Fedora Hardware :: WD Caviar Blue 500 GB SATA Hard Drives?
Mar 31, 2011My new WD Caviar Blue 500 GB SATA 6 Gb/s Hard Drive (WD5000AAKX) is not being detected on Fedora 14 live.
View 8 Replies
ADVERTISEMENT
General :: Merge Four 230GB SATA Hard Drives On An Already Running Fedora 9 OS?
Dec 18, 2010I recently finished installing Fedora 9 on a Prolient ML 330 G6 Server, but i configured the SATA hard drives to be viewed as four seperate hard drives. I was asked to merge the drives to be seen as one 800GB hard drive, my biggest fear is that we had set up Samba to share folders between fedora 9 giving specific users access to specific files saved on the Prolient server, will those settings be lost.And could you call that a File Server or do you have to enter any more settings And also if anyone could point me to a tutorial on Logical Volume Management and Raid specifically for fedora 9
View 10 Replies View RelatedUbuntu :: WD Caviar Green Drives Kernel?
Jan 1, 2011I have 4xWD20EARS which are the new 4k sector sata drives made by Western Digital. I am running an old 500GB WD sata drive as my boot volume and these 4 drives will hopefully be in a software raid 5. I am getting a kernel message during heavy disk access on each of the new drives:
Code:
Jan 1 15:05:48 mediaserver kernel: [ 307.566686] ata1: hard resetting link
Jan 1 15:05:49 mediaserver kernel: [ 307.921296] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 1 15:05:49 mediaserver kernel: [ 307.929302] ata1.00: configured for UDMA/133
Jan 1 15:05:49 mediaserver kernel: [ 307.929344] ata1: EH complete
Jan 1 15:05:49 mediaserver kernel: [ 308.104397] ata1: hard resetting link
[Code]...
Ubuntu :: How To Spin Down Sata Hard Drives
Aug 13, 2011(Ubuntu 10.10) I went to System->Preferences->Power Management and checked spin down hard disks whet possible. I have two internal sata hard drives. One is for the OS and the other is for media. Neither Hard disk is being spun down. Is there something else I need to do?
View 5 Replies View RelatedGeneral :: 3TB SATA Hard Drives Will Work Into An Old System
May 14, 2011I have a 3 year old PC with 4 internal SATA ports. My old SATA hard drives, all smaller than 2TB, work fine. If I buy a 3TB SATA hard drive, will it work in Linux? Will Linux with GRUB be able boot from such a hard drive without a BIOS upgrade? With a BIOS upgrade? It's fine for me to upgrade my Linux to the newest kernel.
View 1 Replies View RelatedUbuntu Installation :: Two Hard Drives Vista On SATA Empty IDE
Jul 21, 2010I have two drives one is a 500 gig SATA drive running Vista SP 2 now the other Maxtor 160 Gig drive is empty. I would like to install Ubuntu on that drive. Now I just though of installing from the setup however would this screw up my Vista partition ?
View 1 Replies View RelatedUbuntu :: 640GB Sata Hard Drives - Put Into A Raid 5 Configuration?
Jan 7, 2011I have three 640GB sata hard drives that I would like to put into a raid 5 configuration. I would like to opt for a software raid 5 so its hardware independent. I was trying to follow these instructions, but they seem a bit dated.
View 2 Replies View RelatedHardware :: UUID Not Resetting With USB Enclosured SATA Hard Drives?
Jan 11, 2011I have three Linksys NSLU2s each running nearly identical setups: SlugOSBE 5.3 with two USB SATA hard drives in enclosures. One partition on each drive is used for software RAID 1. The third NSLU2 which has two identical 500gb Western Digital Blue Scorpion SATA drives and two identical USB enclosures (Flexmate) is giving me issues. The second hard drive keeps getting booted from the RAID array - looking into it I noticed that, for some reason, Linux is reading both RAID partitions as having an identical UUID. I thought maybe that was the issue so I've set about trying to fix it.
SlugOSBE doesn't have tune2fs, so I removed the drives and used tune2fs to create new UUIDs for both partitions (which usually show up as /dev/sda3 and /dev/sdb3) on my Kubuntu 10.10 machine. tune2fs reports the correct new UUID under Kubuntu. But when I plug the drives back in to the NSLU2, it still shows the old UUID for both drives. I've deleted /etc/blkid.tab, but that doesn't seem to do anything.
General :: Dell Inpeirion 1545 Hard Drives Are Attached To A SATA Controller?
Jan 8, 2010I am using Dell Inspirion 1545 core 2 duo T6600, 3 gb ram,320 gb sata hddand in my bios i got 4 option (1) disable which disable sata and hdd is not detected (2) ATA where in my M$ is working(3) AHCI which mode will work. also i am using vm-ware to installed redhat linux 5.my hdd did not detected. do u need any information tell me i will post it on the same any command out put or log by which we can solve this problem.
