Fedora Hardware :: Toshiba A665 Laptop Keyboard Backlight No Workee?
Jan 3, 2011
I have a Toshiba A665-S6092. Core i7 CPU and I installed a Kingston SSD so it's up to the job. It supposedly has keyboard backlight but I can't figure out how to get that function functioning. Now, I know this ain't real important but I have a feeling other people might like to have that too so I'm asking. Does anybody in Fedora Land have any experience getting Toshiba keyboard backlight working? Maybe I'm wrong about it having this option, I can't find any mention of it using all the tools at my disposal. lspci, the Gnome device lister, xorg keyboard config, etc. Apparently everything except the right thing. I've Googled until I'm Googleyed and searched this forum and LinuxQuestions.org (which seems to have been hijacked by Slackware fanatics over the last few years) and other forums like JustLinux, Linux.com. I can't remember them all. I've looked through source code that I could make no sense of and wondered why I was pretending to be qualified to do that until I realized how important this has become to me, although it is as I said a relatively trivial matter. If anybody knows and wants additional information I'll be more than happy to supply it. I'm running the default kernel for Fedora 14 64 bit, 2.6.35.6-45.fc14.x86_64.
View 4 Replies
ADVERTISEMENT
Sep 4, 2010
I have a Toshiba A665-6050 with a microphone that does not work. Could someone walk me through getting it to work please?
View 9 Replies
View Related
Dec 12, 2010
I'm trying without success to install 10.10 on a Toshiba Satellite A665 from a USB drive. It will start to boot then gets stuck on:
NET: Registered protocol family 1 I've tried different iso's and different usb drives.Other threads have mentioned that setting acpi=off might work but
1) how do I do that and
2) what else might that effect?
View 1 Replies
View Related
Jan 16, 2011
i have toshiba satellite A665 4 days ago i tried to talk with my friend through laptop playback microphone .. i could hear him but he couldn't hear me .. i tried everything but the problem still remains !
View 6 Replies
View Related
Dec 4, 2009
With keyboard : Illuminant model SK-020EL See next post for a workaround.
ETA : Code now works for my keyboard.
View 1 Replies
View Related
Aug 11, 2009
I just finished installing Fedora 11 and I'd love to love it but the issue is I can't see the screen without straining my eyes. So I bring to you almighty support forum a challenge: Need to enable the screen backlight. The laptop model is an Asus G50-X5
View 1 Replies
View Related
May 30, 2010
Just upgraded to 10.04. Everything seems to still work on my Macbook, with a bonus being the buttons to modify the keyboard backlight brightness seem to work now.
However, the only caveat is that I can't seem to turn off the backlight. Pressing the dim button all the way to off just seems to reset to full brightness. Even if I set the brightness to 1 (almost off), the backlight seems to reset itself to full brightness at seemingly random times.
Running this command used to turn it off, but now doesn't work:
Code:
echo 0 | sudo tee -a /sys/class/leds/smc::kbd_backlight/brightness
Is this a bug? How do I turn off the keyboard backlight?
View 3 Replies
View Related
Feb 24, 2011
I've finished integrating proper keyboard backlight support into gnome-power-manager (which in turn uses upower to actually control the keyboard backlight) which with any luck will be available in Natty out of the box. A similar patch should also land upstream too so Fedora etc should get it for free too in their next release too. In essence this allows us to provide the user with greater feedback and control than say just using pommed (ie. we can dim the keyboard on idle like the lcd display etc, and can display nice notifications of the keyboard backlight level too - see attached screenshot).
View 9 Replies
View Related
May 5, 2010
I have an Asus P50IJ-X2 and in lucid the backlight cannot be adjusted. The panel app doesnt work, when I click on it and try to adjust the slider it just disappears. When I reopen it the slider is at the top left corner of the screen.
