root permissions to my user account?
I want full permissions for all computers in my house, without having to get up and go to the other room and change permissions for the file, folder, drive, directory, computer, etc., then go back to the other room again.
I just created a partition, as THIS user, THIS machine, rebooted, and cannot create a folder on the partition I just created. UGH. No more of this stuff... I guess at the very least, I'll still have to log onto each machine for this?
How does one train a digital camera and USB stick to accept user access? Basically, this involves transferring photos from my camera to my machine, sorting and then moving favourites to the USB stick. Or moving selections that others have sent me to the USB stick. I am constantly changing ownership and permissions and it's driving me nuts. How can I send anything to a USB stick as a user?
View 10 Replies View RelatedI just wanted to set some file permissions right. As root:
Code:
# chown -R kikinovak:users /home/kikinovak/Documents
But all I get is a series of "Operation not permitted" errors. What's going on here? I tried this:
Code:
# find /home/kikinovak/Documents -type d -exec chmod 0755 {} ;
... with the same strange errors.
Okay so my iPod auto mounts correctly to /media/IPOD (out of the box). But the permissions are set to root leaving me with no write permissions for syncing. Obviously it works if I sudo rhythmbox and then sync, but it's too much of a hassle and not very optimal (having to re-add the songs you want to sync etc).
So...How do I make my iPod mount with permissions allowing me to read & write? Previously (in 8.10 Intrepid Ibex) it used to auto mount with correct permissions.
Some info that might be worth brining up: This all started after I got my iPod back from Apple Store for repairs. I noticed they had updated the firmware and formated it to HFS+, I told them I wanted it changed to FAT32 and got it changed rather quickly. Is it possible they f'd something up when formatting? If so, how do I correct it?
I just installed Fedora and had what appeared to be 2 panels showing so clicked on one 2 hide it, now I can't see anything on the other panel. If I move my mouse over the panel I see:
my name
the date
A note pad which disappears when I move the mouse over it and thats it. Sometimes when I point my mouse at them they disappear as well. How can I get my panel back? I thought maybe adding an application to the desktop to open a terminal session would be a good way to start, but i don't know where or what the command is for this. (I did mange to set one up so I could start Firefox). If I Open a terminal session then what do I do to get my panel back ?
If I use the GUI File Manager I ofter get stuck because I need root permissions to write or delete some file or directory. I realize I can drop down to Terminal and do either a sudo or change the permissions of a particular file, but these are several extra steps. Is there a way I can perform root actions on files using File Manager/Browser? Or is there an alternative file manager program I can explore that is more flexible? I am currently using Debian 6.01a installed from the Live CD, Nautilus 2.30.1.
View 14 Replies View RelatedI recently got a new external drive and backed all my files up on the new external: movies, music, docs, etc. Now all my files have permission rights to the root only. I was able to change this by open up nautilis from a terminal in root and change the permission on the whole drive to my current user so I can access the files, copy & delete the files. I wanted to change some music file information in Kynamo this morning and was not able to since all the individual files still belong to the root. How can I change this permission issue without having to change each individual file?
View 8 Replies View RelatedI installed ubuntu on my MacBook Pro, and now I get the infamous "still waiting for root device" when booting mac os x. I couldn't find any solutions that worked (macbook pros don't have a BIOS, or any drives that are easily removable). Anyway, so I have ubuntu working, and I need some files from OS X before I would consider reinstalling, etc. So I mounted the drive, went to users, etc. and it says that "I don't have the permissions necessary to view the contents of ****".
I did chmod 777 /media/os x/Users/* but that led to "Could not access: No such file or directory" (there's a space between os and x, I think it counts it as two commands or something and I can't rename the drive). Any way to give myself the permissions to access my files, or maybe just to copy over the whole hard drive to my main computer, or maybe somehow solve the "still waiting for root device".
I need to change the config in a folder and can not due to it being owned by root. How do I change the permissions.
Folder = /etc/stunnel/
file = /etc/stunnel/stunnel.conf
Is there a way to revert to default permissions using chmod, for root filesystem? As root I accidentally chmod'd / to 755, luckily this is a dev server and not production so its not critical to fix for me, just wondering though....
View 2 Replies View Related