Old habits die hard...I wanted to run a DOS program and the most expedient way was to copy it to a bootable floppy. Problem one, floppy isn't mounted by default. Ok, so I mounted it, then attempted the copy. The copy failed almost immediately with an error message. I rebooted into ubuntu, did the same thing, and it worked.
View 2 Replies
creating a bootable floppy from a bootable floppy image on a NON Linux machine I am trying to install dsl (damnsmallLinux) on one of my old Compaq 2000 Deskpro machine having 256RAM and 2 GB hardisk. (which I hope to increase to 8 or 10 GB ...can I use a larger disk capacity??) I have downloaded the floppy bootable image from the website using a machine a fedora OS machine that does not have a floppy drive. I have even converted the image file to an iso file. I can copy this image file or iso file to the Compaq machine but how do I use it as a bootable floppy? OR how do I create a bootable floppy disk from this image?
View 6 Replies View Relatedi have been doing a house clearance and come across an old laptop nothing special but its old running windows 95 i think any way i have used dsl b4 as a bak up incase my pc went dawn haw do i get rid of windows and run dsl on this laptop as it only has a floppy drive and a 2.5 gig hard drive its a relik i know this but instead of throwing it away i thout that putting dsl on it i could make a web browser out of it just for fun is it possable to make a bootable floppy to run the new os on the laptop.
View 5 Replies View RelatedHow can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
View 5 Replies View RelatedIf I dd copy a bootable usb drive to an iso will the iso be bootable?
I haven't tried it yet, but i'm going to. Heres the situation and tell me if I'm crazy.
I have several bootable CDs I use at work to do different things, so I went ahead and made a multi-boot usb stick with the isos on them and everything is golden. When i need something else, I am able to slap the ISO on the usb stick, edit the menu.lst and I'm good to go.
The problem is, for some of our equipment I have a bootable USB stick that I have to use. I tried copying the files on the bootable USB to my multi-boot usb and setup grub to boot it (which admittedly I'm no expert at), but have had no luck.
So now I'm thinking, I'll use dd to copy the bootable USB stick to an iso (using bs=2048) and then do my normal setup with an ISO and maybe it will work.
I have a box that can not boot from USB, yet it can boot from floppy - how can I save the bootloader on a floppy and make it boot from USB?
View 1 Replies View RelatedFor old machines, is this bootmanager plop floppy disk exists? [URL]
View 1 Replies View RelatedNothing is working,[URL] My bootable pendrive is not seen by grub. The tab in grub, e, gives my 3 partitions only
[URL]
I'm looking for a way to make a bootable floppy that has drdflash.img, my flash utility and my bios file on it for a bios recovery disk. This is on a board that has a failed bios, so everything is pretty much dead (except for the humble floppy drive). I don't have a screen to work with so this floppy needs to be able to run the utility and automatically flash the chip for me. I've heard this is possible, but am unable to find clear instructions on how to do any of this. I know the basics of it is to copy the bios file and flash utility to a floppy along with a bootdisk that will run these things (sometimes the .bat file needs to be modified in order to do this automatically). So I've downloaded drdflash but it came as a .img and I don't think it can be 'just' copied to disk. I came across the 'dd' command but have also heard its nicknamed 'data destroyer' or words to that effect.
View 4 Replies View RelatedIs there something weird about the FLOPPY DRIVE on F12? Nothing associated with it works & I can't get an icon for it. Also the FLOPPY FORMATTER no longer works. (mine is an internal drive)- I had some really miner quirks with it in 10 but it worked. I had some workaround launchers that I used until an upgrade semi-fixed it. (It would give a false error that it couldn't run but did. I just ignored it.)
I tried to edit FSTAB to cure a problem of my BACKUP drive showing up twice*** so while I was in there I added the stuff for the floppy & it still doesn't work. If I try to mount it manually, I get the error that /dev/fd0 doesn't exist.I tried to find some info on it & it SEEMS that there MAY be a bug but I'm not sure as the info is a bit confusing as to just what version & such they are talking about. And there was also the problem that all the stuff seemed to be OLD or not related to my problem.I why I quite hacking at my system, is that all my workaround launchers & the formatter say that there are GNOME things missing & they can't run. So I figure that there is something missing or screwy already & that I'd better ask BEFORE I make things worse or actually break something.With the fact that floppies are about gone, it's getting to be not that big of a deal but I still find myself having to use them for repair purposes (albeit, not as much) & it gets to be a bit of a pain to fire up M$ just to do something like this.
*** It appears that the one in FSTAB was the one I needed, so where would the OTHER one be so I can get rid of it? Or at least make it auto mount.
I am trying to make small kernel. I have written many programs and produce many .bin and .o files but what I want that to load every file from a specific location in specific sectors but don't know how to do that in linux , in dos same can be done by debug command.If It is not possible to achieve the specific location criterion please tell me how can I just copy many files serially to a floppy image.I have another question that if files are copied in floppy. How could I know in which sector the file has been loaded in floppy so that I can retrieve them by BIOS interrupt INT13.
View 7 Replies View RelatedI cannot copy files to a floppy disk because access denied.
View 9 Replies View RelatedMy system has a 3-1/2 floppy drive. I do not know how to open it to copy files to a CD. My system knows itis there since booting with a data floppy gives a non system disk error. nce in Ubuntu, the floppy drive does not appear in "places computer".ince I am completely new to this system, I do not know how to proceed
View 1 Replies View RelatedOS: Windows XP
Virtual Machine: Bochs-2.4.5
I want to learn some details about linux booting, so I begin writing a small boot program myself. Yesterday, I was writing a small boot program and planned to use it boot a Bochs virtual machine. The boot program is written in assembly language and compiled with nasm.I use bxiamge.exe in Bochs and create an floppy image called boot.img and configure the Bochs virtual host to boot from this floppy image. My question is how to write the compiled boot.bin program into the floppy image(boot.img)?
