Software :: RHEL 5.3 Serial Port Not Working?

Mar 8, 2010

I have RHEL 5.3 installed on HP ProLiant DL320 Generation 5 but i cant get serial port workingdmesg | grep ttyserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

setserial -g /dev/ttyS[0123]
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3

[code]...

View 8 Replies


ADVERTISEMENT

Fedora :: Change The MOBO And Trying To Get The Serial Port Working?

Apr 20, 2011

I've just had to change the MOBO and trying to get the serial port working, I see from previous posts there are some problems lurking in the past.

setserial -g /dev/ttyS*
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3

but I'm not seeing anything from a GPS receiver in NMEA at 4800 no par 1 stp I know that was working about a year ago. I think udev was not helping ,as I was getting permission denied to the com port, I added myself to group dialout. and no message on startup now

I need to be able to talk to a piece of kit with 9600 baud and nothing. I have win32 s/w to drive it , but it falls over in wine. My laptop still has win7 on it in a tiny partition but no 9w d connector and I'm waiting for a USB converter cable. Too many variables ! I'd forgotten all the hassle of having to install drivers just to get basic things running. But as the stupid thing couldn't manage using the driver for my NIC, I was stuck with hyper-terminal, and nothing from the GPS board @4800 or another piece of equipment running at 9600. I suspect the com port on the new mobo doesn't wan to play

View 2 Replies View Related

Software :: USB Stops Serial Port From Working Correctly?

May 13, 2010

I am using linux 2.6.20 from ltib-mpc8313erdb-20070824 on my development board having MPC8313 powerpc processor. Whenever I plug-in the USB device, the serial port starts mal-functioning. It does not receive all the packets.

View 1 Replies View Related

General :: Windows With Putty Via USB Serial Cable To Serial Port - Output Ok, Input Isn't?

Jan 13, 2010

I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5).I have /sbin/agetty -L 9600 ttyS0

in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control.I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but

cat < /dev/ttyS0. just prints out weird characters from what I type.

View 3 Replies View Related

Software :: Connect A Serial Cable To The Serial Port?

Mar 23, 2010

We have a new machine with RedHat enterprise 5 on it. I need to connect a serial cable to the serial port and talk to another system (old alpha system) instead of using a VT connected to the alpha.Does RedHat come with anything like Keaterm/hyperterm/etc etc?

View 3 Replies View Related

OpenSUSE :: Set RxtxSerial - Java App Has Access To A Serial Port (via SiLabs CP210x Driver, Port /dev/ttyUSB0)

May 10, 2010

I'm trying to set rxtxSerial to work so a Java app has access to a serial port (via SiLabs CP210x driver, port /dev/ttyUSB0). When I use update-alternatives --config java, there are 3 alternatives which provide `java'. I have tried openJDK and Sun. Both fail but with completely different messages.

[Code].....

View 9 Replies View Related

Software :: Identify The Status Of Serial Port ("Port Already Opened") From A C Program?

Feb 5, 2010

I am writing some application in C, which will access a serial port device (RS232). My application is working good. But if any other application is already opened the port, I couldn't able to identify that. In windows VB program, while accessing comport through mscomm control, i am receiving an error as "Port Already Opened". But in Linux environment, through C program how can i get that? I am accessing comport 1 as follows

fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY | O_SYNC);

View 3 Replies View Related

Fedora Servers :: Serial Port On Fed 12

Mar 25, 2010

Can anyone one give me some pointers please, for talking to a serial port, if I use cutecom it always returns "could not open /dev /tty0 or 1 or 3 or 4, even tried ttys0 etc

View 7 Replies View Related

Fedora :: How To Connect To Serial Port?

Jan 19, 2011

i would like to connect to my cisco via a console port and i dont konw how

View 13 Replies View Related

General :: How To Know Which /dev/ttyS* Is My Serial Port

Apr 14, 2010

I have a laptop which has only one serial port.

I went into:

How do I know which of those "ttyS" refers to my serial port?

View 2 Replies View Related

Ubuntu :: Serial Port Access On 10.04?

Apr 27, 2011

ive been looking through several online documents and forum posts but i cant get a clearcut answer on how to set up serial port acces in ubuntu 10.04 (server).

View 7 Replies View Related

Hardware :: Reading Serial Port With C?

Aug 12, 2010

I have two usb2serial adapters connected to my PC with a null modem (I am doing some testing to learn serial comm for a particular application). I am writing to /dev/ttyUSB0 a trying to read /dev/ttyUSB1. I have used screen (screen /dev/ttyUSB1 115200) and am able to see the characters being written. I am also able to read and write with Python with the following code

Code: import serial,time,sys
ser1 = serial.Serial('/dev/ttyUSB0',baudrate=115200)
ser2 = serial.Serial('/dev/ttyUSB1',timeout=2,baudrate=115200)
ser1.open()
ser2.open()

[Code]....

View 3 Replies View Related

General :: How To Get Syslog Using Serial Port?

Feb 6, 2010

How do I get syslog using serial port?

View 2 Replies View Related

Hardware :: Blind Serial Port

Jul 11, 2011

I can't communicate with and UPS (Eaton) via a serial port. The serial port is UP and have been tested under a Windows OS.I have set up the communication parameters and tried to establish a dialog with the UPS. Minicom is installed. Nothing appears ont the screen and the VT102 has an offline status. The OS is Red Hat Enterprise Linux 5 64bits.Is somebody have examples to debug the serial port ?

View 7 Replies View Related

Hardware :: Serial Port Interrupt

Jan 25, 2011

I need cause an interrupt on a serial port. If I put a single HIGH on the RX pin, will that cause one? I all ready use the 4 control lines for data.Hope I am making sense?

View 5 Replies View Related

Hardware :: Usb To Serial Port Adapter?

