Now that the xorg.conf file seems to be a thing of the past, where do I put my serverlayout commands etc in order to get the serial touchscreen working? It responds to touchcal but doesn't work in normal use, so I presume it just needs X to be forced into loading it at startup.
View 2 RepliesI am hoping to be able to get an old serial-touchscreen to work with a usb/serial adapter. I had this touchscreen working some years ago on different hardware. I would like to hook it to the machine I am setting up as a multimedia host with mythtv among other things.
Following the instructions I left behind when I got this to work way back when does not work. See [URL] ....
This info is a work around to get the xserver to see the touchscreen. [URL] ....
I do know that the touchscreen works as I am able to get garbage on the screen as in the first part of my howto. But I have not had any success getting xorg to see it. I wish I had posted a copy of the xorg.conf at the time, but......
There is an issue with the current xserver in testing that I am hoping the next update (in unstable) will fix when it gets pushed to testing. That is that Code: Select all# X -configure fails with a segfault. So I am not able to generate the xorg.conf needed to get it to work. I was going to post a bugreport, that is when I found out there is an update in unstable, so I am waiting for it to get pushed at the moment.
Anyway I am hoping that I can link /dev/ttyUSB0 to /dev/tty0 and get it to work. I would like some kind of guess as to my chances of success before I go to all the work of getting the monitor hooked to the host.
I have a touchscreen (DELL model)which is working with windows xp (with windows drivers for touchscreen installed). but i want to use mandriva 2008 on the touchscreen, which requires drivers of mandriva 2008 only. I have been trying very hard but in vain.
View 3 Replies View RelatedHad it working in Ubuntu and now Ive switched to openSUSE and loving it! Much better than Ubuntu. But I cant get the touchscreen working. Please help...Ive tried to get it working but assume I have done nothing please. Im semi-intelligent when it comes to linux but most of my experience has come from Ubuntu.Im kernel 2.6.34-12 and using openSUSE 11.3 (32 bit)
View 3 Replies View RelatedHow to get a older crt touchscreen working. I need it to work for a handicapped child. When I check the device it seems slackware detects it as a mac emulation mouse and I installed egalaxy drivers. It seems something is right, when I touch the screen the cursor goes to the right top corner and moves a bit when touching the screen.
View 5 Replies View RelatedI have been reading data(non-canonical input) off a serial port in a loop. The device I am connected to sends the data in a bursty manner and I have to read using the loop. The device sends some data when initially powered on which I am supposed to read. I can then send "commands" to the device over the serial port. The "command" is supposed to be "debug d 35 5 0"After I send the command there is some data that is sent back by the device to show that the command was successful. This command should elicit the right response from the device but it responds correctly some times while other times it does not. (when I try to write the consecutive commands) If I send two consecutive commands after reading the initial data and the command feedback I face some problems.
View 10 Replies View Relatedafter installing the OS my mouse was not working. After searching in net for a day, I made it working. Shall give the details hereIf its a repeat thread please ignore it.1. Go to Terminal.2. Login as root.3. su -c 'yum install -y system-config-display'This step will take some 2 to 5 mins 4. su -c 'system-config-display --reconfig'After Fedora 9/10, the xorg.conf is not available and it uses HAL to detect the hardwares. The above steps create the config file.
5. su -c 'cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak'
back up
6. su - -c 'gedit /etc/X11/xorg.conf'
[code]....
I picked up as Dynex usb2serial converter to use with my cisco router/switch. The dongle works fine if plugged into a windows box & puTTy, but I cannot get it to work with Fedora 14. When I try to use cute, mini or command line it tells me it cannot open the connection. Here is the output from lsusb and dmesg. susb output:
[code]....