View 1 Replies View RelatedOpenSUSE Install :: Find Hard Drives On System - Motherboard With Two SATA Controller Chips
Aug 2, 2010I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
Hardware :: Can SATA 3 (SATA III) Hard Disk Be Run On Motherboard Which Only Support SATA II
Aug 13, 2010Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies View RelatedServer :: File Server Machine To Store All Data So Being That Have Got Four Identical SATA Hard Drives?
Jan 25, 2011I've got 4 identical 1 TB drives and would like to use them in a software RAID configuration on my home server. I'm running Debian Linux using 'mdadm' utility to manage the software RAID. I don't know how much I've read is fact or dated or even false so I decided I would ask here to get help from people who know more about this than I do. This is essentially just a file server machine to store all my data so being that I've got four identical SATA hard drives, I was thinking about doing RAID level 5. I guess I'll start here and ask if that is the recommended level of RAID. I think RAID level 5 will be fine for my general server usage. My second issue is partitioning the four individual drives to get maximum performance / space from them. Basically just asking here how would you or you recommend I partition the drives? I was thinking about doing three seperate partitions per drive:
/dev/sda1 = 4 GB (swap)/dev/sda2 = 1 GB (/boot)/dev/sda3 = 995 GB (/)Now from that partition schema above, obviously all the types will be 'fd' for RAID and the partition for /boot is going to be bootable. My confusion is that I read Grub doesn't support booting from RAID 5 since Grub can't handle disk assembly. If /dev/sdx2 (sda2, sdb2, sdc2, sdd2) are partitioned for /boot (bootable), how would you guys configure this RAID to match up equally? I don't think I do a RAID level 1 on 4 identical partitions, right?
Fedora Installation :: Can't Get SATA And IDE Drives
May 4, 2009I have a 500gig SATA drive and a 320gig IDE drive installed in an HP a6700y/9150e 1.8GHz Quad, 4 gig ram... The Fedora installer only sees the 500g SATA drive, and not the 320g IDE drive where I want to install Fedora. Now I know that I can't always get what I want, but in this case I am not willing to mess with the working Vista installation just to get Fedora installed.
Vista BTW sees the 320 just fine. I am clueless as to where to begin with this. I gave up in Fedora with my Celeron based machine because of speed issues.... But this new box should have more than enough horsepower to run F!
Fedora Installation :: F11 On IP35 Pro - No SATA Drives
Jun 14, 2009I am attempting to install F11 from full media onto Abit IP35 Pro m/b connected to two (unitilized) Seagate 300GB SATA drives (7200.9) and attempting to create a software RAID1 setup as I have in FC8. I am using the graphical setup (as I have in other releases.) However, the ONLY "drive" shown when creating a RAID partion is /dev/mapper/nvidia_jhhdfjhf with free space of 286165 MB. There is not /dev/sda0, /dev/sda1 drives that I would have expected to see.
NOTE: All BIOS options for SATA are set to "IDE", not RAID or AHCI. The Seagate Seatools software sees both SATA drives and all tests are successful. What now? It seems like this is a major step backwards from F10. It does not seem mere mortals can install with RAID1 on this motherboard.
Red Hat / Fedora :: Unable To Install More Than 6 Sata Drives?
Apr 2, 2010The system is running great in fedora 7 or 12 with 6 sata drives installed. I tried to install 2 more sata drives(total 8 drives), tested some combinations: 6 drives in sata ports and 2 in sas ports, or 2 in sata ports and 6 in sas ports... the BIOS can detect all 8 drives, but the fedora 7 and 12 just detect 6 sata drives. It could be problem of sata/sas drivers of Linus. The chip set: Intel ESB2(6 ports) + LSI 1068E SAS controller(8 sas/sata ports) Linux: Fedora 7 and Fedora 12
View 7 Replies View RelatedRed Hat / Fedora :: RH8 Won't Recognize Newly Added Sata Drives
Mar 3, 2010I have recently added 2 500GB sata drives to my machine. I have a Supermicro X6 mobo (yes its rather old) and the Bios recognizes the drives as Master 2 and Master 3 ide , but the linux will not recognize the drives. The system is running RH8 kernel 2.4.31 and i dont have the option of upgrading the kernel at the moment. Is there any way to get the linux to recognize the drives?
View 8 Replies View RelatedFedora Installation :: Will F14 Detect The VT8251 Connected SATA Drives?
Dec 10, 2010There is a FC4 Server with A8V-MX mobo currently running 2x WD500 SATA drives in RAID1 with a third WD500 SATA drive for data backup. This machine has been running 24/7 since January 2007.The plan is to replace the WD500s with WD 2TB SATA II drives in a similar setup as above. i.e. 2 drives in RAID1 and the third drive for data backup.Definitely looking to do a clean Fedora 14 install on the 2TB but have some questions.
1. Will Fedora 14 detect the VT8251 connected SATA drives?
2. If not, how do I get drivers so it will? (I have the mobo CD with makedisk, but prob for windows)
I already have the 14 x86-64 DVD ready to go, but I am not yet at the site.the BIOS settings are: SATA, RAID or AHCI.
Fedora :: Can't Access Any Of The Other Hard Drives From The Other Drives?