The function keys seem to be detected alright, but when I press them I get the notification that the brightness is going down but nothing happens. Also after the first press the notification gets extremely laggy. If I press the brightness keys again it takes 30 seconds or more for the notification to show up. Also after the first press my volume function keys have the same behaviour in the notification area as the function keys.
Also messing with the controls in the power settings doesn't do anything. The strange thing is all of this worked perfectly in Karmic. The function keys, auto dimming, everything just worked out of the box. I have no idea where to start trouble shooting this so can anyone give me some direction?
View 1 Replies
View Related
Mar 9, 2010
The sound on my system is really low. I am using a Toshiba Tecra M3 laptop with Intel sound.
Here is my uname info:
Code:
2.6.32.9-67.fc12.i686 #1 SMP Sat Feb 27 10:00:02 UTC 2010 i686 i686 i386 GNU/Linux
I tested both Rhythmbox and Gnome Mplayer. Both are low when using headphones and very low when using the laptop speakers. I checked the alsa configuration via alsamixer -c0 and everything looks good. I have attached my alsa-info.txt file.
View 1 Replies
View Related
Jun 7, 2010
I did a clean install of Fedora 13 on my Toshiba A500 laptop. Suddenly the keypad stops working. no numbers?
View 2 Replies
View Related
Jun 29, 2010
I have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc
View 2 Replies
View Related
Jan 23, 2009
I have Toshiba Satellite L305-S5907 laptop with Microsoft Vista.I tried installing Fedora 9 on my laptop but GUI is not loading on it,system will try to load GUI and showing different colors of lines and screen blinks continously , but desktop is not loading .
Laptop Monitor specification is 15.4� diagonal widescreen TruBrite� TFT LCD display at resolu1280x800 native resolution (WXGA).Except GUI everything is working fine.I tried startx command but then also same scenario is happening. Graphics details: Mobile Intel Graphics Media Accelerator 4500M with 128MB-1759MB dynamically allocated shared graphics memory
View 1 Replies
View Related
Nov 29, 2010
I am trying to install Realtek RTL8192E wireless drivers for Toshiba satellite 510 in Fedora 14 KDE SPIN. I have been searching it for long time. I am not getting any tutorials or any methids to get this sorted.
View 1 Replies
View Related
Oct 28, 2010
I can't get Redhat (Fedora) to mount my usb Flashdrive. My windows O/S has no problem with my usb flashdrive. I can mount my CD Drive and my Floppy drive. My mouse is pluged into one of my usb slots and it works. What am I doing wrong.
View 1 Replies
View Related
Jan 16, 2010
I'm using a Toshiba Satellite A200-21T LapTop with Ubuntu 9.10
I used to have dual boot with windows Xp but i shoot windows out (Sorry bill )
In windows i was able to use bluetooth with my nokia phone.
The wireless hardware button in the laptop is on. There is no option it the bios to turn off the bluetooth, so i'm sure that the machine is booting with bluetooth on.
i run this command in terminal:
Code:
ruival@ruimadlinux:~$ cat /var/log/dmesg | grep Blue*
[ 0.380007] Bluetooth: Core ver 2.15
[ 0.380012] Bluetooth: HCI device and connection manager initialized
[ 0.380014] Bluetooth: HCI socket layer initialized
[Code]....
View 2 Replies
View Related
Apr 16, 2011
CPU fan apparently is not working with Debian (or Kernel, I don't know who's responsible for ACPI devices management. ).After setting up lm-sensors to show core temperatures, and running a simple "while(true);" C program, I noticed the fan doesn't turn on until the temperature reaches 80 degrees Celsius, and when it does, it runs at what appears to be full speed (VERY noisy). Also, it stays turned on at that speed even after temperature gets below 35 degrees Celsius. The only way to turn it off is to put the computer to sleep and wake it up again, but if I do the same procedure, it happens again.
