Software :: Connect A Serial Cable To The Serial Port?
Mar 23, 2010
We have a new machine with RedHat enterprise 5 on it. I need to connect a serial cable to the serial port and talk to another system (old alpha system) instead of using a VT connected to the alpha.Does RedHat come with anything like Keaterm/hyperterm/etc etc?
I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5).I have /sbin/agetty -L 9600 ttyS0
in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control.I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but
cat < /dev/ttyS0. just prints out weird characters from what I type.
I have to connect from my linux client laptop to SPARC machine by using roll-over cable and RJ45 interface on the server. On windows I always used Tera Term but don't know how to accomplish this task from linux laptop.
Is there some kind of app like TeraTerm on linux too ?
i got this old UPS from compaq long back and installed it with a new battery. Thing is i need to connect it to my PC using this serial cable. But my mobo doest have 1. So i bought a COM port cable converter to serial and have attached the UPS through it.
Now after all this done, my PC wont detect any UPS.. i dont know whether its detecting it or not...
here is the output of dmesg|grep tty
Code: stoned_420@stoners ~ $ dmesg|grep tty [ 0.000000] console [tty0] enabled [ 0.852459] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.852698] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
So is my UPS being detected :-/ If not how can i know?
Am attaching pics of what all i have.. save my UPS from draining off when i'm not at home and theres a power failure
I bought a USB Adapter (Trendnet TU-S9) so that I could connect a old camera that connects via a serial port to my newer pc that has no serial port. The problem is that the adapter,to my surprise,requires drivers or some software to work.Windows, of course, and Mac drivers came with it on a disc but.... nothing for Linux. I am running Ubuntu 11.04.
a few day ago i have checked my application and make rs232 cable converter to communicated it. And not detected, why? FYI, this is my lsusb command, but in my dmesg, was not found. check this out, (usualy there is another rows, just like ".....converted to ttyUSB0....")
I have a vista computer that is connected to a router via a ethernet cord. The router is connected to the internet.I have a computer installed with Debian that does not have a ethernet port in the back of it. Is there a way that I could connect my Debian computer to the internet through my vista?
On my CentOS 5.2 install I've installed a dual-port serial card based on the NetMOS 9835 chipset. I've followed the serial instructions, but everything they tell me to do is already done - see setserial outputs below. I've compared these values to the lspci output (below, NetMos card is at the bottom of the output) for the card and it appears right. Problem being, I can't use the serial ports. Oh and I did use search, and looked at every 9835-related article before posting this :)
I've been reading too much and understanding too little. What I have: Lucid laptop & desktop. Both have ethernet > hub > internet. What I want: connect them directly by the serial ports so the laptop can access the desktop's drives, and the desktop can be retired from the internet. I've got an old DB-25 null-modem, last used for multiplayer Doom. The laptop's dock has DB-9, so the connections is desktop > null-modem > Belkin DB-25 - DB-9 cable > laptop.
I had hoped this post would get me somewhere:[URL].. No such luck. When I ping 'grin.local', the connection is through the internet. If I disconnect the hub, i cannot ping.
Dunno if there's something more I should do to enable serial connection in Lucid, or if my null-modem is no longer good. I'm also rather curious how "grin.local" manages a connection through my ISP's system. These are DHCP. Shouldn't that have required the full numerical IP?
(It's nothing to do with the hub. Checked that by connecting a third box to the hub. My ISP only hands out two IP. I couldn't ping the third box.)
I am hoping to be able to get an old serial-touchscreen to work with a usb/serial adapter. I had this touchscreen working some years ago on different hardware. I would like to hook it to the machine I am setting up as a multimedia host with mythtv among other things.
Following the instructions I left behind when I got this to work way back when does not work. See [URL] ....
This info is a work around to get the xserver to see the touchscreen. [URL] ....
I do know that the touchscreen works as I am able to get garbage on the screen as in the first part of my howto. But I have not had any success getting xorg to see it. I wish I had posted a copy of the xorg.conf at the time, but......
There is an issue with the current xserver in testing that I am hoping the next update (in unstable) will fix when it gets pushed to testing. That is that Code: Select all# X -configure fails with a segfault. So I am not able to generate the xorg.conf needed to get it to work. I was going to post a bugreport, that is when I found out there is an update in unstable, so I am waiting for it to get pushed at the moment.