Jul 5, 2011I have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies View RelatedFedora Installation :: Freezes As Soon As Pixelated Load Bar With White - Light Blue And Dark Blue Colors
May 30, 2011When i try to install Fedora 15 on a clean machine it freezes as soon as the pixelated load bar with the white, light blue and dark blue colors show.
I have tried several different versions of Fedora (64bit and 32bit) and have tried to burn it to a CD and/or DVD (For the larger version) and copying it to a usb pen with universal linux usb, liveUSB creator (from Fedora) and last one i don't remember the name on.
Fedora Installation :: Hard Disc Not Detecting For Seagate SATA Hard Disc?
Jul 15, 2009I have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View RelatedFedora Hardware :: Wetern Digital Caviar Green HDD?
Oct 6, 2010I'm setting up a new Linux box at home and going for a Mini-ITX. Of course my main choice of distro is Fedora 13. The site I buy computer parts from have discounts on Western digital caviar green 2TB drive, but read that it doesn't work good with Linux? Made a search here and seems to be some workaround to get it to perform better, but mostly people seem to suffer from using a Western digital caviar* on any Linux distro except Ubuntu 10.04.
The drive I've been looking at is WESTERN DIGITAL CAVIAR GREEN 2TB SATA/300 64MB. Have the Linux kernel made a fix for this drive or should I go for another brand? They also sell Hitachi, Samsung and Seagate on the site and so far SAMSUNG SPINPOINT F3 1TB SATA/300 7200RPM 32MB seems good. Also read Seagate baracuda discs are good.
Fedora Hardware :: New SATA Hard Disk Not Being Detected
Feb 8, 2011All of my computers are second-hand (except 1 laptop but it doesn't count) and I see in my Dell 4600 there are 2 SATA connectors on the motherboard. I picked up a 250 GB SATA hard disk and cables recently and tried plugging it in but the system doesn't see it. I even disconnected all other disks to make sure there wasn't a conflict (master/slave) issue going on but the system still does not see it.
The disk is vibrating so I assume it is getting juice and is spinning. Is there a setting or something I have to do to tell the system to access the SATA? Do I have to look at RAID settings if there is only 1 SATA disk? Can I not have a SATA disk and an ATA disk plugged in at the same time? I want to try and determine if the disk is bad, or is it PEBKAC!
Fedora Installation :: Sata Hard Drive Failure At Boot
Dec 27, 2010i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies View RelatedUbuntu Installation :: Ubunto 8.04 Cannot Detect Sata Hard Drive Or Sata Drive Cdrw?
May 28, 2011ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View RelatedGeneral :: No Hard Found, When Installing RHEL5 On SATA 3 Hard?
Mar 20, 2011I tried installing Red Hat linux on my Sata hard disk . As soon as the hardware detection phase starts it generates the error "No hardware detected".roblem? (I have also tested RHLE 5, CentOS 5.4, but none of them detect the hard disk and I can not install anyone).I have installed Windows 7 on one of my disks and I have not any problem with it.I also changed storage configuration in Bios as AHCI, IDE,
My Hardware config is as below:
Mainboard: ASUS P6X58D premium,
CPU: core i7 950,
HDD: two 1 TB WD SATA3
Ram: 6 GB (3*2 GB cruciall[/U][/U][/B]
Server :: 2 Separate External Hard Drives With ESata To Minimize An Electrical Failure To The Drives?
Mar 26, 2011I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies View RelatedHardware :: Using Fdisk On SATA Drives?
May 23, 2009Does anyone know if fdisk is currently blind to SATA drives? If so, is there an alternative command one can use to list ALL partitions, mounted and unmounted, that are available to the system?
View 12 Replies View RelatedFedora :: Auto Mounting Hard Drives?
Aug 10, 2009I have a fresh installation of Fedora 11 and I am having a hard time figuring out how to automount my storage drives. Each time I login, I try to access my various storage drives and gnome makes me authenticate asroot before mounting it. FSTAB lists only logical volumes but not my storage drives. What can I do to make sure these automount when I login?
View 3 Replies View RelatedFedora :: Clone The Identical Hard Drives?
Jan 12, 2010I have two identical 73 GB Scsi ulta320 scsi drives, Fedora web server is install on one drive with all web files and etc. I wish to make an exact clone of the drive that will boot and run everything as the current drive does now. Is there a download of a program I could download or purchase that would boot and make an exact clone to do the above.
View 6 Replies View RelatedFedora :: Get The UUID For Some Of External Hard Drives?
Apr 7, 2011I am trying to figure out how to get the UUID for some of my external hard drives.the internet revealed a couple of promising leads, this is what I have tried so far:
ls -l /dev/disk/by-uuid -> didn't list the hard discs
blkid -> didn't list the hard discs
lsusb -v -> listed the hard disc but no uuid
A normally formatted usb key is listed with uuid. The external hard discs are fully encrypted by truecrypt(realcrypt). I have been reading not so great things about that itself, but for now I don't have a promising alternative that I can use with windows as well.Any google searches don't seem to cast any new light on this for me,I'd be open to suggestions if there's a better way to get a definite ID for a hard drive... I just need to be able to mount it with realcrypt