I think it is related to some compatibility problem with ACPI devices because when I turn on the computer, I can't get the Fn keys to work, but after I suspend and wake it up, I can control the brightness using the Fn key and use the Play, Pause, etc. buttons. I read this has something to do with ACPI issues, the same as the fan control issues, because "try to suspend and wake up the computer" is something people usually tell to others with this problem (I assume just to confirm the diagnostic).Everything works fine on the pre-installed Windows Vista that came with the computer. It's definitely a compatibility problem.
I've read a lot in forums, even here, but I couldn't get any solution for this. I installed toshset but asks me to enable a Kernel module which I have no idea of how to load. I have no idea of how to load a Kernel module in fact.Also, I didn't want to believe, but I read there's no solution for this (at least, not one which doesn't involve a lot of knowledge on the matter).I'd like to stay with Debian, so I'm doing my last try here before installing other Linux Distro. I hope this problem is about Debian and not all Linux distros.My laptop is a Toshiba Satellite L355, Intel Pentium Dual Core T3200. I bought it in the end of 2008, so it's kind of old.
View 6 Replies
View Related
Jan 3, 2010
I feel I am really really close at getting this connected.
The native ath9k driver did not work. I blacklisted this driver and then proceeded to load a windows driver that came with the card through ndiswrapper.
The system sees my wireless router but I could not get connected to the router. I get the circle of death of it trying to connect though.
I then replaced the Network Manager with Wicd.
I try and connect, after setting the preshared key, and it stops at the very end saying it could not obtain an IP address.
I then try to set a static IP, and at the very end it comes back with, "could not contact wireless access point".
I feel I am so close to getting this connected I just don't know if it is a setting on my router I need to change or to look for a different driver. Driver should be fine but I'm no expert.
I have two other computers wireless'ly connected to this router currently and one of them is connected via a dual boot, Ubuntu and Win7, so at the very least these two computers don't have any issues connecting to the router.
Or I am just going to live with WinXP installed on it instead. BTW: I had no problems getting a wireless connection from this laptop when I had WinXP installed, but I have since wiped it off with a clean install of Ubuntu 9.10. Goes to show how much I want to rid myself of Windows on the laptop.
I even installed 8.04 to see if I could make a connection with that version but to no avail I could not. I have since reloaded 9.10.
View 1 Replies
View Related
Sep 26, 2010
I have a Toshiba Satellite A660-056 which works beautifully except that the built in mic and the headphone jack don't work. For the microphone, no input device is listed in the Sound Preferences control panel. When I plug in headphones, the built-in speakers go quiet but nothing goes through the headphones.
Here's the info
Code:
uname -a
Linux satelliteoflove 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010 i686 GNU/Linux
Code:
sudo lshw -C sound
*-multimedia
description: Audio device
product: High Definition Audio Controller
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=HDA Intel latency=0
resources: irq:16 memory:b3000000-b3003fff .....
View 6 Replies
View Related
May 4, 2010
Just resently I managed to activate internal bluetooth adapter. I'm not expert in command line and everything I could was done in GNOME. Same like most other systems an icon appears in panel bar whenever I used to type <modprobe omnibook ectype=14>. It took me some time to set everything with the kind help from URL... So the thing is that after fingering with some newly installed packages concerning b-tooth utilities that icon is gone and b-tooth is not active.
View 2 Replies
View Related
Jan 3, 2010
Running OpenSuse 11.2 from live dvd. When it starts up, the screen gets filled with vertical green and black lines, with about a 1 inch square in the middle that moves as the cursor. Nothing else is visible.I've tried each of the video options, with the same result. Is there any solution to this?
View 1 Replies
View Related
Mar 25, 2010
get the wireless working on my mum's laptop as having to plug it into the router everytime she wants to go online is now becoming an issue for her. I recently upgraded it from 8.04 to 9.04. Ive tried using the Windows Wireless Driver option in System - Admin but to no avail.
Laptop Toshiba Satellite L300D-13D
$ lspci, returns the following
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
[Code]...
View 9 Replies
View Related
Mar 28, 2010
i want to buy a laptop and stuck between choosing a Dell or Toshiba. Which brand it more reliable and last longer(as in how many years) from your experience or knowledge?