Apr 14, 2009

I need a to add a usb serial port adapter. Are they all basically the same? Do I need to find a Linux compatibility list before I go shopping?

View 1 Replies View Related

Networking :: How To Bridge Tcp/ip To Serial Port

Apr 27, 2010

I want to implement the following scenario :-[workstation1] <--ETHERNET-->[device 1]<--SERIAL-->[device 2]<--ETHERNET-->[workstation2]In short, a LAN over Serial link (RS-232 for instance).If there is a utility that offers such functionality, kindly give me the name, i've googled a bit, and found ser2net, but that only works with TELNETing.. i want it work like a normal LAN like file-sharing n all but over Serial.If there is no such software, then obv i have to program myself. regarding which i have more questions

View 9 Replies View Related

General :: Serial Port Programming Help

Apr 15, 2010

can we use inb() and outb() functions for serial port programming ??

View 5 Replies View Related

Software :: Addressing The Serial Port?

May 25, 2011

I'm not a developer or programmer just a user.I'm trying to install a packet radio system using Linux. The TNC is a Kantronics KPC3.The issue I'm having is the communications programs I have tried (minicom and cutecom) do not talk to the TNC. I'm using a computer that has a serial port and it is enabled in the BIOS.I have added myself to the uucp group in an effort resolve this issue.

View 6 Replies View Related

Software :: Resetting A Serial Port ?

Mar 23, 2009

I communication with different subsystems using serial port. In some subsystems after running for a while, I start getting invalid data inspite of system sending correct data. For dealing with this situation I used to
reset serial ports by closing and reopening serial port, it was doing the trick but somehow when I have implemented this in my new application, this also doesn't work.

void CPort::

The ClosePort function invokes close system call.

some other way to reset serial port in Linux? I am using RHEL 4, C++ and Qt 4.2.1 for my application development. Also I have used multithreading to implement each subsystem in a separate thread. Its strange that if A,B,C are three threads, A & B run fine together but when C is introduced B starts receiving invalid data after sometime and never recovers even after resetting the port as mentioned above.

View 4 Replies View Related

Software :: Serial Port Is Getting Hang ?

Jan 13, 2010

I dot know why my serial port(minicom) is getting hang after some time. again i have to close the terminal and i have to open an new minicom to use my serial port. I dont know why it is getting hang. Please can anuone tell me why it is happening?

View 6 Replies View Related

Programming :: C - Serial Port Won't Open?

Sep 1, 2010

I'm using C serial in a program to open and use a serial port but the port won't open for one reason or another. The program successfully runs on a different computer and when using RealTerm: Serial Capture Program, I can connect through the serial port with the same settings as I'm attempting through my c code. Anyone have any idea why it might be failing? I know this is still pretty vague, so let me know if there's other things I can tell you that might help to finding a solution

View 3 Replies View Related

CentOS 5 :: Using USB Port For Serial Terminal?

Apr 27, 2009

The /dev directory on my system shows the following entries:

/dev/tty
/dev/tty0
/dev/tty1

[code]....

View 19 Replies View Related

CentOS 5 Networking :: How To Ssh To The Serial Port On A PC

Jan 16, 2010

I would like to be able to ssh to a TCP port on my server and be directly connected to the serial port @ 115200 Null modem config. Does any body know how one can do this?

View 4 Replies View Related

Fedora :: Access To Serial Port Denied?

May 24, 2010

My program tries to open serial port on Fedora 12, and shows "Access denied" on Open Port operation. The same program runs successfully with root rights. What can I do to get COM port access as regular user?

View 2 Replies View Related

Fedora Hardware :: How To Mount Serial Port?

Sep 24, 2010

I think I need to mount a serial device, but not sure how. I looked at /etc/fstab, but cannot determine what to put in for the mount type. And, not sure what port it would be exactly... imagine either "ttyS0" or "tty0". Can someone give a newbie some guidance on how to possibly mount this device?

View 2 Replies View Related

Fedora Hardware :: Cannot Screen Serial Port?

Jun 7, 2011

have a new HP Compaq 8200 elite. I have a dual boot system. Windows 7 and Fedora 15.In Fedora I cannot seem to connect to the serial port. Could anyone help me with resolving this. I've never had issues with hardware before in Linux so this is a little new to me.

Code:
[matt@matt ~]$ dmesg | grep tty
[ 0.000000] console [tty0] enabled

[code]...

View 3 Replies View Related

OpenSUSE Hardware :: New Serial Port Added

Apr 4, 2011

I have openSuse 11.1 and have just added a new serial port card. Do I need to do something to get the card going? My application doesn't seem to be getting data from the serial card. How would I test status. Do I use setserial .

View 9 Replies View Related

Ubuntu :: How To Login On Gnome/X Via Serial Port

Jan 16, 2010

I'm writing a point-of-sale application in Perl/Tk, to run on Ubuntu. For cashier accounts, I plan to just use normal Linux accounts. Cashier login will be done by scanning a badge with a barcode ID on it. Our barcode scanners are older serial-port types. Thus, I'd like to login to the X (Gnome) desktop, yet read the username (and password) via a serial port such as /dev/ttyS0.

View 3 Replies View Related

Ubuntu :: Unable To Read The Serial Port

May 23, 2010

I am using a F232 USB to serial adapter for connecting my wireless modem to my laptop and I wrote a simple C code for reading data received by the modem transmitted by another modem installed on my target device.The problem is my code is simply giving 0.00000 (float data) output .When I use the same code with my desktop its running fine and I am getting relevant data.What may be the problem? I even changed the permission for my /dev/ttyUSB0 I am using Ubuntu 10.04 on both my laptop and desktop

below is my code

Code:

#include <stdlib.h>
#include <math.h>
#include <errno.h> /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */

[code]....

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved