Fedora Hardware :: Can't Access LG Vu C920 Phone USB Files In F12?
Jan 31, 2010
In F10 I could access Pics, Music, Video, etc files on the USB card with no problem. In F12, nada.lsusb sees the phone, lists it as ID 05c6 : 1000 Qualcomm, Inc.When I hotplug the phone on a F10 install I see that it loads 3 modules. vfat, fat, and usb_storage.So, on the F12 install I modprobed those drivers, plugged in the phone, and still no trace of it.I get the feeling that I'm supposed to modify some udev or hal files to get this thing working again, but
I have a dell precision m4300 laptop with a 360 wireless bluetooth dell adapter On my system there is a debian lenny with kde3 and backported enable(everythings is p to date except bluez-utils and bluetooth holded at version 3.36-3)
Nowadays bluetooth more less works fine, I can send and receive single file to/from my phone (nokia n70)
The hell begin when I try to browse my phone files from konqueror...with bluetooth:/ I can see the list of all the device near me with sdp://[address]/ i can see two icons (obex file transfer & obex object push) but I cant see or access to any file or folder into the phone.
I also try to update my bluez-utils to 4.60-1~bpo50+1 but in this case kbluetooth totally fail and a see the contextual menu of the system tray icon all disaled.
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I just got an Evo 4g(great phone) but when I attach it to my computer via USB I can't access the memory card. Linux recognizes it as an Evo and shows it as a USB drive but nothing happens when I try to open it as a folder.
I have recently installed open suse 11.2 on my hp hdx18 laptop replacing windows 7. trying to use my phone as a bluetooth access point so i can connect to the internet when im out and about and there isnt a bt openzone network around. my phone is a sony ericsson w910i. i can connect to my phone via blue tooth and use it as a remote control and browse, send and receive files. but cant figure out how to use it as an access point to the internet. win7 had an option to connect via access point giving me instant internet access over the vodafone mobile phone network, but i cant find an option like that in open suse, if there even is one.
I can pair my phone and laptop using bluetooth, from Network manager I can select my phone and make a connection. But then I can't access anything.I looked at the connection info from nm and tried to ping the given dns addresses. That failed. And I pinged those addresses when I reconnected with wireless and it failed. So, where are these setup? I didn't do it
I've a Nokia 2323 Classic which I want to use to access to the internet on my laptop.
A friend of mine with a Dell Inspiron 15 running Windows 7 could connect to the net by just pairing up and right clicking on my phone's icon in the devices menu and selecting connect to internet via access point.
I've an eMachines E725 which lacks bluetooth. To overcome this I used a dongle which was able to successfully pair up with my phone via the bluetooth menu in preferences.
So what next ? How do I use the phone to connect to the internet directly via access point ?
I noticed that I did not need any operator related settings to do so in windows 7 and the phone worked regardless of SIM card present so I assume it should work similarly in linux.
What is left is to ask the system to treat it as an internet access device and use it that way.
How do I do it ? I don't mind a commandline way but a GUI would be better because I'm not the only person using my laptop.
I would like to download a few (591)images from the Galaxy S phone. Samsung have advised me that to do that I need to place the Galaxy S phone on Mass storage, whivch I can do and plug the phone USB cable to the PC and manually mount the USB. The Galaxy S firmware 2.1-update1 doesn't support automatic mounting! The Galaxy S has an Android platform Kernel version 2.6.29 with root @SE-S604 #2. I'm running Ubuntu 10.04 on a AMD Athlon(tm) XP 1700+ with 1G of ram. It's the manual mounting of the USB connection
I'm using my phone with TrekBuddy to contribute to Open Street Map and find it a bit awkward to bluetooth or removing the memory card from the phone to use USB directly. So I've been struggling some time to solve this issue, without any luck.Contents from my TrekBuddy directory on the memorycard on phone:Quote:
> ls -l totalt 382 -rw-------. 1 dag dag 195409 2010-07-11 13:28 20100711-123727.gpx
It's installed as a mobile broadband connection. Only works if my phone is plugged in during boot, otherwise plugging in my phone does nothing. For example, I booted my netbook earlier today but my phone wasn't plugged in. Tethering did not work, it just acts as if it isn't present. I rebooted (with my phone still attached) and now tethering magically works.
+ I had struggled with getting it to work on 11.3, KDE 4.4. Brought in the KDE 4.5 repos and did zypper dup with fabulous success. Bluedevil 1.0-2.9 was a charm.
+ We're only days away from 11.4, and that was so painless I figured I'd go ahead and upgrade to 11.4. After hours of RTFM on zypper I got all the 11.4 repos (all I could find) and did zypper dup again.
+ Smooth, painless. Geen probleme.
+ Except: - the upgrade also upgraded bluedevil to 1.0-3.8.1. I've tried rolling back but the problems remain.
+ The problems are: - I cannot send files from the PC to the phone, although I can send files from the phone to the PC.
- The PC prompts are very short-lived and are obscured by the taskbar unless you are primed for them to bring up the notification manager instantly, so pairing from the phone to the PC is difficult
-I cannot browse the phone despite the app suggesting I can. I also had to manually install a directory (/home/$user/$phone_name) to avoid an error message. Presumably the app tries to mount the phone to this directory, but it does not succeed.