View 9 Replies
View Related
Jul 3, 2010
I have recently installed Ubuntu on my Toshiba Satellite A25-S207 Laptop. Everything runs great except that the resolution will not go above 800x600. I had this problem before on the same laptop and was able to fix it but cannot find the fix now (I had to wipe my laptop clean in order to remove some pesky Windows partitions and reinstall Ubuntu) I have found several "fixes" but none work. I tried the one below as well as it applies almost perfectly to my problem
"I just installed the latest ubuntu 10.04 on a Toshiba-Tecra having "Trident Microsystems Cyberblade XP4m32" Monitor. After install resolution is defaulted to 800x600. I followed a method advised in some threads (arount xrandr and cvt) to increase the size (my laptop works with 1024x768 under XP). This was done OK and I obtained the resolution 1024X768 appearing in the drop list resolution options of the Monitor preferences but when I select the option if fails. Alternatively, when I execute $ xrandr --output default --mode 1024x768_60.00 i got the message "xrandr : screen cannot be larger than 800x600 (desired size 1024X76
I also saw a possible fix proposing to add "HorizSync 31.50-48.00" in Xorg.conf but I then I DO NOT have such a file in my /etc/x11/ after ubuntu install (supposing that this will fix my problem !!!)
Boot into recovery mode, when you get to the command line type:
sudo Xorg -configurewhich will create a default /etc/X11/xorg.conf file. Add the lines:
HorizSync 31.0 - 70.0
VertRefresh 40.0 - 75.0to the Monitor section then reboot."
However when I entered the "sudo Xorg -configure" line my computer spit back saying that "sudo" is not an acceptable command
View 9 Replies
View Related
Oct 31, 2010
My Toshiba A300 laptop turns itself on after about 4 minutes from the shutdown. This doesn't happen with Win7. When it turns on, I shutdown using the power off button and it doesn't turn on again. I disabled all the wake options in the BIOS, also I uninstalled the ACPI, but this did not help. I also disabled the WOL in Ubuntu with "sudo ethtool -s eth0 wol d" before the shutdown, but this didn't helped too.
View 8 Replies
View Related
Jan 8, 2011
I had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?
View 3 Replies
View Related
Mar 26, 2011
Capitols v and m not working properly! Toshiba laptop. So far I'm v happy with Ubuntu, works really well! However, I have a madening problem: when typing I cannot use the right hand Shift key with either or if I do, the v looks like $V, and the capitol m ends up giving me a pulldown menu. I assume this is not common to Ubuntu, but maybe it is?
View 5 Replies
View Related
May 15, 2011
I have a Toshiba laptop with dual boot W7 & Ubuntu 11.4. Evolution Mail Program was installed and running perfect. My mistake was to try to import my e-mail contacts address book backup for evolution,ever since I cannot start it as it shows a notification that it is still migrating my files. I have uninstall and install the same program but unfortunately the issue remains and I can no more start my evolution email application.
View 5 Replies
View Related
Feb 22, 2010
I recently installed FC11 on my Toshiba L500 laptop. After installtion linux is not detecting wireless adaptor. I believe toshiba L500 has realtek RTL8191SE CAN 802.11n PCI-E NIC adaptor.
View 10 Replies
View Related
Jul 22, 2010
I'm having a lot of trouble finding a good Linux Distro that will work with my Toshiba A505-S6020. Here are some specs
i5-430M Intel Processor
4 GB RAM
NVidia Graphics Card
Realtek Network Adapter
One of the big problems I'm having is with the Network Adapter. It won't work with Ubuntu or any Ubuntu based distros. Backtrack 4 won't even start for me (there's a problem with the ACPI, and I'm not sure how to turn it off on Backtrack). Is there any distribution that I won't have to mess with the Kernels too much (I tried Gentoo, but that was a bit over my head)
View 6 Replies
View Related