I've just had to change the MOBO and trying to get the serial port working, I see from previous posts there are some problems lurking in the past.
setserial -g /dev/ttyS*
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3
but I'm not seeing anything from a GPS receiver in NMEA at 4800 no par 1 stp I know that was working about a year ago. I think udev was not helping ,as I was getting permission denied to the com port, I added myself to group dialout. and no message on startup now
I need to be able to talk to a piece of kit with 9600 baud and nothing. I have win32 s/w to drive it , but it falls over in wine. My laptop still has win7 on it in a tiny partition but no 9w d connector and I'm waiting for a USB converter cable. Too many variables ! I'd forgotten all the hassle of having to install drivers just to get basic things running. But as the stupid thing couldn't manage using the driver for my NIC, I was stuck with hyper-terminal, and nothing from the GPS board @4800 or another piece of equipment running at 9600. I suspect the com port on the new mobo doesn't wan to play
I am trying openSUSE 11.3(KDE desktop) for the first time (also my first time with a linux OS). But i am trying to install the EgalaxTouch driver to get my touchscreen working. I have tried all the things from this topic: openSUSE 11.3 and eGalax TouchScreen but everytime i try to run the install.sh i get these errors no mather if i am directly logged in as root or using sudo in my command line:
I am busy from monday installing all kind of touchscreen drivers but they all won't install propperly (just like the original drivers they need the Xfree86-devel but i can't find it for openSUSE).
I have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
how can I disable the touchscreen tapping on F12?
View 2 Replies View RelatedDoes Fedora supports Touchscreen computers? I am planning buy a new desktop computer and there are several models that come with touchscreen, I don't really care about this feature , I just want to know if Fedora can operates under a touchscreen system. If Fedora doesn't support touchscreen systems, Is there any plan to integrate this option in a near future?
View 1 Replies View RelatedI install Fedora 12 in my EEEpc with a eGalax touchscheen but the touchscreen does not work. It seem to be detected at some point, but when I touch it, nothing happen. Here is the lshal output:
Is it because hal have been deprecated? If so, will xorg.conf restart to work or it will be rejected in favor of hal like on Ubuntu? The touchscreen is autodetected by other distributions.
Code:
udi = '/org/freedesktop/Hal/devices/usb_device_eef_1_noserial'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
[Code]....
I just switched from FC10 to FC12, and much to my dismay, the touchscreen no longer works. I wasn't able to find a solution on the web, hopefully some gentle soul will answer my problem. The hardware is recognised correctly, because
Code:
hexdump /dev/hidraw0
gives an output when I over the stylus over the screen.
Note: I used hexdump because I couldn't find the wacdump utility anymore. Has it disappeared?
I played with HAL rules so that the appropriate wacom driver is loaded for the tablet. I modified /etc/hal/fdi/policy/10-synaptics.fdi, taken from /usr/share/hal/fdi/policy/20thirdparty/10-synaptics.fdi, as follow (to avoid trying to load Synaptics driver for the touchpad feature of the tablet):
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
[Code]....
I have RHEL 5.3 installed on HP ProLiant DL320 Generation 5 but i cant get serial port workingdmesg | grep ttyserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
setserial -g /dev/ttyS[0123]
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
[code]...
I'm new to ubuntu. I'm trying to get my US Robotics external serial modem working so I can use Ubuntu.
I copied
wvdial & dependencies:
libuniconf4.6
libwvstreams4.6-extras
libwvstreams4.6-base
to a flash drive.
How do I get them to /var/cache/apt/archives? I tried to copy and drag&drop wont work.
I am using linux 2.6.20 from ltib-mpc8313erdb-20070824 on my development board having MPC8313 powerpc processor. Whenever I plug-in the USB device, the serial port starts mal-functioning. It does not receive all the packets.
View 1 Replies View RelatedI have installed Suse Linux Enterprise Server 11 onto the box that I am using as a server. Connected to the "server" is a Windows Vista PC.Beyond installing the O/S with all the options I need - I am stuck. The Windows PC will not connect to the internet whereas the Linux server will.What do I need to setup and in what order to get the pc working on the internet?