+ I do think I have all the necessary devel files, but would love to do a file list comparison with someone who has this working on OS 11.4/KDE 4.5.5 Yes, I know this is beta so don't abuse me, I'm more than willing to do trials and submit explicit data as I have here. But I also would like to get it to work. I had it working on 11.3 / KDE 4.5.5. FWIW, pretty much everything else works flawlessly on OS 11.4. Firefox 4 beta has a few problems, but that is not an OS 11.4 issue...
I can send files to my bluetooth mobile phone, but when sending a file from the phone to the PC, the phone issues an error message "Sending failed", and I can not figure out, why. /var/log/messages does not contain any related entries. Do you have any idea where to look for the problem? I am using KDE. I found many complaints about the same problem, but they all date from 2007-2008, so I guess this is not the same problem.
I am having an problem with bluetooth. Computer seems to find my mobile phone, I can send files from PC to my phone, but not vice versa. As I try to send, it pops "Failed" (in phone) and nothing happens. Kubuntu 10.04 Windows mobile 6 (HTC p3450).
I installed oreka and can make succesfully call recordings. The problem i'm facing is when i record a call and check the details in database, localparty, remote party fields are storing with source and destination ip address not with there phone numbers.
I have a mobile phone (T68i) attached to my server and everything works fine. But sometimes the phone craches and needs to be rebooted wich is quite annoying.So I want to use a newer phone that is not 10+ years old :-)But when using a K610i or C702 the phone does not appear on /dev/ttyUSB0 as expected.When inserting the usb cable a dmesg gives this:
Code: [5924924.451033] usb 1-3: new high speed USB device using ehci_hcd and address 19 [5924924.576728] usb 1-3: New USB device found, idVendor=0fce, idProduct=d0d9
how to transfer files from my mobile phone to my opensuse 11.4 pc via bluetooth? ntw i need to buy a bluetooth car or equivalent maybe is there something common, chip and easy to set up?
I'd like to put a few MP3s on it but I'm not able to connect to the phone via USB on my xubuntu box to drop files onto it. It works on my company computer (Windows XP) so I know it's not a problem with the phone.
I'm still somewhat of an ubuntu noob so it may be a quick fix that I have overlooked/don't understand yet. Once I plug the phone in to the box, I tell Android to enable USB storage and mount the drive. Here's the error I get afterwards:
Quote:
Failed to mount "3G Removable Volume".
mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so.
Here's the settings set in Storage Device Manager:
I set up nginx on a VM somewhere and everything is working fine. Then I tried to build some directory structure under the nginx root HTML folder. I received 403 forbidden for a file so normally I assumed permissions. Using root I gave entire dir structure chmod -R a+r /usr/share/ngnix/html/myfolder. Still 403. Then I SFTP'd into this box using a didcated web FTP account. I am not that experienced to be able to tell how is this user set nor which permissions it has, but by default it can view all directories in the system. When navigating to the HTML root I could see myfolder but when going inside I was seeing nothing. No subfolder, no files. needless to say ls -al from bash on any of these is giving me rwxr--r-- for all files and directories.
if I copy some arbitrary file from within the myfolder dir to html root and give it a+r it IS accessible from web and SFTP. If this were only a 403 I would assume something I am not configuring properly on nginx, but since SFTP is showing same behavior I am led to believe it is something in the directories themselves!? What else is there besides file permissions?
I have 2 users: carol, carol2 and 2 files in /: filea, fileb. I want to carol has access only to filea and carol2 only to fileb. I need to do this with MLS (range). I dont want do this with levels because user that is higher has access to both files. How to do that?
I am somewhat new to Fedora, only having F13 for 2 months and F12 about a year ago on my dieing AAO. Anyways...I am trying to get the Apache web service up and running. Type in http://localhost and I get the Apache welcome screen. Now I try to add my webpages to /var/www/html/ and it says Error Moving File: Access DeniedI tried to find where to login in as root and find nothing. I am VERY unfamiliar with command line prompt other than for the yum installs
Last week some bad news hitted us, my uncle deceased at the age of 39, to young and very unexpected. We enherited his computer, but theres a password on his account. Googling didnt really worked for me.. I have totally 0 experience on linux systems. Is there a way to 'hack' his account and get access to his files, fotos and other stuff that is precious to us?
I made a clone of my ordinary disk with Clonezilla some times ago. Now I want to access some files on that cloned disk. Since the cloned disk also has a LVM structure I don't know how to mount it. When I connect the cloned disk I can see both /dev/sdb1 & sdb2. vgdisplay -v gives me:
I am trying to access my Windows 7 files from Fedora 15. can view the Windows network from Linux and it displays the laptop fine. I can view the folders on the Windows 7 laptop but I can't access/open them. I receive an 'Unable to mount file' message in Linux. I have Samba installed and running fine. Is there something I have to change in the Linux firewall or samba.conf?
I would like to be able to access my data file that reside on my Linux machine at home from the Internet but I don't want to open any "doors" for lack of a better word that will compromise the security of my files. I am running F11 and I am using cable broadband and a Linksys router.I have been able to get ssh working with OpenSSH while I am at home but I don't really need or want to ssh remotely, I would rather setup what I think is called an ftp. I just want to be able to up and download files to my Linux machine.