I downloaded the Fedora Live USB creator and the program consistently fails to load properly onto the flash drive. I have also downloaded the DVD iso program from this site and get only errors when trying to boot with an ISO burner? I am attempting to load the program on Sun Virtual Box, which is like VMare's Workstation, and the prompt consistently reads error when attempting to install. Also the progress bar on the Live USB loader never stops even after it the cmd prompt says it is complete.
View 1 Replies View Relatedi want to copy an ubuntu system from one computer to another using netcat / tar. What directories should i exclude? also how do i make the new copy bootable?
View 1 Replies View RelatedIs there anything like burning rom from nero or roxio cd/dvd copier. Do you know of any dvd copying program? like without making the image and then burning with just one process just copy the disc sorta program like roxio dvd copier? I wanted to make copies of movies I made a dvd of but aside from image burn which is a hassle to make the image first. is there something for burning on the fly or dvd/cd copying? infrarecorder and cdburnerxp do not work for me at all.
View 3 Replies View RelatedI would like to understand the following:
I have a Debian installation CD that I can boot from. Now I copied that to an USB-stick using dd
dd if=/dev/sr0 of=/dev/sdc bs=1M
The CD-image should contain a boot-sector and everything else that is needed for booting, yet the USB stick does not boot.
What am I missing - why does the stick not boot?
PS: I am not interested in tips on how to create a bootable stick, I only want to understand why the above method does not work.
I've done an image according to:
[URL]
then I've copied it using:
Code:
# fdisk -l
Disk /dev/hda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1145fa35
[code]....
I would like to copy few myDSL extensions/plugins to dsl.isowiki says: "When a new version of DSL comes out, just copy your additional applications to the root directory of the CD-ROM. There is no more need to redo a custom remaster to get your favorite applications on the live CD -- no more time consuming uncompressing, chroot'ing process, or accidentally making coasters"."How to copy myDSL packages to .iso so that its still bootable afterwards?
View 2 Replies View RelatedIve installed and have up and perfect a copy of ubuntu, thing is i need windows for recording and xna, i want to make a installer from usb as i havent one cd or dvd i can use for installing and all the quick fixes seem to be either in linux to make a linux usb installer, in windows to make a linux usb installer, or windows to make a windows installer, but i cant seem to find one for linux to make a windows installer, as in i would like a linux program to create a bootable usb of windows of a iso i already have.
View 4 Replies View RelatedI have two HDDs in computer, one with ntfs and windows on it and second with btrfs. I want to get data on that btrfs disk. I boot with bootable USB stick with ubuntu on it but I found out that I cannot copy anzthing. I dont have permissions. How to change that. I am logged in as nobody here in USB stick, and files are probably locked as mz previous username when I create them.
View 1 Replies View RelatedThey filled up the hdd and need more space. I first considered just adding a slave drive, but thought it might be better just to copy all of the content from the old drive to the new drive. Then, make the new drive as the master and the old as a backed up copy slave drive.
View 14 Replies View RelatedI have a bootable Linux compact flash card and want to copy it to an SD card. What would be the easiest way to do this?
View 2 Replies View RelatedI have a 16GB Ubuntu Webserver running on a Transcend SMART CF chip (Yes I know all the reasons not to). I want to move that entire system (OS, Files and structure) to an external bootable HD that will probably be closer to 100GB. What's the easiest way to do this and have it be plug and play. By which I mean I can then plug the drive into a new system and boot it up just as it was running on the old system.
View 1 Replies View RelatedHow to copy bootable USB stick including MBR partition table? I have Debian Lenny installed.
View 1 Replies View Relatedcopy a compact flash card with a form of Linux on it (Found out it was custom version based on Fedora Core 3). The flaky USB card reader seems to have hosed the flash card, it shows up with unknown volume after ejecting the card and reinserting it. My troubleshooting: I have Ubuntu on a flash drive that I used to start all this to read the flash card.
- I tried Disk Utility to reformat the card as Master Boot Record and the volume as ext3 with flag set to Bootable and copied the files using cp in command line.
- I tried ISO Master & mkisofs to make an ISO that the USB thumb drive tools can use, but it wouldn't copy all the files. Looks like symbolic links either were ignored or couldn't find the source file with -f.
- I learned that I might need a boot partition with a boot image, which I think I have in initrd-2.6.14.7img, but I don't know how to do that. Do I also need a swap partition?
My updated goal: using the files from the flash card, make a bootable compact flash card with Fedora Core 3.
I am trying to write a floppy boot image to my floppy drive (as root):
Code:
dd if=boot.img of=/dev/fd0
dd: opening `/dev/fd0': Read-only file system
[code]....
I am having a Promise TX4650 RAID controller & trying to create a driver floppy for installing the drivers. Also am using RHEL 5, I can create the driver floppy, but when I type "mount /dev/fd0 /media/floppy" I get error: "mount: mount point /media/floppy does not exist".Can I get the files in a format other than the ext2 floppy image, so that we do not need to use a floppy drive?There is a readme file inside the driver archive & you can use that as a reference.
View 2 Replies View Relatederror message:Unable to scan Floppy Drive for media changes Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
View 1 Replies View Related