The path that I think I need to take is to disable dhcp on the broadband router and setup the server as dhcp (how and what); setup the rules in the firewall (how and what rules?) and setup dns and dhcp (how and what?)
I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5).I have /sbin/agetty -L 9600 ttyS0
in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control.I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but
cat < /dev/ttyS0. just prints out weird characters from what I type.
On my CentOS 5.2 install I've installed a dual-port serial card based on the NetMOS 9835 chipset. I've followed the serial instructions, but everything they tell me to do is already done - see setserial outputs below. I've compared these values to the lspci output (below, NetMos card is at the bottom of the output) for the card and it appears right. Problem being, I can't use the serial ports. Oh and I did use search, and looked at every 9835-related article before posting this :)
[Code]....
I want (need) to reisntall my Wine in order to get working my MS Word!
MS Word suddendly started only opening texts in italics. Every word were italicized.
Then I'm trying to reinstall Wine to have it ok.
But I have put the command ...sudo remome wine... but it has been running for almost 10 minutes!
Is it normal? what else could I do?
I have a bit of a dilemma. I'm attempting to use a microcontroller to send MIDI messages over a virtual serial port. I want to (eventually) read them with Mixxx. I'm using an FTDI chip, so I get a /dev/ttyUSB0. I've tried spikenzielabs' Serial-Midi program, but it doesn't see any serial ports. NOTEMIDI looks really old and won't compile on my 10.04 LTS machine.
View 2 Replies View RelatedWe have a new machine with RedHat enterprise 5 on it. I need to connect a serial cable to the serial port and talk to another system (old alpha system) instead of using a VT connected to the alpha.Does RedHat come with anything like Keaterm/hyperterm/etc etc?
View 3 Replies View RelatedI am using a Prolific pl2303 USB<=>Serial adapter. dmesg reports everything seems ok when I plug it in (see below) but when I open the ttyUSB0 port in minicom, it is always offline and nothing works. Also, minicom reports:
[code]....
If I plug the adapter into a different machine (Windows) everything works fine. The serial port is setup correctly (9600-8-N-1) What can I do to get this working?
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
pl2303 5-2:1.0: pl2303 converter detected
usb 5-2: pl2303 converter now attached to ttyUSB0
usb 5-2: New USB device found, idVendor=067b, idProduct=2303
[Code]....
I am using openSUSE 11.3 , 32bit.I do the appropriate setting in 'minicom' application.I have two devices 'a' giving message at debug port at 9600 baud while 'b' at 115200 baud..Both 'a' & 'b' work fine when connected to serial port of computer.'a' works well if I connect it to serial to USB adapter which is plugged into USB port of computer.In case of 'b' , the above method yields failure.Do I have to set anything for device /dev/ttyUSB0 ?
View 1 Replies View Relatedin my text file of 5 columns 2 column is in DDMMYYYY format. (ie DATE OF BIRTH). how to use sort command for its ascending order and descending order.
Is the same can be use for the date format YYYYMMDD ?
Iam newbi to SUSE, I installed java in my SUSE linux Server edition, So i want to set the path in linux,So i created .bash_profile in in /root path using touch and added the path as "JAVA_PATH". When restart my linux the above command is not working and it show unknown command "JAVA_PATH", I can't able to boot in GUI mode, I can boot only in terminal mode, How to delete the file (.bash_profile in /root) ? And how to add java path in SUSE
Note: Before all the commands are working fine
My previous experience with Ubuntu desktop (which isn't much) while in the terminal the up key allowed me to see previously entered commands, but I have freshly installed Ubuntu Server Edition and the up key is not allowing me to do so, Is there a way to get this working?
View 3 Replies View RelatedI followed this thread:[URL]...When I get to this part:sudo genprof firefox it does not work in the terminal. Is this still supported for Ubuntu 11?
Also, I installed the profiles. Is something supposed to happen now or do I need to configure them?
sudo apt-get install apparmor-profiles