Anyway I am hoping that I can link /dev/ttyUSB0 to /dev/tty0 and get it to work. I would like some kind of guess as to my chances of success before I go to all the work of getting the monitor hooked to the host.
I have a bit of a dilemma. I'm attempting to use a microcontroller to send MIDI messages over a virtual serial port. I want to (eventually) read them with Mixxx. I'm using an FTDI chip, so I get a /dev/ttyUSB0. I've tried spikenzielabs' Serial-Midi program, but it doesn't see any serial ports. NOTEMIDI looks really old and won't compile on my 10.04 LTS machine.
I'm trying to set rxtxSerial to work so a Java app has access to a serial port (via SiLabs CP210x driver, port /dev/ttyUSB0). When I use update-alternatives --config java, there are 3 alternatives which provide `java'. I have tried openJDK and Sun. Both fail but with completely different messages.
Right now I am using some software to emulate a null modem serial cable on my Windows computer connected to itself. For development purposes I need to have a null modem connection to a linux computer from a windows host. Is there any method of doing this virtually?
Can anyone one give me some pointers please, for talking to a serial port, if I use cutecom it always returns "could not open /dev /tty0 or 1 or 3 or 4, even tried ttys0 etc
ive been looking through several online documents and forum posts but i cant get a clearcut answer on how to set up serial port acces in ubuntu 10.04 (server).
I have two usb2serial adapters connected to my PC with a null modem (I am doing some testing to learn serial comm for a particular application). I am writing to /dev/ttyUSB0 a trying to read /dev/ttyUSB1. I have used screen (screen /dev/ttyUSB1 115200) and am able to see the characters being written. I am also able to read and write with Python with the following code
I can't communicate with and UPS (Eaton) via a serial port. The serial port is UP and have been tested under a Windows OS.I have set up the communication parameters and tried to establish a dialog with the UPS. Minicom is installed. Nothing appears ont the screen and the VT102 has an offline status. The OS is Red Hat Enterprise Linux 5 64bits.Is somebody have examples to debug the serial port ?
I need cause an interrupt on a serial port. If I put a single HIGH on the RX pin, will that cause one? I all ready use the 4 control lines for data.Hope I am making sense?
I want to implement the following scenario :-[workstation1] <--ETHERNET-->[device 1]<--SERIAL-->[device 2]<--ETHERNET-->[workstation2]In short, a LAN over Serial link (RS-232 for instance).If there is a utility that offers such functionality, kindly give me the name, i've googled a bit, and found ser2net, but that only works with TELNETing.. i want it work like a normal LAN like file-sharing n all but over Serial.If there is no such software, then obv i have to program myself. regarding which i have more questions
I'm not a developer or programmer just a user.I'm trying to install a packet radio system using Linux. The TNC is a Kantronics KPC3.The issue I'm having is the communications programs I have tried (minicom and cutecom) do not talk to the TNC. I'm using a computer that has a serial port and it is enabled in the BIOS.I have added myself to the uucp group in an effort resolve this issue.
I communication with different subsystems using serial port. In some subsystems after running for a while, I start getting invalid data inspite of system sending correct data. For dealing with this situation I used to reset serial ports by closing and reopening serial port, it was doing the trick but somehow when I have implemented this in my new application, this also doesn't work.
void CPort::
The ClosePort function invokes close system call.
some other way to reset serial port in Linux? I am using RHEL 4, C++ and Qt 4.2.1 for my application development. Also I have used multithreading to implement each subsystem in a separate thread. Its strange that if A,B,C are three threads, A & B run fine together but when C is introduced B starts receiving invalid data after sometime and never recovers even after resetting the port as mentioned above.
I dot know why my serial port(minicom) is getting hang after some time. again i have to close the terminal and i have to open an new minicom to use my serial port. I dont know why it is getting hang. Please can anuone tell me why it is happening?
I'm using C serial in a program to open and use a serial port but the port won't open for one reason or another. The program successfully runs on a different computer and when using RealTerm: Serial Capture Program, I can connect through the serial port with the same settings as I'm attempting through my c code. Anyone have any idea why it might be failing? I know this is still pretty vague, so let me know if there's other things I can tell you that might help to finding a solution
I would like to be able to ssh to a TCP port on my server and be directly connected to the serial port @ 115200 Null modem config. Does any body know how one can do this?